Datasets:

saheedniyi

/

naijaweb-edu2

like 0

There have been several conspiracy theories surrounding taking the COVID-19 vaccines even before they were discovered. Most of those conspiracy theories were borne out of religious and social factors, as well as outright fake news. Now that the vaccines have been made available in most countries, including Nigeria, there have been concerns in some quarters as to the efficacy of the vaccines, particularly the Oxford-AstraZeneca vaccine, whose use was suspended by some countries recently due to presumed cases of blood clotting after use. There is, however, no reason to be afraid. The cases of blood clotting recorded were minimal. Moreover, clinical trials conducted by the European Medicines Agency and the United States have found the vaccine to be “safe and effective,” offering complete protection against the worst outcomes from COVID-19 while causing no serious side effects. The vaccine is even now being used again by countries that earlier suspended it. In fact, all the vaccines approved for use globally have been tested and trusted because like other drugs, the COVID-19 vaccines went through multiple phases of rigorous testing, analysis, and review. The clinical trials for the COVID-19 enrolled far more participants than other vaccine trials. Also, agencies such as the US Food and Drug Administration closely monitors the vaccine development process and testing results for efficacy and safety. As part of the FDA’s formal process to determine if the vaccine is approved for public use, it also seeks a recommendation from a multidisciplinary team of experts consisting of independent medical officers, microbiologists, chemists, biostatisticians, and other health experts. But if you still have concerns about the safety and effectiveness of COVID-19 vaccines and among those feeling hesitant about getting a COVID-19 vaccine, below are 10 reasons why you should consider getting vaccinated. To help stop the pandemic According to the US Centres for Disease Control and Prevention, wearing face masks and social distancing help reduce your chance of being exposed to the coronavirus or spreading it to others, but these measures are not enough. Vaccines will work with your immune system so it will be ready to fight the virus if you are exposed, the CDC says on its website. The agency states that the combination of getting vaccinated and following COVID-19 safety protocols offers the best protection from COVID-19. “Stopping a pandemic requires using all the tools available,” the CDC says. It helps from contracting the virus COVID-19 vaccines were evaluated in clinical trials and have been approved because the studies show that the vaccines significantly reduce the probability of contracting the virus. Based on what has been proved about vaccines for other diseases, the COVID-19 vaccines may help keep you from getting seriously ill, even if you don’t get the virus. Getting vaccinated also may protect people around you—particularly those at greater risk for severe illness from COVID-19. YOU MAY ALSO LIKE: Why UTME students must use NIN to register –JAMB registrar A professor of medicine at the University of Alabama at Birmingham Division of Infectious Diseases, US, Michael Saag, says the true value of the vaccine is more easily noticeable than if the vaccine development had failed. “We would have been faced with an exploding pandemic for which there was no end in sight,” Saag says. “It might continue to burn through the population for another two to four years.” He adds that the vaccine works at an almost unprecedented level of effectiveness. Side effects are usually mild, temporary Experts at the University of Colorado Boulder Medical Services, US, say it is important to remember that side effects are normal (they may be more common after the second dose) and show that your immune system is building up protection against the virus. However, many people do not even experience side effects after vaccination. But if you do experience side effects, they are usually mild and go away within a few days. Common vaccine side effects include pain or swelling at the injection site, headache, chills, tiredness, and fever. The vaccines don’t alter DNA One of the conspiracy theories that sprang up is that taking the vaccine could alter the human DNA. But it is outright fake news. Saag says these mRNA vaccines give instructions to our cells to make a harmless piece of what is called the spike protein. The spike protein is found on the surface of the virus. “COVID-19 mRNA never enters the nucleus of the cell, which is where DNA (genetic material) is stored. Once the instructions are inside your muscle cells, the cells use them to make the protein piece, then the cells break down the instructions and get rid of them,” he says. “Next, the cell places the protein piece on its surface. The immune system spots the protein and begins building an immune response and making antibodies to fight the infection. At the end of this process, our bodies have learned how to protect against future infection,” Saag adds. Prof Martin Michaelis and Dr Mark Wass of the School of Biosciences at the University of Kent, United Kingdom, also debunked the theory that the vaccines alter the DNA. “None of the vaccines interacts with our DNA. Hence, a manipulation of DNA is technically impossible,” they say. Vaccines save lives An Associate Head (Students), School of Biological Sciences, University of Portsmouth, UK, Alessandro Siani, notes that things have come a long way since Edward Jenner first vaccinated a young boy against smallpox in 1796. The World Health Organisation estimates that vaccination currently prevents two million to three million deaths every year. Siani says, “Smallpox, which claimed approximately 300 million lives in the 20th century alone, has been fully eradicated thanks to the development and implementation of safe and effective vaccines. “For some people today, COVID-19 also proves fatal. If you’re at high risk from the disease, getting vaccinated could save your life.” To protect and support health services An Ibadan, Oyo State-based public health expert, Dr Kunle Adedapo, says receiving a vaccine means that you are less likely to contract infectious diseases on your lifetime. This, in turn, relieves the pressure on health workers and the health system. “When we relieve the health workers of some pressure, they can then dedicate their efforts, funds and equipment to helping patients with non-preventable illnesses. “So getting vaccinated against COVID-19 will help in exactly the same way – freeing up resources by lowering case numbers and preventing further backlogs of other treatments,” Adedapo tells Saturday PUNCH. The expert also states that when enough people are vaccinated against an infectious disease such as COVID-19, it can be effectively stopped from spreading, because there are too few people to infect. He says this is known as “herd immunity.” “Reaching herd immunity means that even those who cannot receive the vaccination, perhaps due to some medical conditions) are protected,” says Adedapo. YOU MAY ALSO LIKE: Petrol price hike only after negotiation with labour — NNPC To save time and money Siani of the University of Portsmouth says vaccines have been widely recognised as one of the most time- and cost-effective medical interventions one can have. “Receiving a vaccination only takes a few minutes and is very cheap (or, for many people, free). “On the other hand, contracting an infectious disease means taking time off from school or work and potentially racking up hefty medical bills,” he says. To limit drug resistance Antimicrobial resistance has been identified by the WHO as one of the 10 greatest threats to global health (as has vaccine hesitancy). The continuous overuse of antibiotic and antiviral drugs causes bacteria and viruses to become resistant to them, resulting in untreatable infections spreading. By preventing us from getting infected in the first place, vaccinations allow us to reduce our use of antibiotics and antivirals, therefore limiting the insurgence of drug-resistant strains of bacteria and viruses. To restore society to normal Who is not tired of lockdowns and restrictions? Everyone probably is. However, for these measures to be lifted and for society to return to normal, it is important to get vaccinated so as to prevent spreading the virus when we fully start interacting with one another again. According to medical experts, a vaccine is the best and only way to return to life as “normal,” or closer to what it was before COVID-19. While it will take some time to roll out vaccines to everyone globally, every individual vaccinated is a step in the right direction, even as people continue to follow the safety precautions. In addition, Siani says another benefit getting the COVID-19 vaccine offers is to be able to travel safely. He says, “Travelling to other countries exposes you to pathogens your immune system is not familiar with. By receiving the vaccinations recommended for your destination, you’ll be able to enjoy your holiday without this risking an emergency visit to a local hospital or bringing back unwanted bugs. “Likewise, keeping up to date with your recommended vaccination schedule protects the inhabitants of your holiday destination from any infections you may otherwise carry with you. For this reason, COVID-19 vaccines could become mandatory for travel as they are rolled out.” To protect future generations Siani says that over the course of history, humanity has had to coexist with many debilitating and life-threatening diseases that are now rare thanks to childhood vaccination programmes. He says, “However, the pandemic provides a dramatic example of the devastating global effect that a single disease can have in the absence of a vaccine. “Immunising ourselves and our children against infectious diseases today is an invaluable gift to future generations. Suppressing diseases in the present will allow people in the future to live longer and healthier lives.” All rights reserved. This material, and other digital content on this website, may not be reproduced, published, broadcast, rewritten or redistributed in whole or in part without prior express written permission from PUNCH. Contact: [email protected]

https://punchng.com/10-benefits-of-getting-

en

Teaching English in Korea: About Korean Food Before taking off and teaching English in Korea, you need to learn more about Korean food and what your taste buds will be experiencing, as it is an adventure in and of itself! Korean food is sure to leave every expat’s pallet wanting more. At first you may find it spicy, even exotic, but you will quickly adapt and never look back. Korean cuisine is so vast that you may not even have a chance to sample all of the wonderful, full-flavored dishes that there are to explore. Even if you are not used to ethnic foods, it is best to put the effort forth and try some dishes, as you will thank yourself for it! Korean food is part of the foundation of Korean culture and pride. The sheer quantity of dishes, variety of side dishes, and nutritional value of the dishes all contribute to this pride. The Korean meal typically is inclusive of a big bowl of hot soup, many side dishes, rice and a barbeque plate for cooking meat. Korean dishes are mostly free of unhealthy deep-fried foods. Eating is communal in Korean culture. Everyone at the table eats from the same bowls and dishes or off of the same grill when table cooking for dinners like ‘gal-bi’ or ‘sam-gyup-sal’. Don’t be surprised if you see a roll of toilet paper on the table, even in nicer restaurants, as this is simply a replacement for napkins or paper towels. In order to get a server’s attention in a restaurant, patrons simply yell out “Yogi-yo!” meaning, ‘I’m here’. The server then tends to the table and often takes care of cooking the meat on the grill. This might not be the best method to practice in your home country, but it is the way things are done in Korea. Tipping at a restaurant is also not practiced in Korea, so you need not feel rude when leaving exact change after your meal. History of Kimchi Kimchi has been in Korean culture for over 3000 years. It is not only a staple at every meal; it is also used to cook a variety of Korean dishes. The Kimchi Museum in Seoul has documented 187 varieties of historic and current recipes. Koreans claim that it is one of the healthiest foods in the world, a statement which has been backed by many Western nutritionists. It is packed with vitamins A, B, and C, but the “healthy bacteria” called lactobacilli, which is found in fermented foods like yogurt and kimchi, helps with things like digestion. Even more importantly, studies have shown that fermented cabbage has elements that may prevent the growth of cancer. Top 10 dishes that are a “must try” for every new person to Korea: 1. 김치 (Kim-chi): fermented napa cabbage, this is Korea’s national dish, and is eaten with every meal 2. 김밥 (Kim-bap): Korean sushi 3. 만두 (Mandu): Korean dumpling 4. 비빔밥 (Bi-bim-bap) mixed rice with vegetables, egg and spicy sauce 5. 삼겹살 (Sam-gyup-sal): pork that you barbeque on a table grill, a traditional dish 6. 갈비 (Gal-bi): beef that you barbeque on a table grill 7. 불고기 (Bul-go-gi): marinated beef – can be sweet and salty 8. 떡볶기 (Duk-bok-gi): thick rice noodles with spicy sauce (a common street food) in a deep hot pot 9. 김치볶음밥(Kimchi bokum-bap): rice mixed with kimchi 10. 샤부샤부(Shaboo-shaboo): sliced meat and vegetables Other ‘Unique’ Foods Don’t be alarmed if you see people eating grasshoppers, live squid or bugs – this is part of what makes things different, not wrong! You can’t say you don’t like it unless you have tried it! When in Rome! Raw fish and a variety of seafood are also popular in Korea. Warning: if you decide to eat ‘live’ squid, be sure to eat it in small amounts and chew it thoroughly before you swallow. The ‘suckers’ can stick to your throat! Secondly, if you eat blow fish (a more expensive and tasty meal choice), be sure that it is at a reputable restaurant, with a reputable chef. There is poison in blow fish and restaurants hire professional chefs to take this out. It is delicious when you don’t have the fear of poisoning yourself! Western-Style Food ( in Korea) If you are a pickier eater or if you just need a taste from home, not to worry, as western food is available in Korea. In the larger cities, there are western restaurants like McDonalds, Dunkin Donuts, TGI Fridays, Bennigans, Outback Steakhouse, etc. Also, there are usually a few aisles in every grocery store (namely the larger ones) that have western food. Name brand peanut butter, jams, sauces, etc. will cost you a little more, but not too much and they might be worth the extra if you have a craving! There are also a few Costco stores in Korea – great for desired western foods like cheese. Tip: If you have room in your luggage, it is a good idea to bring some comfort good, such as your favorite cereals, spices, with you. Desserts are not very popular in Korea. Not to worry though, if you are a lover of sweets, you will be able to find some treats at local bakeries or corner stores – there are also plenty of 7/11’s in Korea that can satisfy your sweet tooth. If you are a fan of salty food, and a chip lover in particular, you may be surprised to find – in lieu of the traditional salt and vinegar or ketchup flavors – shrimp, squid, octopus and other delightful seafood flavor supplements! Korea offers some great pizza and sandwich (or ‘toast’) shops now too, which often cater to a western pallet. Be warned though, as some sandwiches will come with cabbage inside and pizza often includes corn and potato as standard toppings. Don’t be shy to ask for these ‘add-ons’ to be excluded from your order if you don’t want them…potato pizza is pretty delicious though! Being a Vegetarian in Korea It is a little bit difficult to be a vegetarian in Korea at least when you first get there. Once you have figured out what vegetarian Korean foods you like, things will be much easier (and tastier!) for you. Here are some standard vegetarian Korean dishes. Be sure to ask for no meat to ensure it isn’t added to the dish, which sometimes happens. 김치볶음밥(Kimchi bokum-bap): rice mixed with fried kimchi 떡볶기 (Dduk-bbok-gi): thick rice noodles with spicy sauce (a common street food) 된장찌개 (Dwen-jang jjiggae): tofu, potato soup 김치찌개 (Kim-chi jjiggae): kimchi soup 순두부 찌개 (Soon-doo-boo jjiggae): spicy tofu soup 비빔밥 (Bi-bim-bap) mixed rice with vegetables, egg and spicy sauce

https://www.travelandteachrecruiting.com/teaching-english-in-korea-

en

Many people experience acne breakouts in winter. Cold weather and indoor heating can cause the skin to become dry and irritated. Although there are steps you can take to prevent winter-related breakouts from occurring in the first place. Acne is caused by a combination of factors, including hormones, genetics, and lifestyle choices. In the winter months, when temperatures drop and humidity levels are low, skin tends to become drier, which can lead to an increase in acne breakouts. Several causes contribute to this condition, such as changes in hormone levels due to seasonal shifts, increased stress from holiday activities or preparations, an inadequate skincare routine resulting in clogged pores, dehydration leading to overproduction of sebum (oil), wearing heavy clothing or hats that trap sweat against your skin, and using harsh soaps or cleansers on your face, and so on. However, with some tips combined over time, hopefully, any potential bouts of winter-related breakout woes won’t be something to worry about. So let’s get started now, shall we? Acne Breakouts In Winter: Tips How To Prevent It from Occurring Use gentle cleansing products To help prevent acne breakouts in winter, you must take care of your skin properly with gentle cleansing products designed specifically for sensitive facial areas like the eyes and cheeks while avoiding overly abrasive scrubs, which may irritate delicate tissue further, leading to more irritation and inflammation. Drink sufficient water Furthermore, drinking plenty of water throughout the day keeps you hydrated from within, promoting healthy cell turnover rates and reducing the likelihood of pore blockages, which contribute to blemish flare-ups. Wash off makeup before bedtime No matter how tired you are, wash off any makeup before bedtime. Failing to remove your makeup at night can cause a buildup on the skin’s surface, which can lead to clogged pores and acne breakouts. This is especially true for heavy foundations or concealers, as these tend to contain more oil-based ingredients. Keep stress at bay. Stress plays a major role since high cortisol production induced by emotional turmoil triggers hormonal imbalances directly linked to pimple formation. Consider taking breaks from work or home life and engaging in some sort of activity. It will help relieve stress on the mind and body, reducing the likelihood of developing winter-related acne outbreaks. Use spot treatment Using products containing salicylic acid, such as toners or spot treatments, can help clear away dead cells that contribute to pimples forming on our faces during this season too. You can find several acne breakout creams on Amazon. Check the following: Acne Breakout Cream on Amazon 1. BRING GREEN Tea Tree Cica Soothing Cream Bring Green Tea Tree Cica Soothing Cream is a revolutionary skincare product that helps to soothe, balance, and control sebum on acne-prone and troubled skin. This unique cream is specifically formulated with natural ingredients such as tea tree oil, cica extract, aloe vera leaf juice, and panthenol to provide maximum soothing relief for those who suffer from irritated or inflamed skin. The lightweight texture of the cream makes it easy to apply without feeling greasy or heavy on the face. The Bring Green Tea Tree Cica Soothing Cream provides an excellent daily moisturizing solution for those with problematic skin conditions such as acne breakouts, redness, and dryness. It works by helping reduce inflammation while locking in moisture into the deeper layers of your dermis, which helps keep your complexion looking healthy all day long. With regular use, you will begin seeing results within weeks—making this an ideal choice if you’re looking for something gentle yet effective when it comes to taking care of problem-prone complexions! 2. Clean & Clear Advantage Acne Spot Treatment Gel Cream The Clean & Clear Advantage Acne Spot Treatment Gel Cream with 2% Salicylic Acid Acne Medication, Witch Hazel, and BHA, Oil-Free Gel Pimple Cream for Adults & Teens is an effective acne spot treatment that aids in the reduction of pimple appearance. This product contains salicylic acid and witch hazel, which are both known to help clear up blemishes. It also includes oil-free gel cream, which makes it gentle enough for adults and teens alike. The formula is designed to go deep into pores to attack the source of breakouts while preventing future ones from forming. By using this acne spot treatment regularly, you can expect your skin tone to become more even and any existing pimples to start fading away quickly due to its powerful ingredients, like salicylic acid and witch hazel, working together in tandem against them. Furthermore, it has been formulated without oils so that users don’t have to worry about clogging their pores further down the line either, making Clean &Clear’s offering a great choice. 3. Acne Treatment Differin Gel Acne Treatment: Differin Gel, 30-Day Supply, Retinoid Treatment for Face with 0.1% Adapalene is a gentle skin care product designed to help reduce and prevent acne breakouts. This gel contains the active ingredient adapalene, which helps to unclog pores and reduce inflammation associated with acne. The formula also includes moisturizing ingredients such as glycerin that help keep the skin hydrated while treating existing blemishes. Differin Gel can be used as part of an overall skincare routine for those who suffer from moderate or severe acne breakouts on their face or other areas of their body, like the chest or back. It works by targeting four key causes of acne: blocked pores, excess oil production, bacteria growth in follicles, and inflammation caused by these factors combined. When used consistently over several weeks or months, depending on individual needs and desired results, this retinoid treatment helps to clear up existing blemishes while preventing new ones from forming. Overall, Acne Treatment Differing Gel is a great option for anyone looking to treat mild-moderate cases of facial acne without resorting to harsh chemical treatments that could potentially cause further irritation if not properly monitored under professional supervision. The convenient 15-gram tube size makes it easy to store at home and is travel-friendly, allowing users to take it anywhere they go so they can maintain consistent use even when away from home, making sure that any progress made isn’t lost due to inconsistent application routines. Preventing acne outbreaks in winter requires extra care of our bodies both inside and out—drinking plenty of fluids helps maintain proper hydration levels while eating nutritious meals keeps our body nourished. Also, protecting ourselves from extreme temperatures through appropriate clothing also plays an important role in reducing the chances of having any type of breakout due to cold weather changes. Following these simple tips should ensure that we have a clear, glowing complexion throughout the season!

https://berrytips.org/acne-breakouts-in-winter/

en

The son of the former Governor of Ogun State and Chairman Kresta Laurel Limited, Otunba Gbenga Daniel, Adebola Daniel has begun a foundation to press for equity and fairness to the physically challenged individuals in Nigeria. In a statement, Mr. Adebola reiterated the need to end discrimination against people living with disabilities in the country. “I was born into a very comfortable home, with both amazing parents and without a disability. “However, when I turned 5, I was diagnosed with paraplegia- a rare condition with no medical clarity. I became confined to a wheelchair. Growing up in Nigeria, I unconsciously associated disability to poverty and crime due to amputated beggars on the streets mostly as a result of Sharia Law practiced in the North. This was general opinion of most Nigerians in my social circle as a child. “Having myself become physically challenged, I was exposed to the stigma and assumptions that came with being ‘disabled’. “All of a sudden, I was looked at with pity, with judgement and sometimes with resentment by my fellow countrymen. “As I became an adult, I began to realise that the onus was on me to make something of myself and create my life and future the way I envision it. My future was, and would always be in my own hands.” Debola, who has a Masters in Mechanical Engineering from University College London is an inspirational speaker with TEDx Talk and founder of the African Youth Initiative. According to him, Nigeria is one of the most unjust society for people living with disabilities, hence the need to create a movement to seek for not just equity but challenge the mindset of the average Nigerian. “I see a lack of integration and it saddens me knowing that there is a young disabled Nigerian out there that has the capability to achieve what I have achieved and even surpass me but regrettably, they were not being given the adequate support from government and the society. “It is unacceptable that most schools in Nigeria are inaccessible. It is unacceptable that roadside pavements are not fit for wheelchairs. It is unacceptable that Shell and other multinationals adhere to strict disability codes in the US and UK but are unable to carry this same principles to Nigeria.” He said. According to him, the Debola Daniel Foundation “will not be a charity organization that will give out wheelchairs and crutches to the less privileged, rather will challenge government to think of disabilities when formulating policies especially in Education, Employment, Entrepreneurism and Development. “At the moment, the foundation is working on a social media campaign with information, statistics and policies we support under the hashtag #DisabledNotUnable.” “A second segment titled #MyStory is being developed too, where the foundation celebrates disabled citizens who have decided that disability is not the end but just a different path. These people have decided to live life rather than be idle.” The statement read.

http://dailypost.ng/2016/08/26/gbenga-daniels-son-starts-foundation-disabled-

en

A Bible Study by Jack Kelley Note: Jack first posted this three-part study in 2006. He updated it in 2013 updated version. From about 1,000 to 900 BC Israel had been the most feared and admired nation on Earth. Then, following Solomon’s death and the civil war that ensued, the nation had fallen from its exalted position into a kingdom divided over idolatry. Israel’s enemies saw their chance and took it. First, the Northern Kingdom was conquered in 721BC by Assyria and then the Southern Kingdom was carried away into slavery 100 years later at the hands of the King of Babylon. Thus began The Times Of The Gentiles. Also known as Gentile Dominion, it will span over 2600 years from the Babylonian Captivity to the Millennial Kingdom as one gentile empire after another has had a hand at ruling the world, often subjugating Jerusalem in the process. Jesus said, “Jerusalem will be trampled on by the Gentiles until the times of the Gentiles are fulfilled” (Luke 21:24) and so it has been. Israel’s recapture of the entire City of Jerusalem in June of 1967 and the events of our time are signs that the end of Gentile Dominion is upon us, but I don’t think the Lord’s prophecy will be completely fulfilled until He comes back. In Rev. 11:2 we’re told the Gentiles will be trampling on the Holy City until the end of the Great Tribulation. Daniel 2 and Daniel 7 give us two different overviews of Gentile world government during this period, man’s and God’s. As you can imagine they’re substantially different. We’ll look at things from man’s perspective first. Our study opens in chapter 2 as Daniel, having been taken hostage to Babylon as a teenager and groomed to become an adviser to the King, finds himself fighting for his life. If he can’t interpret the King’s troubling dream, he and his friends will be brutally executed. There’s just one catch. The King won’t tell him what the dream was. Fortunately, there is One who will. Let’s look in. The king asked Daniel (also called Belteshazzar), “Are you able to tell me what I saw in my dream and interpret it?” Daniel replied, “No wise man, enchanter, magician or diviner can explain to the king the mystery he has asked about, but there is a God in heaven who reveals mysteries. He has shown King Nebuchadnezzar what will happen in days to come. Your dream and the visions that passed through your mind as you lay on your bed are these: (Daniel 2:26-28) Daniel had prayed that God would reveal the dream and its interpretation to him. Reasoning that God would not have brought him to a place of influence in the court of Israel’s conqueror just to be executed, he has committed himself to meeting the king’s impossible challenge and asked for God’s help. Now it’s show time. “As you were lying there, O king, your mind turned to things to come, and the revealer of mysteries showed you what is going to happen. As for me, this mystery has been revealed to me, not because I have greater wisdom than other living men, but so that you, O king, may know the interpretation and that you may understand what went through your mind. (Daniel 2:29-30) The King’s motives are revealed. He had refused to disclose the dream’s contents because he didn’t trust his advisers. Someone who can tell him both the dream and its interpretation will have proven himself both knowledgeable and trustworthy. “You looked, O king, and there before you stood a large statue—an enormous, dazzling statue, awesome in appearance. The head of the statue was made of pure gold, its chest and arms of silver, its belly and thighs of bronze, its legs of iron, its feet partly of iron and partly of baked clay. While you were watching, a rock was cut out, but not by human hands. It struck the statue on its feet of iron and clay and smashed them. Then the iron, the clay, the bronze, the silver and the gold were broken to pieces at the same time and became like chaff on a threshing floor in the summer. The wind swept them away without leaving a trace. But the rock that struck the statue became a huge mountain and filled the whole earth. (Daniel 3:31-35) I can imagine that the King was on the edge of his throne staring intently into Daniel’s eyes as he came to the realization that Daniel had just described his dream to the last detail. In fact, I’ll bet that Daniel had the entire court’s full attention, because one look at the King’s face told them all that he was saving their lives as well as his own. Now for the interpretation. “This was the dream, and now we will interpret it to the king. You, O king, are the king of kings. The God of heaven has given you dominion and power and might and glory; in your hands he has placed mankind and the beasts of the field and the birds of the air. Wherever they live, he has made you ruler over them all. You are that head of gold. (Daniel 2:36-38) Babylon was the country we know as Iraq today. Jeremiah, a contemporary of Daniel’s who wrote from Jerusalem, had told envoys from each of Israel’s neighbors that God was giving them two choices; surrender to the King of Babylon and live, or fight and die. God had chosen King Nebuchadnezzar to punish Israel’s enemies for their past treacheries at the same time that he brought the judgment God decreed against Israel because of their idolatry (Jeremiah 27:1-11). As a result, Babylon has wound up ruling the entire Middle East. But Daniel has just informed the King that any place on Earth that he desires will be given into his hands. Even the animals have been made subject to him. Nebuchadnezzar, representing Babylon, is the statue’s head of gold. “After you, another kingdom will rise, inferior to yours. Next, a third kingdom, one of bronze, will rule over the whole earth. Finally, there will be a fourth kingdom, strong as iron—for iron breaks and smashes everything—and as iron breaks things to pieces, so it will crush and break all the others. Just as you saw that the feet and toes were partly of baked clay and partly of iron, so this will be a divided kingdom; yet it will have some of the strength of iron in it, even as you saw iron mixed with clay. As the toes were partly iron and partly clay, so this kingdom will be partly strong and partly brittle. And just as you saw the iron mixed with baked clay, so the people will be a mixture and will not remain united, any more than iron mixes with clay. (Daniel 2:39-43) Knowing our history makes accurately interpreting this passage possible. Babylon was conquered by a coalition of the Medes (today’s Kurds) and the Persians (Iran) at the end of the seventy-year period set aside for Israel’s captivity. They’re the chest and arms of silver. The Greek armies under Alexander conquered Persia and are represented by the belly and thighs of bronze. The legs of iron are the Eastern and Western divisions of the Roman Empire that displaced the Greeks, and from this point on we’ve switched from history to prophecy. The Roman Empire was never really conquered, but collapsed under the weight of its own decay, transforming itself from a political entity to a religious one in the process. The Holy Roman Empire held sway over the known world well into the middle ages. Since then several of its components have had their time in the sun; Spain, England, and most recently England’s former colony, the USA. That leaves the 10 toes, a kingdom not yet in power, whose arrival on the world scene will be characterized by a coming together and splitting apart of groups uncomfortable with each other, as symbolized by the mixture of iron and clay. Remember, in Nebuchadnezzar’s dream the statue had two legs, pointing to the Roman Empire’s two divisions. The Eastern leg is currently represented by the Muslim countries of the Middle East, while the Western leg is called the European Union today. The nations of both legs are having problems that prevent them from uniting with each other. In the west the problems are financial, pitting richer countries against poorer ones, and the east they’re religious, with Sunni and Shiite Muslims at odds. Since each leg is having trouble, you can see why any attempt at unifying the two legs will be imperfect at best. The clay in the mixture refers to pottery made of the recycled shards or broken pieces of different kinds of pottery ground into dust again and mixed with water to make a clay like substance. When dried, it was very brittle and easily broken. In Nebuchadnezzar’s dream, it’s meant to dramatize the difficulty the end times Empire represented by the ten toes will have in staying together. “In the time of those kings, the God of heaven will set up a kingdom that will never be destroyed, nor will it be left to another people. It will crush all those kingdoms and bring them to an end, but it will itself endure forever. This is the meaning of the vision of the rock cut out of a mountain, but not by human hands—a rock that broke the iron, the bronze, the clay, the silver and the gold to pieces. “The great God has shown the king what will take place in the future. The dream is true and the interpretation is trustworthy.” (Daniel 2:44-45) During the time of the 10 toes, the Lord will bring His greatest and final judgment upon the Earth. Every last vestige of the Gentile kingdoms will be destroyed, and the Lord Himself will set up a kingdom that will never be destroyed. Nor will it ever fall into the hands of others. Then King Nebuchadnezzar fell prostrate before Daniel and paid him honor and ordered that an offering and incense be presented to him. The king said to Daniel, “Surely your God is the God of gods and the Lord of kings and a revealer of mysteries, for you were able to reveal this mystery.” Then the king placed Daniel in a high position and lavished many gifts on him. He made him ruler over the entire province of Babylon and placed him in charge of all its wise men. Moreover, at Daniel’s request the king appointed Shadrach, Meshach and Abednego administrators over the province of Babylon, while Daniel himself remained at the royal court. (Daniel 2:46-49) And so begins Daniel’s remarkable career as chief adviser to first the King of Babylon, and then the King of Persia. I said earlier that this vision represents man’s view of Gentile Dominion as a mixture of shiny and precious metals. While each metal is less valuable than its predecessor, indicating a decline in the quality of its rule, each one is also harder and therefore stronger, showing it to be more powerful than the kingdom it replaced. Next, we’ll look at these same four kingdoms from God’s perspective, and as I told you, it’ll be way different. Daniel’s Dream of Four Beasts In the first year of Belshazzar king of Babylon, Daniel had a dream, and visions passed through his mind as he was lying on his bed. He wrote down the substance of his dream. Daniel said: “In my vision at night I looked, and there before me were the four winds of heaven churning up the great sea. Four great beasts, each different from the others, came up out of the sea. (Daniel 7:1-3) The vision in Daniel 7 occurred 50 years after Daniel 2. Belshazzar was Nebuchadnezzar’s grandson, and Daniel was now an old man. The four winds of heaven symbolize a sovereign act of God, and the fact that these beasts come up from the sea hints that they represent the wickedness of Gentile Dominion. (Isaiah 57:20-21) “The first was like a lion, and it had the wings of an eagle. I watched until its wings were torn off and it was lifted from the ground so that it stood on two feet like a man, and the heart of a man was given to it. (Dan. 7:4) Babylon’s symbol was the winged lion. Being made into a man makes it represent the King. “And there before me was a second beast, which looked like a bear. It was raised up on one of its sides, and it had three ribs in its mouth between its teeth. It was told, ‘Get up and eat your fill of flesh!’ (Dan. 7:5) The bear symbolizes the Medo-Persian coalition. Though Media was the senior partner Persia became the stronger one, which is shown by one side being raised above the other. The three ribs are Persia’s three major conquests, Lydia in 546BC, Babylon in 539, and Egypt in 525. “After that, I looked, and there before me was another beast, one that looked like a leopard. And on its back it had four wings like those of a bird. This beast had four heads, and it was given authority to rule. (Dan. 7:6) The leopard is Greece. The four wings represent the speed with which Alexander conquered the known world. It took him only 10 years. The four heads are his four generals who took the kingdom upon Alexander’s death and divided it among themselves. “After that, in my vision at night I looked, and there before me was a fourth beast—terrifying and frightening and very powerful. It had large iron teeth; it crushed and devoured its victims and trampled underfoot whatever was left. It was different from all the former beasts, and it had ten horns. (Dan. 7:7) This beast is so strange and terrifying to Daniel that it didn’t look like anything he’s seen before. It’s iron teeth recall the legs of iron from Daniel 2:40. Rome was a powerful Empire that brooked no resistance. In the reference to the 10 horns, we again jump from history to prophecy, from the ancient Roman Empire to its revival in our times. “While I was thinking about the horns, there before me was another horn, a little one, which came up among them; and three of the first horns were uprooted before it. This horn had eyes like the eyes of a man and a mouth that spoke boastfully. (Dan. 7:8) Here’s the origin of one of the anti-Christ’s titles, the Little Horn. Notice that he’s not one of the original 10 horns, but comes from among them. A horn symbolizes power or authority when used symbolically. To me, this means that the anti-Christ doesn’t start out as part of the official leadership, but comes from a less significant status outside the centers of power to depose three of the existing leaders and assume their authority. If I’m correct, look for the anti-Christ to burst on the scene suddenly from a previously unimportant segment of the Empire rather than from among its current leaders. Daniel saw an angel in the vision who was also observing things. When he asked him about the fourth kingdom and the little horn, he was given this explanation: ‘The fourth beast is a fourth kingdom that will appear on earth. It will be different from all the other kingdoms and will devour the whole earth, trampling it down and crushing it. The ten horns are ten kings who will come from this kingdom. After them another king will arise, different from the earlier ones; he will subdue three kings. He will speak against the Most High and oppress his saints and try to change the set times and the laws. The saints will be handed over to him for a time, times and half a time. (Daniel 7:23-25) It’s obviously an End Times reference and includes the 3 ½ year duration of the Great Tribulation (time, times and half a time) during which the Little Horn will gain control of the entire world, taking over from the 10 kings. As Paul later confirmed he will exalt himself over everything that is called God or is worshiped. (2 Thes. 2:4). Revelation 13:7 tells us he’ll make war against Tribulation believers and overcome them. Revelation 17:13 says the ten kings will give their power and authority to him during the time of the Great Tribulation These clues all point us to the anti-Christ, who will be different from the other kings in that he will be indwelt by Satan himself. “As I looked, thrones were set in place, and the Ancient of Days took his seat. His clothing was as white as snow; the hair of his head was white like wool. His throne was flaming with fire, and its wheels were all ablaze. A river of fire was flowing, coming out from before him. Thousands upon thousands attended him; ten thousand times ten thousand stood before him. The court was seated, and the books were opened. (Dan. 7:9-10) But while the anti-Christ consolidates his power on Earth, a Greater Power is advancing His plan in Heaven. The phrase “Ancient of Days” is a title used of God that only appears in Daniel 7. The lines are being drawn for the climactic battle for Planet Earth. The “thousands upon thousands” attending Him likely represent the angelic host. Ten thousand was the biggest number they had in those days, so Daniel used that number multiplied by itself to describe a multitude no one can count, perhaps a reference to the raptured Church. John borrowed this illustration to describe the scene before the throne in Rev. 5:11. And notice the plural thrones. Daniel was having a peek at the End Times and saw a hint of the thrones of the 24 elders. None of the other Old Testament views of God’s Throne mention the additional thrones because they all occur in real time, and these thrones were not in view until Rev. 4. This little insight argues against the opinion of some theologians that the 24 thrones are occupied by an otherwise unidentified order of angels who assist God in governing the Universe. The fact that they don’t appear in Old Testament accounts, but do appear when the End of the Age is the context implies that another level of government has been added since the cross. It could only be the Church. In Ephesians 1:20 Paul said Christ has been raised from the dead and seated at the right hand of God, and in Ephesians 2:6 he said we’ve been raised up with Christ and seated with Him there, too. “Then I continued to watch because of the boastful words the horn was speaking. I kept looking until the beast was slain and its body destroyed and thrown into the blazing fire. (The other beasts had been stripped of their authority, but were allowed to live for a period of time.) (Daniel 7:11-12) Rev. 19:20 tells of the anti-Christ and false prophet being thrown into the lake of fire, and their armies being destroyed. Remember, in Daniel 7 the horn is the anti-Christ and the beasts represent empires. Babylon, Persia, and Greece no longer enjoy dominion over the world, but their modern counterparts are still around and will be destroyed during the Great Tribulation. “In my vision at night I looked, and there before me was one like a son of man, coming with the clouds of heaven. He approached the Ancient of Days and was led into his presence. He was given authority, glory and sovereign power; all peoples, nations and men of every language worshiped him. His dominion is an everlasting dominion that will not pass away, and his kingdom is one that will never be destroyed. (Daniel 7:13-14) And finally, the culmination of human history. Dominion over Planet Earth, which Adam lost to Satan, has been regained by the Son of God, never to be lost again. He’ll rule and reign with His Church forever. A period of history seen from man’s perspective as a beautiful statue of shiny and precious metals in Daniel 2 is described by God as it really is, a series of voracious beasts who oppress and devour mankind and oppose every effort by God to free us. You and I have come in on the tail end of this. We weren’t here to see it’s beginning like Daniel was, but because of his description, we’re better able to recognize our world for what it is and correctly identify the signs that tell us that the end is near. Next time, Chapters 8 and 9 and another model of the anti-Christ. See you then. 11-16-13

https://gracethrufaith.com/end-times-prophecy/the-end-times-according-

en

The United States military gets around. There are the countries with which it’s gone to war – Iraq, Germany, and Japan. There are countries it helps protect – Turkey, Poland, and Bahrain. And there are countries most people don’t even know that America sends troops to, like Thailand, Pakistan, and Antarctica. There are so many countries. In fact, there are only three countries in the world America hasn’t invaded or have never seen a U.S. military presence: Andorra, Bhutan, and Liechtenstein. American historian Christopher Kelly and British historian Stuart Laycock are the authors of “America Invades: How We’ve Invaded Or Been Militarily Involved With Almost Every Country on Earth.” They define “invasion” as “an armed attack or intervention in a country by American forces.” Americans have been invading other countries since before America was a thing, as early as 1741, when the North American battleground for the War of Austrian Succession was called King George’s War – one of the French and Indian Wars. That’s a lot of wars. According to Kelly and Laycock’s book, the United States has invaded or fought in 84 of the 193 countries recognized by the United Nations and has been militarily involved with 191 of 193 – a staggering 98 percent. The authors pose mixed, apolitical ideas. Without America’s worldwide military involvement, the U.S. would be smaller with less clout, and Mexico would be bigger, with more clout. American invasions checked the spread of totalitarianism in the 20th Century, and without such opposition, the spread could have been much worse. Finally, despite the image of an “imperial” United States, *only* America can meet some of the transnational challenges faced by the world in the 21st Century. Here are the only 3 countries America hasn’t invaded The tiny landlocked country of Andorra is a parliamentary democratic diarchy, run by two princes — which should be easy for Gen X-ers to remember. Andorra has no standing army. Instead, they have a militia ready to take arms if necessary. Since they are landlocked, they have no navy. Still, they were the longest combatant of World War I, technically remaining at war with Germany until 1958. Bhutan is also landlocked between two countries. Unlike Andorra, the countries surrounding Bhutan would probably roll over the tiny country in the event of a war. Bhutan’s 16,000-strong army is trained by the Indian army, and the country has no navy or air force. Bhutan is a constitutional monarchy with some Buddism sprinkled in – which meant the expulsion of 1/5th of its population of ethnic Nepali Hindus who would not conform. This little principality is locked between Austria and Switzerland. At just 62 square miles, one of the reasons America has never been here is that they might have trouble finding it on a map, just like two U.S. Marines famously did. They missed Liechtenstein and hit Germany instead. Liechtenstein doesn’t really need the help. They’re a constitutional monarchy with a democratically-elected legislature, low taxes, high employment, and a 100 percent literacy rate.

https://www.wearethemighty.com/popular/countries-america-hasnt-invaded/

en

It is very common in this part of the world to refer to every meat from almost every animal source as beef or just meat. This is not only common amongst the not-too-educated but also among the well-educated. The exceptions are just meats that are totally different; of course, nobody would refer to chicken, turkey, snail and pork as beef. The only distinction we seem to have gotten between meats that look alike in structure and appearance is that between beef and pork. These are the meats from cattle and pig respectively. They are the two we actually call their real names. It is hard to come across a person – even a stark illiterate, who would refer to pork as beef but when it comes to meats from goat, sheep and some other related animals, it is beef. Why am I writing article on names of Meat? I was on a queue at a restaurant waiting to make my order when the man standing in front of me started raising his voice. I listened and found out that he was arguing with the waitress over names of meats. The man already bought rice and plantain when this poor waitress asked what else the man wanted. “Put one meat”, the man replied. The waitress then asked him what kind of meat the man wanted to which the man replied, “What do you mean? Just put one meat”. I could see the frustration on the face of the waitress but she calmly replied, “…but sir, we have different types of meat, like beef, pork…”. The man interrupted by asking one hilarious question: “why would you put pork? Is pork meat? Pork is pork and there is cow meat and goat meat!” I had to add my voice to save the helpless waitress. This was when I thought I should write about this because others joined the argument and I found out that people only knew what the meats from cattle and pig are called – beef and pork. Special Names for the Meat of some Common Animals Here are the special names for the meat of some animals that we may know and not know. Animals | Meat Name | Cattle (cow or bull) | Beef | Calf (young cow) | Veal | Pig | Pork | Deer | Venison | Sheep (Ram or Ewe) | Mutton | Pigeon | Squab | Water Buffalo | Carabeef | Goat | Chevon | Chicken | Chicken | Turkey | Turkey | Now that you know better, you should try calling these animal meats by their real names and you will definitely get used to it. This list is not exhaustive and we welcome contribution in form of comments. If you think there is an animal meat we have missed here, you can share it with us using the comment section below. Waoh. I used 2 think Goat meat is muton too. Never knew its chevon. So pls what of snake meat? Duck meat? snail meat? and the rest Pls bacon is from what animal Bacon is from pig meat (pork). What is Dog meat called I know it is called Dog meat. Many of these things being asked don’t have special names because people speaking the languages we borrow don’t even eat them. Bt u can call dog meat 404 or J5. Forget about d botanical names, cheers Yea @ solo, that is how it is called in Akwa Ibom. OK o…thanks for the info. I need d names of d following meats. .snail, snake and bushmeat What of meats like Snakes,Monkey,dog cat and lizard? Iamjustcurious.com I am as curious as you are too but what I think is that we should call all these games with their meat – snake meat, monkey meat. You can tell us if you find the answers too. I just knew it! I thought every animal meat is just meat,thanks for giving a nice info. but i think arguing this thing emotionaly is not nessesary, isn’t it? Goat meat is either chevon or mutton Thanks for the enlightenment. thank u sooo much, u are so wonderful and ur posts are marvelous. quite dedicative, jazakumullah.Someone ordered for Bacon and egg not knowing its Dog = 404,406. Snake = anu agwo. Snail = crusta. Bat = Vampire…. Wait make i ask my grand pa, i’ll get bact to u’s….. After all meat na meat…….! Yes @solo it is also called INDIA CHICKEN or GUDUMEAT in EKITI. Try roasted dog meat in Ekiti and you will want more, Ire o. Wow keep it on. Amenligtened. Goat flesh is also called mutton but d formal name is chevon just learnt a thing There’s no such animal like chicken, they are called fowl. That’s their general name, the female in her and the male cook, the young is chick. The meat is called chicken. The chicken is a domesticated fowl, a subspecies of the red junglefowl. As one of the most common and widespread domestic animals, with a population of more than 24 billion in 2003 – Wikipedia, the Free online Encyclopedia. ARE DOGS AND CATS NOT MEAT I can’t jst laugh.. honestly.. u guyz r very funny I swear.. buh. Corocodile meat is what pls.. The meat from snake is. Called fish!

https://www.foodsng.com/every-animal-meat-is-not-beef-see-all-their-

en

DevOps Essential Tools for Success Robert Risch says DevOps has emerged as a game-changing approach to accelerate delivery, so improve collaboration, and enhance software quality. DevOps practices emphasize the integration of development and operations teams, with automation and tooling playing a pivotal role in achieving these goals. In this blog we will delve into the top DevOps tools that have revolutionized the way modern software is built, tested, deployed, and managed. Git, a distributed version control system, serves as the backbone of collaborative development. It allows developers to track changes, manage code repositories, and facilitate seamless teamwork across projects. Jenkins is a widely used open-source automation server that enables continuous integration and continuous delivery (CI/CD) pipelines. It automates the building, testing, and deployment of code, streamlining the development process. Ansible is a powerful configuration management tool that automates application deployment, infrastructure provisioning, and configuration tasks, reducing manual effort and ensuring consistency. Docker revolutionized containerization, allowing developers to package applications and their dependencies into lightweight, portable containers, ensuring consistent environments across different platforms. Kubernetes is a container orchestration platform that automates the deployment, scaling, and management of containerized applications, making it easier to handle complex container environments. Terraform is an infrastructure as code (IaC) tool that allows developers to define and provision infrastructure resources using a declarative configuration language. Prometheus is an open-source monitoring and alerting toolkit designed for cloud-native environments. It provides valuable insights into application performance and infrastructure health. Grafana complements Prometheus by offering feature-rich data visualization and analytics, helping teams make data-driven decisions and monitor critical metrics effectively. Puppet is a robust configuration management tool that automates repetitive tasks, ensures consistent system configurations, and enforces compliance across the infrastructure. Chef is another popular configuration management tool that enables automated infrastructure management and application deployment, promoting infrastructure as code principles. Selenium is a widely used testing framework for web applications, allowing developers to automate browser interactions and perform automated testing for various browsers. JUnit is a popular unit testing framework for Java applications, helping developers write and execute tests to ensure code reliability and maintainability. AWS CodeDeploy simplifies application deployment on AWS infrastructure, automating the process and ensuring zero downtime during updates. CircleCI is a cloud-based CI/CD platform that supports teams in automating build, test, and deployment workflows, seamlessly integrating with various version control systems. GitLab is a complete DevOps platform that integrates source code management, CI/CD, and collaboration features, offering an all-in-one solution for software development teams. SonarQube is a code quality management platform that performs continuous code inspection, identifying code issues, security vulnerabilities, and maintaining code quality. Slack is a popular team communication platform, facilitating seamless collaboration, file sharing, and integration.

http://robertrisch.com/robert-risch-exploring-top-devops-

en

The students who are moving abroad for higher studies have to adjust to the changing environment. The difficulties and hurdles can be rectified if the individuals believe in themselves and extract solutions accordingly. There are several challenges which the students have to face when they seek to adjust in a new environment or culture. When the individuals are aware of the problems and hurdles which shall arise with the passage of time, it becomes easy for them to cope with difficulties and adjusting. The biggest need is the need to keep an open mind, ask questions, interact, make new friends, overcome anxiety and frustration, find learning experience from the new environment and readjust when the individual seeks to return home. Keep an open mind Keeping an open mind is extremely important. The reason for this is that for adjusting to a new environment, the old likes and dislikes must be kept behind and new likes and dislikes need to be formed. Through this habit, the individuals can comfortably gel in and learn the norms and cultures of the people that are living around them. With an open mind, the individuals get a chance to feel and think like mindedly like the people around them and learn the culture which shall make them strong and established. Ask questions for developing an understanding The best method through which adaptability can be initiated is getting to know the people around you. This can be done by asking questions. The essential for developing an understanding revolves around understanding the mindset of the people around us. Getting to know new people and asking them questions is necessary for clarifying any sort of misunderstanding. The students who go abroad for studying need to understand this so that they can interact and learn in the right direction. All this is essential for the grooming of the individuals. Besides this, asking positive and healthy questions reflects confidence and mitigates the chances of misunderstanding. All this enables the individuals to extract the desired results and get acquainted to the varying cultures. Develop a similar sense of humor to gel in Sense of humor plays a vital role in generating the perception of an individual. The students who go abroad need to develop the stamina for taking and reacting to the humor of the people in a positive manner. The individuals who go abroad to study need to understand the sense of humor style and they must be aware of the jokes which make others laugh. All this is extremely important and rejuvenates the standard of image of the new immigrant. The students who feel like the strangers in the beginning start becoming familiar when they act and react like the residents of the same society. This enhances the chances of survival of the individuals. Adjust to the new culture and get involved in the similar likes Similar to the sense of humor, the individuals need to develop similar likes and dislikes with the people around them so that the problems which arise can be tackled accordingly. This adjusting factor of the individuals makes them look less like strangers. The students in most of the cases face difficulties in getting themselves acknowledged as peers and in all the instances appear as strangers. With the efforts of adapting to the similar habits, the individuals can at the same time gel in and derive a feeling that they belong to the similar environment. Liza Ryan is a photo of a genuine expert and a business move on from a legitimate college who has cut her own particular streets towards achievement. She has examined the challenges which the understudies face when they move to another country for higher studies. She is working with buy essay as an essayist and working for extricating answers for the understudies. You can also follow her on Facebook | Twitter.

https://studyabroad365.com/how-to-

en

As onlookers have watched internet usage in Africa take an almighty leap in recent years, the continent’s startup ecosystem has exploded, allowing countless entrepreneurs to come into their own. With over 100 AfriLab tech hubs across the continent, tech innovation is now considered to be one of the region’s most booming industries. Dubbed the year of “technology revolution” by National Geographic, 2017 marked the beginning of a generation of young tech geniuses teaching themselves to code and develop on their own personal devices. One of these young masterminds is 19-year-old tech prodigy Elvis Chidera from Nigeria, who learnt his coding skills on a Nokia 2690. After working as an engineer for MIT-backed startup dot Learn, he founded his own exam preparation app Prepup and currently works with the ride-sharing platform Careem. Although backing for its entrepreneurs is significantly less noticeable than across the rest of the continent, Portuguese-speaking Africa is also setting a precedent in innovation with the development of accelerators, incubators and entrepreneur networks across the likes of Mozambique, Angola, Cape Verde and Guinea Bissau. Although thriving more than it has ever done before, Africa’s startup ecosystem differs largely from that of leaders in Europe, Asia and the United States. Due to its developing economy and wide-scale corruption, investment from abroad is often hard to get hold of. However, thanks to the second round of global acceleration programmes such as Google Launchpad Africa, as well as events such as the Africa Early Stage Investor Summit, startups are now experiencing unprecedented levels of success. What’s more, if 2018 has been dubbed the year of the rise of disruptive technologies, 2019 is predicted to be even bigger for the continent’s startups. After a year of tech innovation taking place on a relatively small, local scale, next year African startups are predicted to settle and begin to disrupt other areas of information technology. According to the managing director of HP South Africa, David Rozzio, the four areas set to be affected are the workplace, manufacturing, sustainability and sustainability. With around 360 million smartphone users expected on the continent by 2025, the speed at which tech innovation in Africa continues to grow is unpredictable. However, what’s certain is that the continent’s startups are beginning to make themselves heard on a global scale, meaning a lot could be about to change for the African economy.

https://startupbeat.com/could-africas-startups-be-the-ones-to-watch-

en

Personal hygiene is something some people do not take serious but it is an issue that can have negative impact on you. Body or mouth odour do not just start in a day, it is something that develops over a period of time because of the personal hygiene that you practice. The reason why you need to practice personal hygiene is because it can solve issues you have that were caused by bad personal hygiene practices and it can also help prevent having such issues. So if you are having body odour or mouth odour, what you need to do is practice basic personal hygiene and it will be gone. These are some of the basic personal hygiene you can practice so as to maintain your body and keep yourself clean. Take your bath This is something we all know and do but I will be taking it a step further by advising you to shower after doing exercises that might have caused you to sweat. You can also ensure you take your bath at morning and at night if you are a working class type. Brush your teeth It is important you brush your teeth daily so as to avoid mouth odour. You are likely to have mouth odour if you do not brush your teeth daily. My advice is that you brush your teeth twice a day or brush in the morning and anytime you eat a food with a strong smell. You can also use mouth wash if you are the type that’s always on the road, which means you can brush once a day and use mouth wash later on during the day. The use of deodorant helps prevents having body odour, I understand that a deodorant might not smell nice like a perfume but it sure smells nice and help prevent body odour. You can use a roll-on or body spray as deodorant, this will definitely work as it has been tested and found working. Trim your nails You might be tempted to leave your nails untrimmed or untreated because of the daily hustle but if you really look it will take you less than five minutes to trim your nails. You might think it’s not important but it can cost you good deals as some people cannot condone dealing with people that do no trim their nails. Shave your face Shaving your face should be something that should be done weekly especially your beards. Leaving your beards unshaved makes you look unkempt, so it’s something you should avoid at all cost. You can shave your head also depending on the type of hairstyle you keep. Wash your clothes after use I’m not a fan of people wearing their clothes more than once before washing, I believe you should try as much as you can wash your clothes after wearing it once, I know it’s not easy but it’s a habit you should try to cultivate. Take care of your clothing Taking care of your clothing means making your clothes look good and presentable. It is not enough for you to wash your clothes; you also need to iron them so that they can look smooth. Nobody takes someone wearing a rumpled cloth serious. Wash your hands You might be wondering why washing your hands is on the list but I can tell you that it is important because you can get yourselves and other infected with a dirty hand. A lot of people just buy snacks on the road and use their hands to eat not minding if their hands are dirty or not. You might want to argue the fact that you can’t wash your hands with soap while on the road but you can use hand sanitizer instead as it kills the germs in your hands. Wash your underwear Some people feel comfortable wearing dirty underwear because nobody is seeing their underwear but what they don’t know is that they are only harming themselves as wearing dirty underwear can cause diseases. Cover your mouth and nose when sneezing Covering your mouth and nose while sneezing or coughing is also important because it makes people feel more comfortable around you but when you don’t cover your nose and mouth when coughing you will only make people around you feel uncomfortable. Keep a handkerchief with you always It is important you always hold a handkerchief with you because you with need to clean your face when sweating. You can also use your handkerchief to clean your nose and also use it to blow mucus out of your nose. You should make sure that you always keep a handkerchief with you especially when you are going out. Use appropriate makeup When I say use appropriate makeup, I’m not referring to ladies only. It is not a good for someone not to use basic makeup such as cream, hand cream and hair cream. It is not also good when you over use your make up, so my advice is that you use make up but use it appropriately. As you begin to practice this basic hygiene, you will begin to appreciate yourself the more and also be at your best. Two things I want every individual to achieve is being the best they can be and being happy with themselves.

https://successpoint.com.ng/basic-personal-hygiene-you-should-

en

About one-in-four tablet owners, 39%, use their tablet daily for social networking on sites like Facebook and Twitter. And 56% do so at least weekly-the same percentage that play games on their tablet at least once week. These are not exact comparisons to social networking habits on other devices, but a 2010 survey by the Pew Research Center found that 65% of all online adults said that they were social network users and 29% of adults with cell phones who reported using SNS on their phones. When it comes to news consumption on the tablet, the social networking component-at least electronically-is still evolving. A portion of users, 16%, share news through email or social networking regularly, the same percentage who watch news videos. Another quarter share news this way at least sometimes. But 41% say they have never shared news stories electronically. When a select group of tablet news users was asked about their tablet activity in the last seven days, the numbers grew somewhat: 39% reported sharing headlines through social networking sites, and 38% said they shared longer articles. In January 2010, 52% of all adults who got news online said they forwarded links to news stories or blogs via email, social news networks or Twitter. Even more, get their own news this way. Fully 75% of adults who got news online reported having news forwarded to them through email or posts on SNS. The youngest age group, 18-to 29-year-olds, are the most likely to do social networking on the tablet, though young adults are no more likely to share news. Six-in-ten 18-29 year olds access social networks daily on their tablet, but they really are no more likely than other tablet news users to share news stories regularly through their tablet device (19% of 18-to-29-year-olds, 17% of 30-to-49-year-olds and 15% of 50-to-64-year-olds). The app power user is no more likely than the browser user to share news through email or social networking. The one group that seems more prone than others to share news via email or SNS is non-white individuals. About a quarter of this demographic group share news stories, while that is the case for just 14% of non-Hispanic whites. Overall though, social networking is just not, at least not yet, a major part of getting news on these devices.

https://www.pewresearch.org/social-

en

Participate in these ongoing scholarships in Nigeria. There are over 71 ongoing scholarships in Nigeria as of now and were have carefully penned them here for you to go through and make your decision. Only 20% percent of public school students in Nigeria received a full-ride scholarship. Given the long odds, it may appear that applying for financial aid is pointless. Scholarships, on the other hand, provide numerous advantages that make applying well worth your effort. We understand that applying for college is a stressful process, and applying for scholarships may seem like an extra burden you don’t need. You can set yourself up for life if you can persuade a college scholarship if you’re the appropriate candidate for a scholarship, full-ride or not. Read also: 10 Best Medical Schools in Nigeria What is the definition of a scholarship in Nigeria? A scholarship in Nigeria can be a gift or payment given to a student to help them pay for their education. It is given to them based on their academic or other achievements. A scholarship in Nigeria is a financial aid given to a student for education, based on academic accomplishment or other factors that may include financial need. The Nigeria scholarship’s goal A Nigerian scholarship, on the other hand, is unrestricted funding that allows you to pursue your goals. It helps you achieve your academic and career goals by lowering the financial barrier. Getting a Nigeria scholarship can take care of all of your financial worries. The top five reasons why you can’t afford to not apply for these ongoing scholarships in Nigeria listed below. When the (Nigeria) economy is in shambles, and your parents are unable to pay their bills. Well, hopefully, that isn’t entirely true, but it does include some truth. While parents still value paying for their children’s college education, the amount that they can afford has decreased. According to a comparable poll performed by Longmire and Company, a higher-education consulting firm, 33 percent of parents indicated they planned to contribute less than $5,000 to their child’s college tuition, which is barely enough to cover four years of textbooks. 1. The expense of living in Nigerian colleges is rising. Unless you plan on living at home and commuting to school, which is a great choice for a lot of Nigerian college students, but, expect to pay a lot more for your housing, food, books, and supplies than your elder brother or sister did. All of these items have become costlier. This is the number one reason you should apply for these ongoing scholarships in Nigeria. 2. Nigerian schools are much more expensive today than it was previously. Since 2010, a public Nigeria four-year tuition and fees have raised by more than 10% annually over inflation, according to the College Board’s Trends in College Pricing study 2010. In addition, tuition at public two-year institutions and private four-year colleges rose by 5% above inflation. This is another reason you should apply for these ongoing scholarships in Nigeria. 3. There are a lot of people that owe a lot of money. A quarter of the population of Nigerians, or 60 million people, owe $500 billion in student loan debt. Doesn’t that seem like a lot? Yes, it is. The average Nigerian college graduate has $30,000 in student debt by the time they graduate, according to the Institute for College Access and Success, and that number is certain to rise. According to experts, this could be the next financial bubble to explode. This is the third reason you should apply for these ongoing scholarships in Nigeria. 4. Scholarships Make It Easier to Get an Education In Nigeria, the tertiary institution is expensive: the average student debt for the 2018 graduating class is $30,000. This is another strong reason why should consider these ongoing scholarships in Nigeria. Access to higher education can feel difficult if you’re a brilliant student from a low-income family. One of the most essential responses to the question “why are scholarships necessary?” 5. No one’s education should be hampered because of a family’s financial situation. One of the most important societal benefits of scholarships is that they provide us with engineers, doctors, academics, nurses, lawyers, and scientists from backgrounds where standard college financial help would be difficult to come by. It is better for us as a society to have more people in these occupations. It’s good you consider these ongoing scholarships in Nigeria. 6. The student support from the Nigerian government has significantly dropped. Even though it appears that Nigeria has weathered the worst of the crisis, many states are still struggling from the downturn, and most have made significant cuts to public sector funding, including higher education. As a result, tuition at Nigerian public colleges and universities has risen, which means you’ll be paying more now. Thank God for these organizations championing these ongoing scholarships in Nigeria. 7. Nigeria scholarships winners have access to a wealth of resources. In Nigeria, you get more than a healthy financial account when you get a scholarship. Many Nigerian institutions assist students who have been awarded scholarships to help them get the most out of their funds. Don’t worry, this doesn’t imply your college will micromanage your expenditures and prevent you from having fun. This entails that they will offer guidance to help you make the most of your scholarship by assisting you with the study. This additional assistance can be very valuable to any student since it means that the institution will be there for you every step of the way to ensure that you achieve the best potential results. Scholarships incentivize philanthropy. It is intended that if you get a scholarship, your outlook on life would alter. If this donation has aided you, you may decide to become more generous yourself. Perhaps you’ll go on to start another scholarship or make charitable contributions to the college. Nigeria Scholarships Give You More College Options This is another valid reason you should give these ongoing scholarships in Nigeria a taught. Even if you are not from a low-income family, you may be denied admission to various universities if you do not receive a scholarship. If you self-fund your way through Ivy League universities, for example, you could end up with six figures in debt. You may be expected to do volunteer work in your sector depending on who awarded your scholarship. This is far from a burden: it will give you vital real-world experience that will improve your curriculum vitae and help you succeed in your profession. You should look for volunteer work to go along with your scholarship, even if it isn’t required. This kind of industry knowledge is priceless. This is another reason why you should consider these ongoing scholarships in Nigeria. We began this article by asking, “Why are scholarships important?” We hope we’ve shown why you should apply for scholarships: they provide a wide range of benefits and can help you make the most of your academic experience and post-graduation life. 71 Ongoing Scholarships in Nigeria 2022 – 2024 include: - Scholarships from the Federal Government for Undergraduates, HNDs, NCEs, and Postgraduates in 2024-2025 click fsbn.com.ng to apply. - NNPC-ADDAX Scholarships for Nigerian Undergraduates in 2024 - Undergraduate Scholarships for Nigerian Agip Oil Company (NAOC) in 2024 - Scholarships for Shell Undergraduates in Nigeria in 2024 - Nigerian Graduates and Undergraduates Jim Ovia Scholarship 2024 - SEPLAT/NPDC Undergraduate Scholarships 2024 - LNG scholarship for Undergraduates in Nigeria - AGIP Postgraduate Scholarship for the Year 2024 - Nigerian Fulbright Scholarship Program 2025-2025 - MTN Foundation Undergraduate Scholarships for Nigerian Students 2024, check https://foundation.mtnonline.com - SEOF Scholarships for High School, Undergraduate, and Postgraduate Students - Undergraduate Female Students Scholarship 2024. - Scholarship & Internship for Undergraduates at APM Terminals 2024 - Guinness Nigeria Undergraduate Scholarship Scheme for Young Nigerians - Application for the Gani Fawehinmi Scholarship in 2024 - Scholarships for African Students from the David Oyedepo Foundation, 2024 - Postgraduate Scholarship from the PTDF - NITDA Scholarship Program for Nigerians - 2022 BEA Awards for Nigerians Studying Abroad - Nigeria Emergency Student Funds - Nigeria Erasmus Mundus Scholarships 2024. - The KPMG University Scholarship Program in Nigeria. - National University Scholarship from NNPC/SNEPCo. - Postgraduate Scholarships from the NITDA. - Graduate Accelerated Program at Oando. - Undergraduate Scholarships from the NNPC/Eroton Joint Venture. - Acumen West Africa Emerging Leaders Fellowship - Awards from the African Economic Research Consortium - Scholarships for the Africa Initiative for Governance - Africa Nursing Scholarship. - Angus Sawise Women’s Scholarships - AYADA Lab Program for Entrepreneurs in West Africa - Fellowships for Nigerian women in cyberspace - Scholarships for Social Workers in Higher Education - Education USA’s Opportunity Funds Program for Nigerian Students - Esso International Postgraduate Scholarships – Nigeria - Esso National Postgraduate Scholarship Awards – Nigeria - Female Reporters Leadership Fellowship for Female Nigerian Journalists - Full Total Masters Scholarships for Nigerians to Study in France - Google Scholarships Europe Middle East and Africa - Sterling Alternative Finance (SAF) Graduate Trainee Program 2024 for Nigerian Graduates. - Harry Frank Guggenheim Foundation Grants - iLEAD Fellowships for Nigerians - Internships in Nigeria for Nigerians (Paid Industrial Attachments for Undergraduate & Postgraduate Students) - Harry Frank Guggenheim Foundation Grants - KPMG Nigeria University Scholarships - LLM Scholarships for Nigerians - Masters in Public Health Scholarships – University of Manchester - Graduate Internship Engineering Scholarship by Exxonmobil - Dynamics 365 Sales internship in Lagos Scholarship by Microsoft 2024/2025 - Mobil National Undergraduate Scholarship Awards – NigeriaMTN Muson Music Scholarships - Murtala Muhammed Scholarship for Nigerians - Nigerian Conservation Foundation Research Grants for Nigerians - Nigerian Women Association of Georgia Scholarship - NLNG Scholarships for Nigerians - Petroleum Technology Development Fund Scholarship Programme - Ph.D. Scholarships for West African Students - Shell Nigeria Secondary School Scholarship Scheme - Graduate Internship (Medical Sciences) Scholarship by Exxonmobil 2024/2025 - Stanbic Undergraduate Scholarships for Nigerians - TRECC Africa Scholarships for Africans - The Oxford Nigeria Scholarship in African Studies - Rotary Foundation Global Grants - Griffith Scholarships for African Nationals - Swiss Government Excellence Scholarships for Nigerian Students - Newcastle University Nigeria Scholarships - Fulbright Foreign Student Program - Startup Nigeria Incubation Program 2024 | ONGOING - Nigeria LNG (NLNG) Scholarship Scheme - Olusegun Agagu Foundation 2024-2025 Full Scholarships Scheme-Nigeria. - Enugu State 2020 Scholarship Programme for Enugu Undergraduate Students The above is the 2024-2025 updated 71 ongoing scholarships in Nigeria. Do you have any comments, questions, or further thoughts on why scholarships are vital for university applications? When should you apply for a college scholarship? Please let us know in the comments section below, and thank you for reading! Trust you found our article on 70 Ongoing Scholarships in Nigeria 2024-2025 [Apply Now] helpful. Follow our website for more informative articles.

https://scholarshipshall.com/ongoing-scholarships-in-nigeria/

en

Home-based businesses are in great demand; if you come across a skill that can make you a source of income while staying at home, nothing can be better. Sublimation printing is a fun learning skill and can become an ideal home-based business that allows you to create demanding prints on different blanks for your customer. Rather, at various festivals, you can present your customized sublimated items as gifts to your loved ones. Getting started with the sublimation printing business, some basic things needed to start sublimation. The types of equipment mentioned here are from Reliable sources, and you can choose the best things to suit your work requirements. This detailed post will comprehensively introduce every piece of equipment required to start a sublimation business. Before approaching equipment details, let me introduce sublimation printing and how it works. What is Sublimation Printing, and how does it work? Sublimation is a process that refers to a physical change of form from a solid to a gas state without developing liquid. Using a Heat press machine, Heat, and pressure are applied to print the desired designs on various substrates, such as mugs, Tumblers, glass, garments, and phone cases. One of my articles elaborated on what is sublimation printing here, You will find thorough information on sublimation to help you understand the whole process. What can you sublimate on? Sublimation is a simple skill we can learn and make a living from while having fun. It can be done on multiple sublimation quoted blanks like T-shirts, Tumblers, Glass, Mugs, Polyester Mouse Mats, aluminium, Ceramic tiles, and many more. Just spending a little amount, you can start a home-based business right from the comfort of your home. Things Needed to Start Sublimation - Sublimation Printer - Sublimation Paper - Sublimation Ink - Heat Press Machine - Sublimation Blanks - Computer and Design Software - Heat resistant Tape - Butcher Paper - Heat Resistant Gloves - Sublimation Spary - Other Tools and Accessories The main equipment in the sublimation material list is a sublimation printer. Regular inkjet printers cannot do sublimation; only sublimation printers that use micro piezo printing technology convert the sublimation ink from solid to gas form without liquefying and are very strongly adsorbed to the surface of an object. As a result, there is a vibrant and long-lasting print on top of the blank. When choosing a sublimation printer, ensure it has excellent colour reproduction, high resolution, and compatibility with sublimation inks. Sublimation printer costs can start from $150 to $1000, but choosing and finding the best sublimation printer for your business depends on you. For brilliant prints output I will recommend these sublimation printers and their best use for specific blanks Epson Expression Photo HD-XP 15000 Best for occasional use EPSON ECOTANK ET-15000 Sublimation Printer for Heat Transfer Epson Workforce WF-7710 A sublimation printer is best for sublimating mugs. You can jump to these Buyer Guides for detailed information and choose the most suitable printers for your printing needs. Sublimation inks are special dye-based inks designed for sublimation printing. The inks come in four colour cartridges CMYK Cyan, Magenta, Yellow, and Black. These Inks print colourful, vibrant images with sublimation printers; you transfer these designs on many sublimation-friendly blanks. Any ordinary ink can not be used in the sublimation printer. Using sublimation inks compatible with your printer model is important for optimal results. Why did I choose them? Because of their brilliant and sharp color accuracy, the result ultimately gives us Bright and life-like prints. Please visit this post on the topic of the best sublimation inks. Sublimation paper acts like transfer paper, first holding the ink and then release when the heat transfer process begins. It’s a medium to transfer the design from the sublimation printer to the substrate. Look for high-quality sublimation paper with excellent colour retention, fast drying, and minimal bleeding. I suggest A SUB Sublimation Paper and Printers Jack Sublimation Paper. because of their ability to produce exceptional image quality and vibrant colors. When using these sublimation papers for sublimation it enables the ink to penetrate the fibers of the material. resulting in stunning and lifelike reproductions of images. For more detailed information read this post on the Best sublimation paper. Heat Press Machine It is also a necessary item for sublimation printing. It applies Heat and pressure to the sublimation paper and substrate, allowing the ink to transfer seamlessly. When selecting a heat press machine, consider its size, temperature control capabilities, and Heat and pressure distribution. You can consider Slendor 5 in 1 heat press machine. It comes with different attachments and can be used for multi-purpose like T-shirts, Mugs, hats, plates, and caps sublimation. These attachments are connected with this heat press according to your sublimation need. If you want to sublimate a mug, you will have to connect the mug press attachment with the press, so you will do the same by connecting different attachments and sublimating other blanks. You can get this heat press for $176. However, Prices may fluctuate over time Mug press and Tumbler Press Machine Mug press and tumbler press can also be purchased separately. Many brands allow us to buy a heat press machine to sublimate mugs and tumblers if you want to start a mugs and tumbler printing business. My experience with EENOUR Mug and Tumbler press machine. This machine works well with 16 oz, 20 oz, and 30 oz skinny tumblers. 11oz to 16 oz ceramic and coffee mugs can be sublimated quickly. If you are planning for a home-based business, spending $299 in one go can benefit you in the long run. Sublimation blanks are different items onto which you can transfer your designs. These can include garments like t-shirts, hoodies, and caps, as well as mugs, keychains, phone cases, and more. You can sublimate only on sublimation-coated blanks but not on any ordinary items. My comprehensive blog post on best sublimation blanks. Go there and grab the information. You’ll need a computer or laptop with design software to create and edit your designs. Popular design software options include Adobe Photoshop, CorelDRAW, and PROCREATE. You can edit and create images online on Canva and other programs to complete your sublimation tasks. Familiarize yourself with these programs to unleash creativity and produce stunning sublimation prints. This post will enable you to learn how to use all the different design tools. How to Make Sublimation Designs on Different Applications. Other Related Accessories Miscellaneous accessories can enhance your sublimation printing experience in addition to the core equipment. These may include heat-resistant tape, spray for sublimation, lint rollers, and heat-resistant pads. You can achieve precise and professional results while ensuring the longevity of your equipment with these tools. Time And Temperature For Different Sublimation Blanks Sublimation Blank | Estimated Time | Estimated Temperature | Ceramic Mug | 2-4 minutes | 360°F (182°C) | Polyester T-Shirt | 45-60 seconds | 380-400°F (193°C-199°C) | Aluminum Photo Panel | 60-90 seconds | 385-400°F (204°C) | Mouse Pad | 45-60 seconds | 390°F (199°C) | Ceramic Tiles | 5-6 minutes | 400°F (204°C) | Phone Case | 60-70 seconds | 375°F (191°C) | Puzzle | 60-90 seconds | 400°F (204°C) | Keychain | 45-60 seconds | 375°F (191°C) | Picking up the right pieces of equipment when you start a sublimation printing business journey is essential, and choosing the right items at the beginner’s level can save you a lot of future hassles and financial woes. I tried to educate you on how to start a successful sublimation business and gave you sublimation business ideas. It is up to you to learn this skill, take it gracefully, and grow your business. Good Luck! How do I start sublimation at home? Create your favorite design using design software, and take print in a sublimation printer. To transfer this image to the desired blank, apply heat and pressure with a heat press machine for a specific time and temperature. Your sublimated blank is ready to use. How much does it cost to start a sublimation business? Starting a home business will cost around $1500 to $1800, which may be low. All production material costs will be added. Do I need a computer for sublimation? Yes, you will need a Computer or a laptop where you will create the design using design software. Buying a costly PC or laptop is unnecessary because you have to run software that runs smoothly without any interruptions. Can I sublimate with any printer? No, you can not sublimate with any ordinary printer but need a special sublimation printer or a converted inkjet printer into sublimation. You must know how to convert an inkjet printer into a sublimation printer. What’s the best material for sublimation? Polyester, nylon, spandex and all poly-coated materials are considered the best blanks for sublimation because the result is very durable and long-lasting. Is sublimation long-lasting? The best thing about sublimation printing is that it is considered durable because the sublimation ink not only sits fronted on the object’s surface but is absorbed permanently into the object’s fibres and printed very well, which lasts for a long time.

https://techrayss.com/things-needed-to-start-sublimation/

en

The holiday is officially over, and it’s the start of a new school year. I guess you are also thinking about how to prepare your kids for resumption in school. Preparing kids for school resumption can be a complicated process…just as most transition processes are. Both you and your kids have a lot of work to do to make it go smoothly. If your child is just starting school, you may feel even more anxiety than the child. If it is now a normal process, then you may not feel as anxious. However, children, no matter their age, always feel anxious on their resumption day. For a smooth transition, there are some things you need to do to help both you and your kids get prepared for school. Tips on Preparing Your Kids for Resumption The tips below are helpful for both day students and boarders. Of course, some points are more for day students than boarders and vice versa. However, they are all helpful, and you should consider them. 1. Start a Routine for Your Child: Routine is essential for children. Most children don’t follow routines during the holidays because they don’t usually have anywhere to be. Routine brings about structure and helps them to be more organised. A week or two before resumption, become strict on bed routine, mealtime, etc. 2. Stock Up On School Materials: This is the time to prepare for the whole trimester or semester. Stock according to the age or level of your child. A kindergartener will need crayons, coloured pencils, colouring books, etc. An older child may need math sets, notebooks, pens, etc. Socks, handkerchiefs and underwear are also essential items your child will always need. 3. Read With Your Children: You need to start reading with your kids to help put them in study mode. This is also the period that you revise their last term’s work with them. This will also help you know the parts they may be struggling with and how you can help as the term progresses. 8 Fun Activities to Do with Your Children During the Holidays 4. Plan School Meals: If your children still carry lunch to school, this is the time to plan their lunch packs. Knowing what your child will eat in a day makes it easier to plan. Create a meal table and stick with it. To make this process even more enjoyable, let your child or children join you in making the table. 5. Prepare School Outfits: Join your child in selecting outfits for school. A week before resumption, you can select outfits for the first week of school and after that, always choose clothes a day before school. This will help your child be more prepared for school each day and it will save more time. If your child’s school has a uniform, ensure that your child has an extra (or two) pair. At all times, let one pair of uniforms be ready to wear. For children in kindergarten, some schools expect that you pack an extra outfit for your kid. This is very advisable because one can never go wrong with an extra outfit for children. 6. Back to School Shopping: Before school resumes, take your child shopping with you for school bags, lunch boxes, shoes, hair ties, or whatever they may need for school. Read the next: 25 Superb Ways to Save Money for Moms on a Budget 7. Talk to Them about Safety: No age is too young for the safety talk. Teach your child to be security conscious. Remind them not to follow any stranger or go through lonely paths. Teach them to also regularly change their route (for those not using the school bus). For children who go to and fro school themselves, teach them about road safety. This is the time to practice the route they’ll be taking with them. A week or two before resumption, show them how to get to the bus stop or get to school. 8. Teach Them Independence: The moment you decide for your child to go to school, you’ve indirectly decided for them to become independent. Children start becoming independent from a very young age. But it’s your duty as a parent to show them and teach them more about independence. Show them how to arrange their books, how to be careful with their school materials, how to pack their lunch box, etc. You’ll love this article: 8 important life lessons every Mom must teach their children 9. Reduce TV Time: As school starts, you need to reduce their free time and engage them more in helping around the house or reading. This is so that when school starts, they don’t find it challenging to adapt to the change in schedule. 10. Makeout Time for Family: It is easy to be carried away by school preparation that you forget to be a family and enjoy regular evenings. But be careful not to blur the line between school and family… Just the same way, you are careful not to blur the line between work and family time. This is also the period when you spend more time with your kids because there won’t be a lot of opportunities for outings between school and work. This is especially important for children in boarding school that will go on for weeks without seeing their parents. Spend quality time with them. It may seem challenging to start preparing for school. But it’s even more challenging for the school to resume without a plan in place. Start early to plan for the term. Always endeavour to include your children in the process. This will make them excited for school and will make them feel involved too. Another good thing to do is to have a back-to-school ritual. It could be that you take them somewhere lovely the day before school resumes, or you give them a wrapped gift on resumption day just before they leave for school. Help your child ease into school mode! Remember that motherhood is a journey made easy when we have the right people in our corner. 🧡 So, click this link to go to the amazing world of motherhood http://bit.ly/AMumandMoreFBFamily Or send me an email to join our Exclusive WhatsApp Family. Keep being #fabulous 💋 Rooting for you. This is so detailed and helpful. Thanks mama. You are welcome. Thanks for the compliment. Thanks momma. This is really helpful. God bless you

https://amumandmore.com/prepare-kids-for-school-resumption/

en

Ever wonder why some days your hair won't do what you want it to? Most of the time, these days happen right before something important. There are days when you just want to rip your hair out, fix it, and put it back on. It could be because your scalp is too greasy or the texture is just off. We can't do that, but we can give you another easy tip that works like magic on your hair. Let us tell you about a popular way to wash your hair called "reverse hair washing." What Is Reverse Hair Washing? Reverse hair washing is a method that has become popular recently. It involves conditioning your hair first and then washing it with mild shampoo. This way of washing your hair is easier on your hair and often makes your hair healthier by making it grow faster and feel softer. It also gives the hair shine, bounce, and body. How Does Reverse Hair Washing Work? Conditioners are an important part of any hair care routine because they nourish and hydrate the hair while also helping seal moisture. Conditioner coats the hair shaft, protecting it from harmful chemicals and pollution. The most important thing that conditioners do is this. When you condition your hair before you shampoo, the harsh chemicals in the shampoo don't get to your hair. Conditioners coat your hair so that shampoo can't get through. It helps keep the natural oils and moisture in your hair. Also, if you wash off the conditioner with the shampoo, your hair stays light longer. It is because left-over conditioners can make your hair look heavy and greasy. If you wash your hair in the opposite direction, you can give it a more gentle and nourishing wash. It will make your hair more bouncy and soft after you're done. It keeps hair products from building up, which is especially helpful for hair types that get clogged pores from product buildup. This method also keeps hair from getting damaged and stops split ends from happening. To keep hair from getting too healthy, you could also use hair masks and a technique called "reverse hair washing." Advantages Of Reverse Hair Washing - Helps give dull, flat hair a better texture. - Gives hair better nutrition without making it look flat. - Helps treat hair fall problems. - Gives hair more volume, shine, and bounce. - Lowers the amount of shampoo needed. - Helps keep hair from getting oily and greasy. - Stops buildup on the scalp and clogging of pores. Disadvantages Of Reverse Hair Washing Because you usually have to leave the conditioner on your hair after washing it to help smooth the cuticles and get the full benefits of this method, people with coarser or drier hair may not see the same benefits. Shampoos are usually made with a higher pH balance than conditioners so they can lift the cuticle. On the other hand, conditioners are usually made with a lower pH balance to restore the pH balance. If you don't want your cuticle to be raised after the conditioning treatment, you could try deep conditioning first, shampooing, and then finish with a milder conditioner. In other words, the middle spot is more of a reverse washing hair. Here, you can learn more about the pH levels of shampoos and conditioners and how these levels affect your hair washing routine when you use reverse washing. People who like to clean their hair well by using shampoos with sulfate or other strong cleansers may be unable to use this. You might find that your hair needs an extra conditioning step after shampooing to regain its moisture. We suggest trying it out once every couple of washes to find out which solution works best for you. Method Of Reverse Hair Washing - Soak your hair all the way. - Put conditioner through your hair and let it sit for 3–5 minutes. Don't put conditioner or a hair mask on your scalp or roots to keep your hair from getting greasy. - Rinse your hair with plain water in a gentle way. Avoid scrubbing your hair as you want the conditioner to stay as a coat on your hair for protection. - If your hair ends are dry and rough, put a lot of conditioner on them and splash water over them instead of washing them out. - Put a small amount of shampoo in your hair and rub it around. - Rinse your hair, and repeat shampooing if it is part of your routine. - Use a conditioner before the final rinse or leave-in conditioner while your hair is still wet. - After drying your hair with a towel, put a serum on it and let it air dry. You can boost your hair by reverse hair washing once a week. Remember that if your hair cuticles are damaged, the method might not work immediately. Keep doing what you're doing to let the conditioner do its job and fix your damaged hair. Thank you for reading to the end. We hope you learned everything you wanted to know about reverse washing hair. When someone asks you about reverse hair washing, share this guide with them.

https://www.thevoiceofwoman.com/reverse-hair-washing

en

Over 4,000 people were evacuated from their homes to clear the area. Minutes before the spectacular explosions, sirens rang out and water began to spray the structure from the tanks around the base. It took less than seven seconds for the towers to be razed to the ground. 550 kg of explosives were needed by demolition experts to take down the two large towers consisting of about 4,500 tonnes of concrete and steel. While it came crashing down, cannons were used to shoot water over 50 metres high to prevent the spread of dust. Built back in the 1960s and re-enforced in 2016, the Morandi bridge was a critical structure for Genoa and the whole country, serving the busy A10 motorway network that links northern Italy to France. The reconstruction of the bridge has been awarded to Italy’s biggest builder Salini Impregilo, shipbuilder Fincantieri and transport company Italferr. The 200-million-euro project will be overseen by Genoa’s world-famous architect Renzo Piano, who produced the design for free. The new bridge will include 43 lamps to honour the lives of the victims.

https://autojosh.com/watchremaining-parts-of-collapsed-genoa-

en

Posted By Dr Radhika During a pelvic floor physiotherapy appointment, the physiotherapist focuses on assessing and addressing issues related to the pelvic floor muscles. The specific details of the appointment may vary based on individual needs and concerns, but here’s a general overview of what typically happens during a pelvic floor physiotherapy session: - Initial Assessment: - The appointment usually begins with a thorough discussion about your medical history, symptoms, and any specific concerns you may have related to pelvic health. This information helps the physiotherapist understand your unique situation. - External Examination: - The physiotherapist may perform an external examination, assessing the alignment, mobility, and strength of the muscles around the pelvis, hips, and lower back. This examination helps identify any issues that may be contributing to pelvic floor dysfunction. - Internal Examination (with Informed Consent): - In some cases, an internal examination may be recommended. This involves a gentle, manual assessment of the pelvic floor muscles using a gloved and lubricated finger. The internal examination provides more detailed information about the strength, tone, and coordination of the pelvic floor muscles. - Biofeedback is a technique used to provide real-time information about muscle activity. Sensors or probes may be used externally or internally to monitor and display muscle contractions. This feedback helps you visualize and understand how to engage and relax your pelvic floor muscles effectively. - The physiotherapist will offer education about pelvic anatomy, the function of the pelvic floor muscles, and how these muscles relate to overall health. You may also receive guidance on lifestyle modifications, proper posture, and exercises to promote pelvic health. - Exercise Prescription: - Based on the assessment, the physiotherapist will develop a personalized exercise program tailored to your specific needs. This may include exercises to strengthen, relax, or coordinate the pelvic floor muscles. - Manual Therapy Techniques: - Hands-on techniques, such as massage, stretching, or myofascial release, may be used externally or internally to address muscle tightness, trigger points, or areas of tension within the pelvic floor. - Home Exercise Program: - The physiotherapist will provide you with a home exercise program, outlining exercises and techniques to be performed between sessions. Consistency with these exercises is essential for optimal results. - Follow-Up and Progress Assessment: - Subsequent appointments allow the physiotherapist to assess your progress, adjust the treatment plan as needed, and address any new concerns or questions you may have. In conclusion, navigating the realm of pelvic floor physiotherapy can be a transformative journey for women seeking improved pelvic health. As we step inside the room, the expertise and comprehensive care provided by professionals become paramount. Denison Rehabilitation Clinic stands out as a beacon of excellence, offering specialized pelvic floor physiotherapy sessions along with a range of other physiotherapy services. Their commitment to holistic well-being ensures that individuals receive personalized and effective treatments, fostering a supportive environment where women can embark on their path towards enhanced pelvic health and overall wellness. With Denison Rehabilitation Clinic, the journey to a stronger, healthier pelvic floor is guided by experienced hands and a dedication to empowering women in their pursuit of optimal well-being.

https://denisonrehab.com/blog/pelvic-floor-physiotherapy-

en

Logistics is a vast and complex field of the supply chain that involves the planning, coordination, and management of the movement and storage of goods and related information from the point of origin to the point of consumption. It plays a crucial role in businesses and organisations of all sizes across a wide range of industries. There are various ways to classify and differentiate logistics based on the activities and functions involved in an eCommerce business. This blog aims to provide insight into the different kinds of logistics in the modern landscape by looking at their purpose, processes, and applications. So, let’s dive in! Understanding The Logistics Functions Logistics plays a vital role in an organisation’s success because it ensures that products are available at the right time, at the right place, and in the right assortments. The modern logistics function is a system that helps companies manage the flow of products throughout their supply chain. It is designed based on the stated logistics objectives so that minimum cost would incur for the accomplishment of these objectives. Four Major Logistics Functions Below is a list of the major logistic functions. You should be familiar with them all. Transportation is the process of physically moving goods from one location to another. We can say logistics is transporting goods from point A to B. Transportation plays a crucial role in supply chain management, whether it’s moving raw materials to a manufacturing plant, finishing products to a warehouse for storage, or delivering goods to customers. Several different modes of transportation can be used in the eCommerce business, depending on the type and size of the goods being shipped, as well as the distance and speed of delivery. For example, large shipments of goods might be transported by truck or train, while smaller packages might be shipped by air or boat. Warehousing is a crucial function of logistics because it is where goods are stored until they are needed for distribution or use. These large facilities that are designed to store and manage a wide range of products provide a safe and secure location for storing goods, which can include everything from fragile items that need to be handled with care to heavy machinery that requires specialised equipment for handling. Warehouses are also designed to be highly organised to promote last-mile delivery in eCommerce. Goods are typically stored in designated areas and carefully labelled to ensure easy order fulfilment. Inventory management is an important function of logistics because it systematically tracks and controls inventory levels to ensure that the right amount of goods is available in the warehouses when needed. This is critical for eCommerce businesses because having too little inventory can result in lost sales and a bad customer experience. On the other hand, too much inventory can tie up capital and increase storage costs. Effective inventory management requires a careful balance between these two extremes, and it involves a range of activities such as forecasting demand, determining order quantities, and setting reorder points. It also involves using advanced systems and technologies to track inventory levels in real-time and generate reports and alerts when inventory is running low, or there are discrepancies in the data. Packaging is the process of designing and creating materials and methods for protecting and transporting goods safely and efficiently. It helps ensure that goods arrive at their destination in good condition, and it can also help improve the overall efficiency of the supply chain by reducing handling and storage costs. There are many different types of packaging goods, and it depends on the type of goods being shipped, as well as the distance and mode of transportation. Today businesses focus more on the packaging of products as it plays a big role in branding. What are 2PL, 3PL, and 4PL? There are different types of logistics an eCommerce business can avail according to the needs and size of operation. When an eCommerce store outsources only shipping and storage activities to an external provider is called 2PL. The 2PL operator, or second-party logistics, refers to a company that provides logistics services to another company on a contract basis and manages only one part of logistics without including integrated logistics solutions. 2PL can be a convenient and cost-effective solution for companies that need logistics services but want to avoid investing in their infrastructure or hiring a full-time logistics team. For example, a toy manufacturer must ship its products to national retailers. However, instead of managing the logistics by themselves, they hire a 2PL company to handle the transportation and warehousing. The 2PL company would then use its trucks and warehouses to store and transport the toys while the toy manufacturer focuses on other aspects of its business. 3PL, or third-party logistics, refers to a company that provides end-to-end logistics solutions to its client. These services include transportation, fleet management, inventory management, warehousing, packaging, and order fulfilment. 3PL is best for companies that need a wide range of logistics services and want to outsource them to a single provider. It’s like having your own logistics department without the hassle of managing it yourself! For example, a clothing retailer needs to ship its products to stores all over the country. Instead of managing the logistics by themselves, they hire a 3PL provider to handle everything. The 3PL provider would receive the clothing at its warehouse, sort and store it, and manage inventory, packaging, order fulfilment, and customer services. The retailer places its orders with the 3PL provider, and the 3PL takes care of the rest. 4PL, or fourth-party logistics, refers to a company that acts as a “lead logistics provider,” coordinating and integrating the activities of other logistics service providers (such as 3PLs, carriers, and suppliers) to create a seamless and efficient supply chain for its clients. 4PLs are often referred to as “integrators” because they combine all the different supply chain elements and manage them as a single entity. 4PLs can offer various services such as transportation management, warehousing and distribution, procurement, and inventory management. They may also provide consulting and advisory services to help clients optimize their supply chain operations. One key difference between 4PLs and traditional 3PLs is that 4PLs generally have a more strategic and consultative role, working with clients to develop customized supply chain solutions that meet their specific needs and goals. They may also take on more responsibility for managing and integrating the various components of the supply chain, including both logistics and non-logistics activities. For example, a fashion retailer must source materials from overseas suppliers, manufacture the products in multiple locations, and distribute them to stores and customers worldwide. Instead of managing the logistics by themselves, they hire a 4PL provider to handle everything for them. The 4PL provider works with the retailer to develop a customized supply chain plan that includes everything from sourcing and production to distribution and customer service. In addition, the 4PL coordinates with the retailer’s suppliers and manufacturers to ensure that materials and products are delivered on time. Finally, they use their transportation and warehousing network to store and ship the products to the retailer’s stores and customers. The 4PL also provides regular updates and reports to the retailer on the progress of the supply chain. In addition, they work with the retailer to identify opportunities for improvement and cost savings. Inbound and Outbound Logistics Logistics is a critical component of any business’s success. However, if you want your supply chain to be as efficient and effective as possible, you must know how inbound and outbound logistics work. What is Inbound Logistics? Inbound logistics refers to transporting and storing goods as they flow into a business from suppliers or manufacturers. It is a crucial aspect of supply chain management. It involves coordinating all the activities and resources needed to bring goods into a business and make them available for use or sale. Inbound logistics can include various activities, such as Procurement, Transportation, Warehousing, and Inventory management. Effective inbound logistics requires careful planning and coordination to ensure that goods are delivered on time and in good condition. It can help businesses reduce costs and improve efficiency by minimizing delays and waste. An example of inbound logistics would be: A furniture manufacturer needs raw materials such as lumber, fabric, and hardware from the supplier to produce its products. Therefore the manufacturer’s inbound logistics team is responsible for coordinating the procurement and transportation of these materials. First, the team works with the manufacturer’s purchasing department to identify the necessary materials and negotiate prices with the suppliers. They then coordinate with the transportation department to arrange for the materials to be shipped from the suppliers to the manufacturer’s warehouse. Once the materials arrive at the warehouse, they are inspected for quality and stored until they are needed for production. Features of Inbound Logistics - Coordination of procurement and transportation of goods from suppliers or manufacturers: Inbound logistics involves coordinating all the activities and resources needed to bring goods into a business from external sources. This includes identifying and purchasing the necessary materials and components from suppliers, as well as arranging for the transportation of the goods to the business. - Storage and management of goods in warehouses: Once goods are received from suppliers, they must be stored in a designated facility until they are needed for production or distribution. This could be a warehouse, a distribution centre, or other storage facilities. - Tracking and control of inventory levels: Inbound logistics also involves tracking and controlling inventory levels to ensure that the right amount of goods is available when needed while minimizing excess inventory. - Quality inspection of incoming goods: Ensuring that incoming goods meet the required quality standards is an important aspect of inbound logistics. This may involve inspecting goods for defects or damage upon receipt and taking appropriate action if any issues are found. - Use of advanced systems and technologies: Inbound logistics professionals often rely on advanced systems and technologies to facilitate their operations. These can include transportation management systems, warehouse management systems, inventory management systems, and other types of software and hardware that help to automate and optimize logistics processes. - Collaboration with suppliers and other partners: Inbound logistics often involves working closely with suppliers, carriers, and other partners to ensure that goods are delivered on time and in good condition. What Are The Outbound Logistics Of A Business? Outbound logistics refers to transporting and storing goods as they flow out of business to customers or other end users. It involves coordinating all the activities and resources needed to get goods from the business to their final destination. Outbound logistics can include various activities, such as order processing, transportation, warehousing, inventory management, tracking and controlling inventory, distribution, and delivering goods to customers. An example of outbound logistics would be: An online retailer sells various products to customers worldwide through its website. Therefore when a customer places an order, the outbound logistics team receives the order and retrieves the necessary products from the retailer’s warehouse. They then pack the products in a suitable shipping container, apply any necessary labels or markings, and arrange for the order to be shipped to the customer’s address. The outbound logistics team uses its transportation network and third-party carriers to deliver orders to customers. They also manage the retailer’s products’ inventory levels, ensuring a sufficient supply on hand to meet demand while minimizing excess inventory. Logistics distribution refers to moving goods from a central location to multiple distribution points or the end user. It is a crucial aspect of supply chain management, as it involves coordinating all the activities and resources needed to get goods to their final destination efficiently and cost-effectively. There are many factors to consider in logistics distribution, such as: - Transportation: Selecting the most appropriate mode of transportation, such as truck, rail, air, or sea, based on factors such as cost, speed, and the type and volume of goods being shipped. - Warehousing: Storing goods in a designated facility, such as a warehouse, until they are needed for distribution or delivery. - Inventory management: Tracking and controlling inventory levels to ensure that the right amount of goods is available for distribution when needed while minimizing excess inventory. - Distribution networks: Designing and implementing a network of distribution centers, warehouses, and other distribution points that can support the efficient flow of goods to customers or other end users. - Customer service: Providing timely and accurate delivery of goods to customers and responding to any issues or challenges that may arise during the distribution process. An example of distribution in logistics would be: A food manufacturer produces and packages various products, such as cereals, snacks, and beverages, at its central facility. The manufacturer’s logistics team distributes the products to customers and end users. The logistics team works with the manufacturer’s sales and marketing department to identify the demand for the products in different regions and markets. They then design a distribution network that includes warehouses and other distribution points in key locations, such as major cities or transportation hubs. The logistics team coordinates the transportation of the products from the central facility to the distribution points, using a combination of their fleet of trucks and third-party carriers. Is Distribution The Same As Logistics? Distribution and logistics are closely related, but they are different. Logistics refers to the planning, coordinating, and managing the movement and storage of goods, services, and related information from the point of origin to the point of consumption. It involves integrating various activities and resources, such as transportation, warehousing, inventory management, and customer service, to ensure that goods are delivered to their final destination efficiently and cost-effectively. On the other hand, distribution refers specifically to moving goods from a central location to multiple points of distribution or the end user. It is a key component of logistics. It involves the selection and coordination of the transportation and storage of goods and the management of inventory and distribution networks. So, while distribution is an essential part of logistics, it differs from logistics. Logistics encompasses a broader range of activities and functions necessary to manage the flow of goods and information throughout the supply chain. What Is Meant By Reverse Logistics? Reverse logistics is the process of managing the return and disposal of goods that are no longer needed or wanted by the customer. This is a crucial and complex aspect of supply chain management, as it involves coordinating the return of goods from multiple locations and parties and ensuring that they are correctly handled and disposed of. Reverse logistics also involves coordinating all the activities and resources needed to move goods back through the supply chain, either to the point of origin or to another location. An example of reverse logistics would be: A consumer electronics manufacturer sells smartphones and other devices to customers worldwide. When a customer returns a product to the manufacturer, the reverse logistics team receives the product and inspects it to determine the reason for the return. If the product is defective, the team arranges for it to be repaired or replaced. If the customer no longer wants the product, the team tries to resell it or find another use for it. The 5 Rs of Reverse Logistics - Return: it is the process of returning a product to the manufacturer by customers, either because it is defective, no longer needed, or for some other reason. - Resell: The process of selling a product that has been returned or is no longer needed by the customers. This can involve finding a new product customer or selling it through a secondary market. - Repair: The process of fixing a product or component that is broken or not functioning correctly. This can involve diagnosing and troubleshooting the problem, sourcing and replacing necessary parts, and testing the product to ensure it works properly. - Replace The process of exchanging a defective or unwanted product for a new or refurbished product. - Recycle: The process of breaking down a product or material into raw materials or components, which can then be used to create new products. Reverse logistics often involves coordinating the recycling of products or materials that are no longer needed or wanted to reduce waste and minimize environmental impacts. As an eCommerce business, you must know which logistics service is ideal for business. You may need a 2PL operator for fulfilment if you’re a small eCommerce store. Otherwise, a 3PL logistics company is the best if you’ve enough capital and need complete logistics expertise. Or 4PL logistics provider if you need expertise and consultation to optimize your supply chain, expand to different markets, and for end-to-end logistics solutions. There are logistics aggregators for small and medium eCommerce brands for their end-to-end logistics solutions, such as NimbusPost. These logistics aggregators help negotiate with shipping companies, calculate the shipping cost, and choose the courier partner through their AI-driven platform. Is Amazon a 3PL? Yes, Amazon is a 3PL (third-party logistics) company. The eCommerce giants not only offer their customers the means to sell their products online but also offer to store those products in their fulfilment centres, pick, pack, and ship them and provide customer service, including handling returns. Their service– Amazon FBA provides logistics services to businesses that sell their products through Amazon’s online marketplace. Amazon’s 3PL services include fulfilment (receiving, storing, and packing orders for shipment), transportation (using its fleet of planes, trucks, and delivery vans), and customer service (handling returns and resolving issues). Amazon’s vast network of 145 fulfilment centres worldwide allows it to offer fast and efficient delivery to customers in many countries.

https://nimbuspost.com/blog/types-of-logistics-know-the-different-

en

Assessment: When dentures break, it is crucial to assess the extent of the damage. Identify if it's a minor crack, a significant break, or damage to specific components like clasps or teeth. Immediate Response: In the case of a break, avoid attempting to fix it yourself with household adhesives. Instead, store the broken pieces safely and seek professional dental assistance promptly. Dental Consultation: Schedule an appointment with your dentist to evaluate the damage. Dentists have the expertise and tools to assess the break and recommend appropriate repair or replacement options. Definition: Emergency dentures are temporary prosthetics provided quickly to address immediate needs, such as after dental extractions or if existing dentures are irreparably damaged. Same-Day Service: Some dental offices offer same-day denture services to provide patients with a quick solution during emergency situations. Temporary Nature: Emergency dentures are not permanent solutions. They act as interim replacements until a more permanent and customized set can be designed. Search: If dentures are lost, begin by retracing your steps and thoroughly searching common places where they might be misplaced. Contact Dentist: Inform your dentist immediately about the loss. They can advise on the next steps, which may involve creating a replacement set. Purpose:Spare dentures are additional sets created to serve as backups in case of emergencies, loss, or damage to the primary set. Customization:Like primary dentures, spare sets are custom-made to ensure a proper fit and function. They are stored securely for use when needed. Immediate Dentures:In some cases, dentures are provided immediately after tooth extractions to ensure patients have teeth during the healing period. Post-Extraction Adjustments: Dentures may require adjustments as the gum and bone tissues heal, ensuring a proper and comfortable fit. Transition to Permanent Dentures: Once the healing process is complete, a more permanent set of dentures, tailored to the healed oral structures, may be recommended by the dentist.

https://www.londondenturecare.com/emergency-services.html

en

The Roman man who was boiled alive while trying to flee Vesuvius: Skeleton of 'Last Fugitive' who died horribly in cloud of 1000F toxic gas while clutching a wooden box containing a small ring in 79AD is unveiled - The remains of the man, who archeologists believe was between 40 and 45 years old, were uncovered by researchers in what was once the city of Herculaneum - Scientists believe the victim was killed just steps away from the sea as he tried to flee from the scorching magma and a cloud of ash and toxic gas which erupted from Mount Vesuvius - Unusually, the man's skeleton shows his face turned upwards, suggesting that he had faced the deadly cloud Extraordinary images reveal the skeletal remains of the 'last fugitive' who died a horrific death during the catastrophic Mount Vesuvius eruption in 79 A.D. The remains of the man, who archaeologists believe was between 40 and 45 years old, were uncovered by researchers in what was once the city of Herculaneum. Scientists believe the victim was killed just steps away from the sea as he tried to flee from the scorching magma and a cloud of ash and toxic gas. Unusually, the man's skeleton shows his face turned upwards, suggesting that he had faced the deadly cloud roaring towards him before his death. 'Most of the people we've found her at Herculaneum were face down, but maybe he was trying to reach a boat and turned because he heard the roar of the cloud racing towards him at 100km per hour,' Italian archeologist and site director Francesco Sirano told The Times. The man would have died instantly as a result of the near-1,000F (500C) cloud of ash and gas. 'At 500C, the brain and blood boils and flesh evaporates, leaving the bones, which need 1,000C to burn,' said biologist Pierpaolo Petrone. The victim appears to have been clutching what archeologists believe was a small leather bag containing a wooden box, from which a ring can be seen protruding. The skeleton was found in October, but unveiled on Wednesday in a press conference, in the same area where the remains of more than 300 victims had sought cover with hopes of being rescued by the ship fleet of Pliny Elder were found in the 1980s. Sirano and his team used special metal blades to slowly and carefully chip away at the lava rock that has kept the man trapped for 1,942 years. The man is believed to be the final victim of the eruption to be discovered as digging at the site comes to a close. An archeologist has compared the impact of the eruption on Herculaneum to the devastation caused by the atomic bomb in Hiroshima, Japan, during the Second World War. 'The remains of victims here have been found in a similar condition to those of Hiroshima,' Camardo told The Guardian. 'You really get a sense of the horror and tragedy.' Speaking about the ring discovered in the man's possession, archeologist Ivan Varriali said: 'The ring is reddish, meaning iron, but there is something green inside the box which could be bronze. 'The box looks like it was used to keep change, and if that's all he was carrying, he may not have been rich.' There remains much unknown about the man, dubbed the 'last fugitive', and how he came to be in that spot. 'Why wasn't he in the shelters with the others? Maybe he was a rescuer come ashore in the boat that has been already found nearby,' archeologist Domenico Camardo told the Times. Some researchers believe the man could have been a fugitive or a soldier that came ashore to help rescue those trapped during the volcanic eruption. '[He could have been] a soldier who was perhaps setting up a launch to rescue a first group of people on the high seas,' Sirano told ANSA. 'Or one of the fugitives, who had moved away from the group to reach the sea hoping to be able to embark on one of the lifeboats, who knows perhaps the last and most unfortunate of a group that had managed to take off,' Sirano added. Camardo said the eruption of Vesuvius hit Herculaneum differently to how it hit Pompeii. He said: 'Pompeii was destroyed by a rain of ash and lapillus, which buried it by three or four metres. Instead, Herculaneum was first destroyed by the pyroclastic cloud of a temperature of over 400 degrees. It burned trees, inhabitants and other forms of life.' The city was then hit 'by six waves of volcanic mud that arrived like a flood and froze it under almost 20 metres of material,' Camardo said. 'But this flood of mud, which then hardened, allowed the conservation of all the organic relics, as oxygen was not able to filter through… so today we find things like items of food, which haven't been found in Pompeii.' The eruption of Vesuvius on October 24, 79 A.D. buried Pompeii and the nearby towns of Oplontis, Stabiae and Herculaneum under ash, mud and rock fragments. It's estimated at least 2,000 people lost their lives in the wake of the eruption. Many of the remains from the eruption were discovered in the 1980s and 1990s, with one that experts are sure was soldier who ran into the ash and gas to rescue residents of Herculaneum. A recent dig in May unearthed part of his armor and a knapsack filled with an assortment of small carpentry tools that suggests he may have played a more important role. Sirano, who was also part of the May discovery, said: 'He may be an officer of the fleet that took part in the rescue mission launched by Pliny the Elder to help the people in the towns and villas nestled on this part of the Bay of Naples.' The man, dubbed skeleton number 26, was found in the ashes left behind the volcanic eruption, his face thrust into the sand and his arms bent forward as if reaching out for help. Skeleton number 26 was uncovered near the grave of the 'fugitive,' but included several artifacts that suggest he was not a prisoner on the ship. Archaeologists found a leather belt decorated with silver and gold plates around the man's waste, which also held the hero's sword with an ivory hilt. He had another dagger strapped to the belt on the other side of his body. Next to the remains sat a trove of coins splashed out on the ground – 12 silver denarri and two gold coins. Experts say the sum amount is equal to the monthly wages of a Pretorian Guard, which was an elite unit of the Imperial Roman army. These soldiers served as personal bodyguards to emperors, as well as intelligence for the military group. 'The skeleton that is the protagonist of this story,' archaeologists shared in a statement. 'A navy soldier who came to rescue the desperate people of Herculaneum, crammed in their hundreds for hours on the beach and inside the 'fornixes' or storing containers which were normally used for stowing nets and fishing equipment. 'A man who didn't make it, he too was killed in a few devastating instants by the pyroclastic surges that swept down from Vesuvius.' The eruption of Vesuvius in the year 79 A.D. instantly killed the inhabitants of Pompeii and neighboring Herculaneum, burying an area 12 miles from the volcano in ash in just a few hours. The eruption of Mount Vesuvius is one of the most famous and deadly natural disasters in history. The volcano killed thousands of citizens in Pompeii in just 15 minutes, most of who died from asphyxiation by the giant cloud of scorching volcanic ash and gases the eruption released. The clouds are more dangerous to humans than lava because they travel faster—up to 450mph—and can reach temperatures of 1,800F.

https://www.dailymail.co.uk/news/article-10265421/First-look-Fugitive-

en

We live in a world where we don’t go anywhere without cell phones. And most times, we are constantly disturbed by notifications of texts, emails, social mediaaccounts, and more. This article explains how to use the “Do Not Disturb” mode on Android. Android’s “Do Not Disturb” feature has been around since Android 5.0 Lollipop. It is like silent mode on steroids. It can be used to silence the phone quickly or automatically without tampering with apps and important notifications. Do Not Disturb is also suitable for when you don’t want to be disturbed by notifications and sounds on your phone. Notifications can be a huge distraction. “Do Not Disturb” reduces or completely silences your phone’s notifications, sounds, and alerts. Here are examples of instances you can put on the feature: - When you want to sleep or rest. - When you want your alarm to go off. - Or when you’re in a meeting. You can as well mute all interruptions except your favorite people. To access the “Do Not Disturb” feature, swipe down on your phone screen to see the quick-access control center. Then, swipe down again to expand the menu if you don’t see it in the first six options. If you still don’t see it, go to the second page of menu options. It will look like a circle with a horizontal line in the center. As mentioned earlier, this feature can silence your phone while still allowing important notifications to get through. You have to activate the “Priority Only” mode to do this. Here’s how to do it: - Go to “Settings.” - Go to Sound > Do not disturb > Priority only allows. - Toggle the notifications you want to get. You’ll see options regarding your alarms, reminders, events, messages, and calls. For example, choose to let your phone ring whenever you have certain reminders, events, notifications, or calls from a particular person or persons. Or, you can also allow repeat callers. A repeat caller calls from the same phone number more than once within 15 minutes. So if it’s an emergency and someone needs to contact you, they’ll be able to do so. You can use the feature either manually or automatically. First, we’ll go over the manual method. Then, you can use it manually for an amount of time. For instance, you want to take a quick 10-minute nap with no distractions or be at a movie theater. Then, you can quickly enable it in just a few steps. Note: the steps in this guide are based on Android 7.0 Nougat. - Swipe down to show the Quick Settings. - Tap “Do not disturb.” - Choose one of the three options mentioned above. - You can enable It “Until you turn this off” or for a specific time. - Tap Done. To disable Do Not Disturb manually, toggle it off from the Quick Settings. To enable “Do Not Disturb” automatically, you can enable it every night at a certain time and turn it off when your alarm goes off in the morning. That’s just one way to use it. Here’s how to set it up: - Open Settings>Sound > Do not disturb > Automatic rules. - You’ll see default rules for Weekend, Weeknight, and Event. Select one or “Add rule.” - Edit the rule to fit your needs. Voila! No more interrupting notifications and disturbing sounds.

https://www.novabach.com/how-to-use-do-not-disturb-mode-on-android/

en

We have received several questions from prospective students for Fall 2021 w.r.t the the US President Donald Trump’s tweet on immigration. While details of his plan are yet to emerge, we wanted to put out our perspective on said tweet from President Trump : In light of the attack from the Invisible Enemy, as well as the need to protect the jobs of our GREAT American Citizens, I will be signing an Executive Order to temporarily suspend immigration into the United States! — Donald J. Trump (@realDonaldTrump) April 21, 2020 So, what does this mean for prospective students applying for graduate studies to the US for Fall 2021? Currently, we believe that this tweet should not have much impact on students applying for Fall 2021. Our rationale is outlined in the article below. “Temporarily” indicates a short term measure (60 days) President Trump has mentioned a key word “temporarily” which indicates that this is a short term measure and is not something permanent. Currently, this seems to indicate a 60 day temporary ban on individuals seeking permanent residency (new Green Cards) only. This does not affect other temporary worker visas (eg. H1B visas) and student visas.While the details are still to emerge, we believe that for students who will be starting their studies in Fall (August/September 2021), this will have minimal impact. Their start dates are 15 months away and they will be graduating in 2023 which is almost 3 years away. 60 day ban is only on new immigrant visas (Green cards) and NOT on Student visas (F1), OPT and H1B visas which are Non-Immigrant Visas The tweet seems to indicate that the temporary ban is a 60 day ban only on immigrant visas (green cards). In fact, as of April 23, 2020, Trump told reporters at his daily White House news conference that: “This order will only apply to individuals seeking a permanent residency, in other words, those receiving green cards, big factor, will not apply to those entering on a temporary basis.” Now, all the visas mentioned below that students require are non-immigrant visas. - Student Visa (F1) : This is the visa that you get when you are going to attend university in the US for an undergraduate degree or a graduate degree (MS,MBA, Phd). The F1 visa or student visa is classified as a non-immigrant visa and hence should not be affected by this ban. - Optional Practical Training (OPT) : This is a period during which students with F-1 status who have completed or have been pursuing their degrees for one academic year are permitted by the United States Citizenship and Immigration Services (USCIS) to work for one year on a student visa. This applies towards getting practical training to complement their education. For students in STEM programs, they are eligible for a 24 month extension i.e.Science, Technology, Engineering & Mathematics students have a total of 3 years during which they can work in the US without requiring a separate work visa. Now, OPT is also considered a non-immigrant visa and hence should not be impacted by President Trump’s tweet. - Work visa (H1B) : Once a student completes their OPT, they need to get on an H1B visa to be able to continue working in the US. The US H-1B visa is a non-immigrant visa that allows US companies to employ graduate level workers in specialty occupations. Examples are fields like computer science,engineering, mathematics, sciences, IT etc. The H1B visa is considered a non-immigrant visa and as President Trump mentions immigration into the US, we expect that there will not be much of an impact on this category of visas. As all the above visas that apply to students and recent graduates are considered non-immigrant visas versus President Trump’s tweet on temporary stop on immigration, we do not expect much of an impact to prospective students for Fall 2021. STEM crisis and shortage in the US STEM refers to Science, Technology, Engineering and Mathematics (including computer science). With increased technology being adopted, STEM is becoming more and more important for countries to stay competitive. The US has a significant shortage of STEM graduates compared to a country like China. An article published in 2019 in the American Affairs journal titled “America’s stem crisis threatens our national security” highlights this shortage and how it impacts America’s ability to stay competitive with a country like China. A world economic forum report in 2016 in fact stated China had 4.7 million recent STEM graduates in 2016 whereas the USA had only 568,000 recent graduates. International students form a majority of STEM students enrolled in the US in graduate programs (MS,MBA and Phd). These STEM graduates are important to the US as they look to compete with China on technology. We expect that for students enrolling in STEM programs in good universities, there will continue to be opportunities available in the future as it is a need for the US economy. $39 Billion, economic impact of US education industry An ICEF Monitor report stated that around 1.2 million international students had enrolled in the US in 2017/2018. The annual economic impact of international student enrollment was estimated to be $39 Billion. This was estimated to support around 455,000 jobs. The US will not want to jeopardize such a huge industry which is supporting so many jobs. They will want to continue to attract students for higher education and be the favoured destination choice for students. President Trump is very focused on the economy. He has already been talking about opening up cities in a phased manner. Being an election year and with the focus on saving jobs, we believe that the US will want to continue to attract good students for their graduate programs (MS,MBA, Phd) and undergraduate programs. As per all the reasons outlined above, we believe that prospective students should continue to plan for applying to the US for Fall 2021. If for some reason, you later want to change your plans, you can always defer your admit. Should I apply to more than one country? We get asked this question a lot and so wanted to address it. Let us talk through the different country options. The USA is the world’s largest economy and a lot of the largest technology companies have started there. We expect that the US will continue to lead the world in innovation and will have several job opportunities for students, especially for STEM graduates. It also has the most number of universities and program options. So, we expect that the US will continue to be a top destination for international students. President Trump’s tweet is a short-term 60 day plan on new Green Cards and so will not have an impact on students who wish to pursue their graduate studies in the USA. Now, let us take the case of a country like Canada. With good universities (though the number of universities is fewer than the US) and easier immigration/ visa policies, Canada has been gaining popularity among students over the last couple of years. Certain cities like Toronto and Vancouver have attracted several tech and financial firms. They also have easy access to the US. Microsoft for example has a large technology center in Vancouver. Vancouver is a 4 hour drive from Seattle where Microsoft is headquartered. While Canada is a much smaller economy than the US and hence will not have the same number of jobs as the US, factors such as its proximity to the US, availability of good universities and easier immigration policies make Canada a good second choice for students. Europe is another destination that students consider. Germany is a popular choice among students especially for engineering. In 2019, the UK introduced a policy to make a 2 year work visa available to international students graduating from a British university. This was a significant increase from the period of 4 months offered earlier. Hence, UK is increasing in popularity though the impact of Brexit on the economy remains to be seen. The decision to apply to more than 1 country for graduate study should be taken into consideration after analyzing the degree/specialization that the student wants to apply for and the job opportunities available in each country post graduation. The choice should be more strategic taking into account a student’s professional goals and degree/specialization. For each country that a student applies to, they will need to bucket their applications into ambitious, practical and safe university applications. Hence,applying to more countries may require more university applications from a student perspective. An experienced Admissions Counsellor can help students navigate through some of these decisions. Looking to connect with an admissions counselor for personalized guidance during these times? Talk to a Counselor!At Galvanize Test Prep, we offer our students the option to apply to two separate countries as part of our Premium Admission Counselling package. We usually recommend that students stick to one or maximum two countries in most cases as for each country, one needs to apply to enough ambitious, safe and practical universities to maximize chances for admission. We hope that this article helps answer some of the questions that prospective students for Fall 2021 may have. As the situation evolves, we will continue to put out more information. Liked the article “Trump’s tweet on immigration”? Comment your opinions down below Other Useful Links: - [Fall 2021] Get a customized action plan for your application to universities in the US, UK, Europe, Canada or Australia now! - [Vocab App] Staying home? Good. Stay safe and continue learning for your ‘study-abroad’ tests with the free Galvanize Vocabulary Builder App!

https://galvanizetestprep.com/blogs/coronavirus-effect-on-

en

Throughout the centuries, St. Michael the Archangel has remained God’s warrior angel of peace. Michael arose from celestial obscurity to put an end to Lucifer’s and his henchmen’ rebellion. Michael, whose name means “Who is like God?” in Latin, Quis ut Deus?, demolished Lucifer’s scream of “Non Serviam!” — “I will not serve!” — to the point where Christ said, “I have seen Satan fall like lightning from the heavens” (Lk 10:18). The conflict in heaven, of which the Book of Revelation speaks: “Then war broke out in heaven; Michael and his angels battled against the dragon,” did not end St. Michael’s thwarting of the evil one and all his activities. The dragon and its angels battled back, but they were defeated, and their seat in heaven was taken away. The enormous dragon, the old serpent known as the Devil and Satan, who deceived the entire universe, was flung down to earth, together with its angels” (Rv 12:7-9). Each human soul serves as a battleground for Satan to deceive and seduce. It is one that is “waged every day: it is waged in the hearts of men and women,” as Pope Francis put it. Despite the fact that he has already been beaten and will never be able to overthrow God, Satan continues to try to seduce souls blinded by ego and passion for sin in his haphazard attempt to shift hearts and minds away from God. The secret realm of sin is always outweighed and outshined by the virtues of St. Michael the Archangel. Michael’s pursuit of those who mocked God was motivated by devotion, humility, and unwavering faith – weapons far more formidable than anything Satan can conjure. Not just Satan, but life’s trials: even in the midst of health crises, plagues, and pandemics, the holy Godhead dispatched St. Michael to bring strength and hope to a beleaguered people. Even when a situation seemed hopeless or catastrophic, God’s constant presence encouraged the faithful to stay firm, united, and to put on the armor of God (cf. Eph 6:10). In the COVID-19 pandemic of 2020, when millions of people over the world get the virus, hundreds of thousands die, and scores of families and livelihoods are thrown into disarray as a result, St. Michael the Archangel stands ready to save humanity once more. Here are a few examples throughout Church history when St. Michael interceded during times of plagues. It was the Dark Ages at the time. Pelagius II, Pope Gregory’s immediate predecessor, died of the plague that ravaged the Eternal City. Gregory had to rely on spiritual sustenance because there was little material aid left to help the Roman people. On the morning of April 25, 590, the pope led a penitential procession through the abandoned streets of Rome, a picture Pope Francis replicated in his March 15, 2020 walking pilgrimage through an abandoned Rome. The feast of St. Mark is celebrated on April 25 in the present Church calendar, however Pope Gregory originally designated that day as the Greater Litanies. The people were so unwell on April 25 when the pope carried the sacred icon of Our Lady of Santa Maria Maggiore that some in the procession fell. A celestial choir, intoning the Regina Caeli, directed the procession’s eyes skywards as it crossed the Aelian Bridge across the Tiber in the shadow of Hadrian’s mausoleum — the vast, towering stronghold built for the Roman Emperor Hadrian in A.D. 135 — Gregory then saw above Hadrian’s mausoleum the glorious and fearless St. Michael in the process of cleaning blood from his sword and sheathing it, according to the Legenda Aurea, an immensely popular collection of stories gathered by chronicler-priest (and archbishop of Genoa) Jacobus Voragine (1228-98). The disease is said to have ceased at that point. Hadrian’s tomb is today known as Castel Sant’Angelo, and a statue of St. Michael stands atop its parapet, punctuating the Roman sky. A pandemic ravaged Mexico in 1631. On April 25, the Greater Litanies procession was held at the village of San Bernabe in the little state of Tlaxcala, much as Pope Leo oversaw on that same day in 590. Smallpox decimated the municipality of Nativitas in 1631, much as the plague ravaged the Roman population that year. Diego Lazaro, a 17-year-old teenager, was one of many who contracted the sickness. Diego did, however, take part in the sombre procession. St. Michael appeared again on April 25, 590, but only to Diego Lazaro. In the apparition, Michael directed Diego to a spring of water that would cure individuals suffering from smallpox. Diego Lazaro, on the other hand, preferred to disregard the incident. He was anointed and given the last rites as his condition deteriorated. Michael reappeared at that precise time, taking Diego to the amazing spring. The date of Diego Lazaro’s second apparition was May 8, 1631, a feast day for St. Michael in the Church calendar. The miraculous spring was soon discovered by the general public, and three government inquiries determined that Diego was not making up the story. The spring was renamed St. Michael’s Well once the residents of the area regained their health. San Miguel del Milagro — the Miracle of St. Michael — is the name of the place in Nativitas where Diego Lazaro restored hope to his beleaguered people. The St. Michael Sanctuary on Monte Gargano in Italy is the world’s oldest shrine devoted to the archangel. The residents of the region were decimated by a disease in 1656. Bishop Alfonso Puccinelli prayed and fasted to St. Michael for some sort of miraculous intervention, if it was God’s will. On Sept. 22, while the bishop was praying in his room, Michael appeared to him and told him to engrave a mark on the grotto stones. The stones were then to be blessed and delivered to the people of the region by Bishop Puccinelli. The pestilence would not affect anyone who had such a stone. The epidemic was quickly eradicated. Bishop Puccinelli was so grateful that he had a monument built in the town plaza with the inscription: Venerable Philomena de Santa Colomba In the 19th century, a holy woman named Venerable by Pope Leo XIII was helpful in teaching devotion to St. Michael. Philomena saw visions similar to those given to the peasant children of Fátima in the following century: images of a world in disarray, with three-quarters of the planet afflicted by plagues and violence. Even if a nation will soon capture the Eternal City in her lifetime, Philomena was assured in one vision that the pope would not be compelled to flee Rome. St. Michael appeared to Philomena in another vision a year before she died, telling her to “make known to men the immense power which I have with the Most High.” Tell them they can ask me anything they want. Tell them that my power in favor of those who love me knows no bounds. “Make my brilliance known.” God had been preparing Philomena for this mission by instilling a special devotion to the Sacred Heart of Jesus, Mary Immaculate, and St. Michael in her heart. “This new Trinity, like the Unity of the Three Divine Persons in Heaven, must be blessed and celebrated on earth,” she is instructed. Happy is the nation, happy is the country, happy is the monastery that will be fueled by this devotion.” Scripture, Church tradition, miracles, apparitions, and unceasing prayer have all attested to St. Michael’s glory. He is still willing to help at this hour, at this time, if we only ask for it. Share this post on Leave a Reply

https://onlinestudyingservices.com/2021/12/31/st-michael-the-archangel-

en

Columbia University scientist says special ultraviolet lamps could kill coronavirus lingering in the air at hospitals and schools - Conventional ultraviolet light (UV light) has been used to clean hospital rooms and equipment, but it can cause skin cancer and cataracts in humans - Scientists are studying a special type of UV light, known as far-UVC light, that can kill microbes without penetrating human skin - A 2018 study found that it can kill more than 95% of viruses like the coronavirus - China and South Korea are currently using UV light to clean buses and trains to speed up the reopening of mass transit - Here’s how to help people impacted by Covid-19 A scientist at Columbia University in New York says a certain kind of light may be the secret to killing off the novel coronavirus. Dr David Brenner, director of the school's Center of Radiological Research, has been studying how to use ultraviolet light - better known as UV light - to prevent the spread of diseases for years. Germicidal UV light is used in hospitals and medical centers to clean rooms and equipment, but it's a health hazard to humans and can cause skin cancer and eye diseases. But there is a special type of UV light called far-UVC light that kills microbes but is not dangerous. Scientists are studying a special type of UV light, known as far-UVC light, that can kill microbes without penetrating human skin (pictured) A 2018 study found that it can kill more than 95% of viruses like the coronavirus. Pictured: Ambulance workers pickup an elderly man from Cobble Hill Health Center in Brooklyn, New York, April 18 China and South Korea are currently using UV light to clean buses and trains to speed up the reopening of mass transit. Pictured: A bus is being disinfected by ultraviolet light in Shanghai, China, March 4 Conventional germicidal UV light kills microbes but also penetrates the skin, raising the risk of various forms of skin cancer as well as cataracts. Far-UVC light, on the other hand, is powerful enough to be used as a cleanser but does not damage skin cells. Before the coronavirus outbreak occurred, Brenner was studying whether far-UVC light could kill airborne viruses, in preparation for flu season. A 2018 study published in Scientific Reports, which Brenner co-authored, shows that the light can kill more than 95 percent of viruses like the coronavirus. That's because the virus is covered with a thin membrane that is easily broken apart by UV rays. Brenner's team has since tested the light against two seasonal coronaviruses, and is now testing the strain responsible for the pandemic, SARS-CoV-2. 'We saw we can kill 99 percent of the virus with a very low dose of far-UVC light,' he told ABC News. 'There's no reason to believe it's going to be different from these results.' However, there is one hiccup. Far-UVC lamps have not yet been approved by the US Food and Drug Administration. If they are approved, Brenner told ABC News they could be used in any public places include modes of transport like airports and train stations, in addition to schools and hospitals. 'Right now there is no real approach to trying to reduce the amount of viruses in a room where people are and somebody sneezes and coughs,' he said. 'If you could actually decontaminate the air around you pretty quickly, that would be a real plus.' When states begin to re-open their economies, disinfection - of door handles, mass transit system, elevators and such - will be a top priority to prevent a second wave. In China and South Korea, either installed UV light or attached to robots is being used to clean buses, trains and more in just five minutes. Many health experts say this method is safer, faster and cheaper than other disinfecting measures and could accelerate the reopening of the economy. In the US, there are currently 771,000 confirmed cases of the virus and more than 41,000 deaths. Most watched News videos - Disgraced presenter Huw Edwards arrives at court for sentencing - Australian tourist 'lynched' after streaking through Italian town - David Lammy complains of no taxpayer budget for Starmer's clothes - Old clip of 56-year-old man who attempted to kill Trump resurfaces - Barrister on former BBC presenter Huw Edwards: His sentence is a joke - Dame Angela Eagle dodges questions on PM's luxury glasses habit - Smoke from Halen Môn smokery causes dispute with Anglesey Sea Zoo - Dominique Pelicot's lawyer: 'He asked his wife to forgive him' - Huw Edwards leaves court following sentencing - Starmer and Meloni giggle as they pose for photos in Villa Doria - Scene after pagers explode and wound hundreds of Hezbollah fighters - Gisele Pelicot arrives at the criminal court in Avignon

https://www.dailymail.co.uk/health/article-8237137/Columbia-scientist-says-

en

While many industries are struggling amid the coronavirus pandemic, both the IT industry and the broader trend of transition to remote work have revealed many areas where traditional approaches to managing businesses create unnecessary waste. Still, data science and its subdivision – machine learning – reveal that such expansion is nearly limitless. Machine learning uses powerful algorithms to discover insights based on real-world data that can then be used to make predictions about future outcomes. As new data comes available, machine learning programs can automatically adapt and produce updated predictions. As with any tool, machine learning is not a silver bullet. However, there are many situations in which the technology can outperform linear and statistical algorithms. Here are five of the most common use cases where machine learning can make a big difference: When engineers can’t code rules for certain problems Many human-oriented tasks (such as recognising whether an email is spam) aren’t solvable using simple (deterministic), rule-based solutions. Because so many factors may influence an answer, engineers would have to write and frequently update billions of lines of code. In addition, when rules depend on too many factors, and when those rules overlap or need fine-tuning, it becomes difficult for humans to code precise rules. Fortunately, machine learning programs don’t require users to encode actual patterns. These programs only need proper algorithms to extract patterns automatically. When you need to scale a solution to millions of cases You might be able to manually categorise a few hundred payments as either fraudulent or not. However, this becomes tedious or impossible when dealing with millions of transactions. As user bases grow, it’s no longer feasible for organisations to process payments by hand – end-users today want answers about their money in milliseconds, not minutes or hours. Machine learning solutions are effective at handling these types of large-scale problems with little or no human intervention. When you can do it manually, but it’s not cost-efficient There are situations in which in-house experts could process many requests quickly and accurately but at a high cost. For instance, imagine you assess DMV forms for in-state and cross-state car purchases to determine their validity before passing them on. In this situation, the business processes are well-defined, optimised, and serialised. It may take only a few minutes to check each form thoroughly. But allocating so much manual labor to this work is likely not the best use for your budget. Machine learning, on the other hand, offers predictable, pay-as-you-go pricing for fully scaled operations. When you have a massive dataset without obvious patterns Consider this – you’ve successfully prepared a well-curated dataset and know the underlying problem. However, you don’t see any explicit patterns in the data, preventing you from encoding those validations. Plus, there are many typos, missing fields, and other human-caused errors with no validation in place. You may even know the data is poor quality and can manually determine every affected row. But you can’t see any actual connections between valid and invalid records. Machine Learning algorithms can solve this problem. They can find hidden connections between data points that aren’t clear to humans. Tools like Interpreting Tracers can even describe how machine learning models arrive at their conclusion. When you live in an ever-changing universe (adaptive) The world, and its problems, are always changing. A problem you solved yesterday can easily mutate into something else entirely, rendering your previous solution inefficient or even useless. For example, if your organisation processed medical appointment recordings to extract diagnoses, procedure information, and billing codes, your rules might have to evolve constantly. However, you can’t make updates in real-time 24/7. Meanwhile, incorrectly labelled items could lead to insurance rejections, huge fines, and legal penalties. One major advantage of machine learning methods is that they can learn from data across the entire lifecycle of your application – from the first line of code written to the moment when the model is finally shut down. Moreover, it’s important for production-grade systems to have feedback loops so that you can catch the moment when your model no longer solves problems correctly. It’s important to remember that machine learning is a tool – it’s not magic. Machine learning models are essentially advanced math-based algorithms, which identify patterns in data and learn from them. However, when properly applied to the right use cases, machine learning can reduce the amount of time spent error-prone manual IT operations, adding significant business value and greatly reducing IT costs. Interested in hearing industry leaders discuss subjects like this? Attend the co-located 5G Expo, IoT Tech Expo, Blockchain Expo, AI & Big Data Expo, and Cyber Security & Cloud Expo World Series with upcoming events in Silicon Valley, London, and Amsterdam.

https://artificialintelligence-news.com/2019/03/15/machine-learning-

en

“Nothing crosses into Nigeria and nothing comes out. It’s hermetically sealed,” said Amadou Idi, sitting in a makeshift shelter to keep out of the rain, and reflecting on the downturn in his luck. “We twiddle our thumbs and pray.” Idi’s job is a transiting agent — to get goods across the border to Nigeria at the Dan Issa frontier post in southeastern Niger. But he has been out of work since Nigeria dramatically closed its borders with its neighbours on August 20, declaring it wanted to put an end to chronic smuggling. Nigeria Custom has vowed the border will remain closed until all neighbouring borders do something about the smuggling incidences from their country. Niger, which shares a 1,500-kilometre (900-mile) border with Nigeria, has been badly hit by the closure, along with Benin. Both nations are among the poorest in the world. A long line of lorries from Niger and elsewhere in West Africa is stranded at Dan Issa. Some are full, some laden with goods. The drivers and their assistants sleep on the ground or in the cabins of their vehicles. All along the 30 kilometre road between the border and the city of Maradi, customs officials and police officers sip tea or coffee and chat. Groups of young people at a loose end and motorbike taxi drivers short of customers play cards under the shade of the trees. Three and a half million people live in and around Maradi. Concern and indignation are growing among the people there, most of whom survive on agriculture and trade. That makes them highly dependent on their southern neighbour Nigeria, the biggest economy in west Africa with its oil riches and 190 million people. “Maradi is suffocating,” said Ali, a kabou-kabou driver, the local motorbike taxi. “The city is usually bustling with people — now it’s almost dead.” “We are very angry,” said Ahmadou Amadou, who imports motorbikes for a living. “The business sector is wasting away.” If the border closure continues, then they will be ruined, he added. Some locals remember the last time this happened, back in the 1980s — and it lasted two years. And it was the same president, Muhammadu Buhari, who was responsible. Buhari closed the borders shortly after he came to power. From April 1984 to February 1986 he kept them closed in response to the falling price of oil, a drop in exports and the smuggling of contraband. In fact the border was only reopened after Buhari was toppled in a coup. Amadou Oumarou, another Maradi resident, said his government should sit down at the table with Nigeria and negotiate a solution. Falling prices are hitting locally made products due to a lack of buyers in Nigeria, while the price of products imported from Nigeria is soaring, he said. Some traders are selling their rice cut-price just to get rid of their stock, said Chaibou Tchombiano, general secretary of Niger’s union representing traders, importers and exporters. “We used to sell a 100-kilo (220-pound) sack of cowpeas for 18,500 CFA francs ($30, 27 euros). The price has fallen to 17,000, even 16,000 francs, since the border was closed,” said cereal trader Haruna Moussa. The impact of the closure is having a ripple effect reaching as far as the capital Niamey, 650 km away. “A tonne of imported cement (produced by the Nigerian corporation Dangote), which used to sell for 95,000 CFA francs has gone up to 120,000 francs, and cigarettes have risen from 25 to 100 francs each,” said Mamanane Nouri, head of a consumers’ group. Ironically, one effect of the border closure seems to have been a rise in smuggling, which is taking place under the nose of customs officials. A steady stream of motorcycles and vans took rice, beans and other products over to Nigeria, cutting trails across fields, an AFP reporter saw. They came back laden with petrol, sugar cane and sweet potatoes, as well as parts for cars and motorbikes. As one local, carrying two goats on the back of his bike, put it: “If we just sat there, waiting for the border to open, we’d die of hunger.” “Here, young people start trading from the age of 12,” said local radio journalist Mansour Sani. “If the border stays closed for a long time, it will be a time bomb.”

http://lanrenews.com/border-closure-we-twiddle-our-

en

- File size: 83.24MB - Uploaded: 2021-06-30 17:46:51 About Audio Formats Audio can be stored uncompressed, as with .aiff and .wav files. Lossless compression schemes, as used in .flac files, preserve the original sound quality by only removing unnecessary and redundant data. MP3, by far the most popular audio format, removes data using a lossy scheme which results in a slight loss of audio quality but significant compression. The AAC format is capable of better audio quality than MP3 at the cost of less compression. This file was uploaded from Nigeria on June 30, 2021 at 5:46 PM MediaFire scans high-risk files using VirusTotal. You are downloading this file with Chrome.

https://www.mediafire.com/file/92l3ymdfi4pzyi6/DJ_Oskybaddo_-

en

In a world marked by injustice, moral decay, and the noise of battle, it can be challenging for Christians to navigate through life while staying true to their faith. However, as followers of Christ, we are called to finish well, remaining steadfast in our commitment to God’s truth, love, and righteousness. In this blog post, we will explore the biblical principles and verses that can guide us on this journey, equipping us to persevere and make a lasting impact in our generation. - Seek Justice: In the midst of a generation marked by injustice, the Bible calls upon Christians to be champions of righteousness. Micah 6:8 encapsulates this divine mandate, stating, ” He has shown you, O mortal, what is good. And what does the Lord require of you? To act justly and to love mercy and to walk humbly with your God.” These words remind us of our responsibility to seek justice, to advocate for the oppressed and marginalized, and to strive for a more equitable society. As followers of Christ, we are called to emulate His character and values. God is inherently just, and throughout the Scriptures, we find His heart for justice and His longing for His people to stand against injustice. In Isaiah 1:17, God instructs His people, saying, “Learn to do right; seek justice. Defend the oppressed. Take up the cause of the fatherless; plead the case of the widow.” This demonstrates that seeking justice is not merely a suggestion but a commandment from our Heavenly Father. To seek justice is to align ourselves with God’s desires and purposes. It involves actively advocating for fairness, equality, and the well-being of all individuals, regardless of their social status or background. It requires us to address systemic issues that perpetuate injustice and to work towards dismantling oppressive structures in our society. As Christians, we are called to be the voice for the voiceless and to defend the rights of the marginalized. Proverbs 31:8-9 implores us, saying, “Speak up for those who cannot speak for themselves, for the rights of all who are destitute. Speak up and judge fairly; defend the rights of the poor and needy.” This verse highlights our responsibility to use our influence, resources, and platforms to bring about positive change and to promote justice in all areas of life. In seeking justice, we must also cultivate a heart of mercy and humility. Our pursuit of justice should not be driven by a desire for revenge or self-righteousness but by a genuine love and compassion for others. Jesus Himself embodied this balance of justice and mercy. He confronted injustice and spoke out against oppression, but He also extended grace, forgiveness, and compassion to all, even to those who wronged Him. Walking humbly with God is an integral part of seeking justice. It reminds us that justice is not achieved through our own strength or wisdom but through a humble reliance on God’s guidance and empowerment. We should continually seek His wisdom, discernment, and guidance as we navigate through complex issues of injustice in our society. Seeking justice as Christians requires action. It involves educating ourselves about the systems and structures that perpetuate inequality, advocating for policy changes, supporting organizations that promote justice, and actively engaging in acts of service and compassion towards those who are marginalized. It is an ongoing commitment that requires perseverance, resilience, and a willingness to step out of our comfort zones. - Guard Against Moral Decay In our current generation, moral decay has become increasingly pervasive, with societal values drifting further away from the timeless principles laid out in the Bible. As followers of Christ, it is crucial for us to recognize this reality and actively guard our hearts and minds against the corrupting influences of the world. Proverbs 4:23 offers valuable guidance in this regard, stating, “Above all else, guard your heart, for everything you do flows from it.” This verse emphasizes the importance of protecting the core of our being, as it shapes our thoughts, actions, and decisions. To guard against moral decay, we must first immerse ourselves in the Word of God. The Bible serves as the ultimate source of truth and wisdom, providing us with the foundation for living a morally upright life. Psalm 119:11 declares, “I have hidden your word in my heart that I might not sin against you.” By studying and meditating on Scripture, we gain a deep understanding of God’s standards of morality, enabling us to discern right from wrong and make choices that align with His will. Furthermore, guarding our hearts requires a deliberate effort to filter the influences that surround us. In today’s digital age, we are bombarded with various forms of media that can shape our beliefs and values. We must exercise discernment and critically evaluate the content we consume, ensuring that it aligns with biblical principles. Philippians 4:8 offers valuable guidance in this regard, urging us to focus on whatever is true, noble, right, pure, lovely, admirable, excellent, and praiseworthy. In addition to guarding our hearts and minds, we should actively engage in spiritual disciplines that strengthen our moral foundation. Regular prayer, worship, and fellowship with other believers provide the necessary spiritual nourishment to withstand the temptations and pressures of the world. These practices help us to stay rooted in our faith and resist the allure of moral compromise. Moreover, guarding against moral decay requires intentional accountability. Surrounding ourselves with fellow believers who share our commitment to moral integrity can provide support, encouragement, and correction. Proverbs 27:17 emphasizes the importance of iron sharpening iron, highlighting the value of relationships where we can challenge and sharpen one another in our pursuit of righteousness. It is important to note that guarding against moral decay does not mean isolating ourselves from the world. Instead, we are called to be salt and light in a dark and decaying world (Matthew 5:13-16). We have a responsibility to engage with the culture around us, shining the light of Christ and embodying His love and truth. This requires wisdom and discernment, as we navigate the tension between standing firm in our convictions and extending grace and compassion to those who may hold different beliefs. - Be a Light in the Noise of Battle In the midst of the overwhelming noise of battle that characterizes our generation, it can be easy to get lost and consumed by the conflicting worldviews, ideologies, and opinions that clamor for our attention. However, as Christians, we are called to be a light in the darkness, a beacon of hope and truth amidst the chaos. In Matthew 5:14-16, Jesus tells his followers, “You are the light of the world. A town built on a hill cannot be hidden. let your light shine before others, that they may see your good deeds and glorify your Father in heaven.” These words provide us with a clear directive on how we should navigate the tumultuous times we live in. To be a light in the noise of battle means living lives that reflect the love, grace, and truth of Christ. It means embodying the teachings of Jesus in our actions, words, and attitudes. In a world that is often characterized by division, hostility, and despair, we have the opportunity to demonstrate a different way of living. We can be a source of encouragement, compassion, and reconciliation. One practical way to be a light in the noise of battle is to engage in genuine relationships with others, regardless of their backgrounds or beliefs. By loving our neighbors as ourselves, we can bridge the gaps that separate us and foster understanding and empathy. Jesus himself demonstrated this inclusive love by associating with people from all walks of life, including tax collectors, sinners, and outcasts. We should follow his example and extend grace and acceptance to those around us. Another way to be a light is to actively pursue justice and work towards the betterment of society. As Christians, we are called to stand up against oppression, inequality, and injustice. This may involve advocating for the marginalized, speaking out against discrimination, or working towards systemic change. By addressing the brokenness in our world, we can demonstrate the transformative power of the gospel and offer a glimmer of hope to those who are suffering. Additionally, we should strive to engage in respectful and constructive dialogue with those who hold different perspectives. In a time when echo chambers and polarization are prevalent, it is essential to approach conversations with humility, openness, and a willingness to learn. By seeking common ground and demonstrating the love of Christ in our interactions, we can foster understanding and potentially change hearts and minds. Ultimately, being a light in the noise of battle requires a deep and intimate relationship with God. It is through prayer, studying the Scriptures, and seeking the guidance of the Holy Spirit that we can discern how to navigate the complexities of our world. By staying connected to the source of light, we are better equipped to shine brightly and make a meaningful impact. - Persevere in Faith To finish well in our faith, we must cultivate perseverance, especially when confronted with trials and challenges. James 1:12 provides us with encouragement, stating, “Blessed is the one who perseveres under trial because, having stood the test, that person will receive the crown of life that the Lord has promised to those who love him.” This verse reminds us of the rewards that await those who remain steadfast in their faith. It emphasizes the importance of enduring through difficult circumstances and trusting in God’s promises. Perseverance in faith requires holding fast to our beliefs even when faced with adversity. It means not allowing discouragement, doubt, or hardship to shake our foundation. Instead, we rely on God’s strength and guidance to navigate through the challenges that come our way. In times of trial, we can find comfort and hope in knowing that God is with us, providing the strength we need to persevere. Furthermore, our perseverance serves as a testament to others. When we remain faithful in the face of difficulties, we demonstrate the transformative power of God’s grace in our lives. Our steadfastness can inspire and encourage those around us who may be going through their own trials. By choosing to trust in God and persisting in our faith, we become living examples of His love and faithfulness. There are practical steps we can take to cultivate perseverance in our faith. Firstly, we must prioritize our relationship with God through prayer, worship, and studying His Word. These spiritual disciplines deepen our understanding of God’s character and promises, providing us with a solid foundation to stand on when challenges arise. Regularly seeking His presence and guidance strengthens our faith and equips us to persevere. Secondly, we can surround ourselves with a community of believers who can offer support, encouragement, and accountability. The journey of faith is not meant to be traveled alone. Having trusted companions who can walk alongside us during difficult times can provide the strength and perspective we need to press on. Together, we can remind one another of God’s faithfulness and spur each other towards perseverance. Additionally, it is crucial to maintain a proper perspective amidst trials. Rather than viewing challenges as obstacles to overcome, we can choose to see them as opportunities for growth and refinement. James 1:2-4 reminds us, “Consider it pure joy, my brothers and sisters, whenever you face trials of many kinds because you know that the testing of your faith produces perseverance. Let perseverance finish its work so that you may be mature and complete, not lacking anything.” This perspective shift allows us to embrace trials as a means of spiritual development and draws us closer to God. - Stay Rooted in Prayer and Community In the journey of the Christian faith, staying rooted in prayer and community is essential for a fruitful and fulfilling life. In the midst of life’s challenges and battles, maintaining a consistent prayer life becomes a source of guidance, wisdom, and strength. The Apostle Paul, in his letter to the Thessalonians, urged them to “pray continually” (1 Thessalonians 5:17), emphasizing the importance of an ongoing and uninterrupted connection with God. Prayer is not just a religious duty or a ritual, but a means of communication with the Creator of the universe. It is through prayer that Christians can express their deepest desires, concerns, and gratitude to God. By engaging in regular prayer, believers open up their hearts and minds to God’s leading and find comfort in His presence. Prayer provides an avenue for seeking divine guidance in making decisions, finding solutions to problems, and overcoming personal struggles. It is a way of acknowledging our dependence on God and aligning our will with His. Furthermore, prayer is not limited to the private moments between an individual and God. It can also be expressed in the context of a community of believers. By surrounding ourselves with fellow Christians, we create a supportive environment that fosters growth, accountability, and encouragement. The writer of Hebrews exhorted believers not to neglect meeting together but to spur one another on toward love and good deeds (Hebrews 10:24-25). In the fellowship of believers, there is an opportunity to share burdens, celebrate victories, and learn from one another’s experiences. Being part of a community of believers provides a sense of belonging and unity. It helps individuals to realize that they are not alone in their struggles and that there are others who can empathize and offer support. In times of doubt or discouragement, the community can rally around and provide the necessary encouragement to persevere. Likewise, in times of joy and celebration, the community can rejoice together and give thanks for God’s faithfulness. Prayer and community go hand in hand, complementing and strengthening one another. Through prayer, believers can intercede for one another, lifting each other’s needs and concerns before God. The community, in turn, can offer prayers of support and encouragement, standing in solidarity with those in need. In this way, the power of prayer is multiplied, and the bonds of community are deepened. To stay rooted in prayer and community requires intentionality and commitment. It involves setting aside time for personal prayer and reflection, as well as actively engaging in the life of a faith community. This may include participating in regular worship services, joining small groups or Bible studies, and serving alongside fellow believers in various ministries. It requires prioritizing spiritual disciplines and making an effort to cultivate relationships within the community. In a generation characterized by injustice, moral decay, and the noise of battle, finishing well as a Christian requires intentional effort and reliance on God’s Word. By seeking justice, guarding against moral decay, being a light in the noise of battle, persevering in faith, and staying rooted in prayer and community, we can make a lasting impact for the Kingdom of God. May we all commit ourselves to finishing well, bringing glory to God and spreading His love and truth in our generation. 5 thoughts on “How to finish well as a Christian”

https://faithfulhome.com.ng/how-do-you-

en

Did a 1981 Dean Koontz thriller predict the coronavirus outbreak? Readers share extracts from novel which chillingly refers to deadly viral infection named after Wuhan - Koontz novel The Eyes Of Darkness describes a killer virus named 'Wuhan-400' - The fictional virus was developed as a bioweapon in Wuhan research lab - Coronavirus first emerged from the same Chinese city in December 2019 - However there are several big differences between the novel and real life - Coronavirus symptoms: what are they and should you see a doctor? Dean Koontz wrote The Eyes Of Darkness in 1981, describing the 'Wuhan-400' virus Fans of author Dean Koontz are insisting that a novel he wrote in 1981 predicted the coronavirus outbreak. Koontz's thriller The Eyes Of Darkness describes a killer virus named 'Wuhan-400' after the Chinese city it originated in — the same city where COVID-19 was first reported. Says one character in the novel: 'They call the stuff 'Wuhan-400' because it was developed at their RDNA labs outside the city of Wuhan.' 'A Dean Koontz novel written in 1981 predicted the outbreak of the coronavirus!' wrote Twitter user Nick Hinton, who first posted a screenshot of the passage from the novel earlier this month. Koontz did not immediately respond to an inquiry from DailyMail.com about the purported prediction in his novel. Twitter user Nick Hinton kicked off a frenzy on Twitter by posting the above passage Although coronavirus was first identified in Wuhan, there is not yet scientific consensus about how and where it jumped to humans. Says one character in the novel: 'They call the stuff 'Wuhan-400' because it was developed at their RDNA labs outside the city of Wuhan' Initial theories suggested that it jumped to humans from exotic animals in a Wuhan 'wet market.' Others have suggested, so far without proof, that the pathogen may have escaped from the Wuhan Virology Lab, China's only biosafety-level four facility. Other than the city of origin, however, there is little similarity between the fictional Wuhan-400 and the real coronavirus. In The Eyes Of Darkness, Wuhan-400 is a bioweapon virus that has a fatality rate of 100 percent within 12 hours. The characters explain that the Chinese intended to use it 'to wipe out a city or a country' without the need for 'expensive decontamination'. 'Wuhan-400 is a perfect weapon. It afflicts only human beings. No other living creature can carry it. And like syphilis, Wuhan-400 can't survive outside a living human body for longer than a minute, which means it can't permanently contaminate objects or entire places the way anthrax and other virulent microorganisms can,' one character says. Coronavirus however has an estimated mortality rate of just 2 to 3 percent. It can survive on surfaces for much longer than a minute, possibly hours or days, though scientists are working now to determine such properties with more precision. In the Koontz novel, the Wuhan-400 attacks the brain. As one character describes it: 'The virus migrates to the brain stem, and there it begins secreting a toxin that literally eats away brain tissue like battery acid dissolving cheesecloth. It destroys the part of the brain that controls all of the body's automatic functions.' Coronavirus, on the other hand, primarily affects the respiratory system, in severe cases resulting in pneumonia. The primary symptoms are fever, coughing, and shortness of breath. The book also describes a virus that has an incubation period of just four hours, whereas coronavirus incubates for several days to two weeks. Finally, to the disappointment of conspiracy theorists, it turns out that in the first edition of The Eyes Of Darkness, the virus was originally called 'Gorki-400', after the Russian city where Koontz originally wrote the bioweapons lab. After the Soviet Union fell in 1991, Koontz apparently changed later editions to make China the villain. Most watched News videos - Smoke from Halen Môn smokery causes dispute with Anglesey Sea Zoo - Horrifying moment man knocks woman unconscious in Dallas - David Lammy complains of no taxpayer budget for Starmer's clothes - Barrister on former BBC presenter Huw Edwards: His sentence is a joke - Disgraced presenter Huw Edwards arrives at court for sentencing - Gisele Pelicot arrives at the criminal court in Avignon - Old clip of 56-year-old man who attempted to kill Trump resurfaces - Huw Edwards leaves court following sentencing - Starmer and Meloni giggle as they pose for photos in Villa Doria - Australian tourist 'lynched' after streaking through Italian town - Shocking moment woman repeatedly runs over handbag thief - Dominique Pelicot's lawyer: 'He asked his wife to forgive him'

https://www.dailymail.co.uk/news/article-8053063/Did-1981-Dean-Koontz-

en

What are the health benefits of pawpaw seed? In this article, we will discuss the health benefits of Pawpaw seeds. Pawpaw seeds are tiny round, black seeds located in the center of papaya fruit. They are edible and beneficial for our health if we consume them in moderation. What Are The Health Benefits Of Pawpaw Seed Below are some of the amazing health benefits of pawpaw seeds: 1. Reduces inflammation Studies have shown that pawpaw seeds can help reduce inflammation. They contain a lot of vitamin C and other anti-inflammatory substances like alkaloids and flavonoids, as well as polyphenols. This means they can help stop and reduce inflammation in conditions like gout or arthritis. 2. Natural weight management Fiber helps to maintain satiety, allowing individuals to feel full for extended periods, while healthy fats provide long-lasting energy. Furthermore, the low-calorie content of pawpaw seeds makes them an ideal snack for those looking to lose weight. 3. Cardiovascular health According to a research journal, pawpaw seeds contain soluble fiber, which helps to regulate cholesterol levels. soluble fiber attaches to cholesterol in your intestines, preventing it from being absorbed and allowing it to be eliminated from your body. According to a study, if you suffer from chronic constipation, especially those caused by bacterial infection of the intestines, it is recommended to include papaya seeds moderately in your diet as it helps kill bacteria and parasites, especially intestinal parasites that often cause chronic constipation. In this case, you can chew about 7 or 8 seeds, depending on the size. Some seeds are large, while others are small. For smaller seeds, you can take as many as 9 or 10 seeds. The seeds can be added moderately to the fruit, making it easy to add them, and can be chewed with a portion of the fruit, which is also rich in vitamin A, to further enhance its benefits. Although the fruit is known to be high in sugar, chewing the seeds in small amounts can also help to enhance insulin resistance, support diabetes, and combat diabetes. 6. Supports skin health Eating or chewing papaya seeds will give you an anti-aging effect, and the nutrients in the seeds will help support your skin and reduce the signs of aging, just like your lotion does. The seeds are packed with vitamins A and E, which help make your skin look and feel healthy. You can use papaya seed-dried oil, which is great when you soak it in coconut oil and let it dry for a few days. It makes a great body cleanser and moisturizer. 7. Immune system boost Pawpaw seeds are rich in vitamins A and C, which are known for their immunosuppressive properties. Vitamins A and C increase white blood cell production, which helps to protect the body from infections and illnesses. 8. Digestive Health Enhancement According to research, pawpaw seeds contain the papain enzyme, which plays an important role in the digestive system. It acts as a digestive aid and helps break down proteins, carbs, and fats to ensure efficient absorption of nutrients. Consuming pawpaw seeds regularly can help reduce bloating, digestive issues, and even constipation. 9. Relieve menstrual pain Pawpaw seeds may increase the frequency and intensity of menstruation. They may also help manage period pain to a certain degree. 10. Antioxidant powerhouse According to research published by E Panzarini · 2014, pawpaw seeds are rich in antioxidants. Antioxidants neutralize harmful free radicals in your body. The compounds in pawpaw seeds, such as flavonoids, phenols, and other antioxidants, reduce oxidative stress. This reduces the risk of chronic disease and cellular damage. 11. Natural detoxifier Eating Pawpaw seeds can help clear out toxins and waste in your digestive system. They contain digestive enzymes like papain, which helps clear out waste and toxins, and they’re a natural detoxifier because they have a natural cleansing effect on your body. 12. Liver health support The use of pawpaw seeds as a natural treatment for liver problems has been observed in some cultures. The liver-purifying properties of pawpaw seeds are thought to aid in detoxification and enhance liver health, according to research. However, further investigation is necessary to determine the full extent of their effects on liver health. 13. Hair Health Pawpaw seeds contain Vitamins A, C, and E which are beneficial for hair growth and maintenance. Ground pawpaw seeds can be used in hair masks or blended with regular shampoo to promote hair follicle health and reduce dandruff. 14. Good for kidney health In one animal study, the extract from pawpaw was found to be effective in reducing the risk of nephrotoxic nephrodominance caused by paracetamols in male Wistar rats. Sides Effects Of Pawpaw Seeds Medical research suggests that pawpaw seeds may have adverse effects on human fertility. It has also been suggested that it may have contraceptive properties. - Stomach upset - Intestinal discomfort - Allergic reactions - Difficulty swallowing - Liver damage (in high doses) - Poisoning (in excessive amounts) - Potential toxicity to unborn babies (in pregnant women) Pawpaw Seeds Precautions and Considerations While there are many health benefits to using pawpaw seeds, there are a few things to keep in mind: - Pregnancy and Breastfeeding: If you’re pregnant or breastfeeding, don’t eat too much pawpaw because it has compounds that can make your uterus contract. - Allergies: Pawpaw seeds contain substances that react with latex, so latex allergy may be affected by pawpaw seeds. - Quantity: Like all foods, pawpaw seeds need to be consumed in moderation. Eating too much can cause digestive issues or side effects. - Seed Preparation: Pawpaw seeds need to be cleaned and processed before they can be used in your diet. Raw or immature seeds can contain toxins, so it is important to avoid them. - Medication Interactions: It is recommended that individuals who are currently taking medications or have pre-existing health conditions consult with their healthcare provider before consuming pawpaw seeds, as they may interfere with or exacerbate certain medications or health conditions. These Pawpaw seeds, which are usually thrown away as garbage, have tons of health benefits that you should know about. They can help keep your digestive system healthy, boost your immune system, and even act as antioxidants. A Word From GetMe Treated what are the health benefits of pawpaw seed? There are many health benefits of Pawpaw seeds that are often thrown, but here are a few that are worth exploring. - Skin and hair health benefits, - Liver health support, - Natural detoxifier, - Relieve menstrual pain, - Digestive Health Enhancement, etc. However, it is important to use Pawpaw seeds sparingly and to consult a healthcare professional if you have any health issues or illnesses. Add Pawpaw seeds to your diet and add them to your beauty routine to reap the benefits of these hidden jewels. Your skin, your body, and your overall health will thank you for using the power of Pawpaw Seeds. FAQs Related To What Are The Health Benefits Of Pawpaw Seed How to use papaya seeds for health benefits? They are dried and ground into a fine powder. The powder can then be sprinkled on top of your food or added to a smoothie, salad, or other meal. Do you chew or swallow papaya seeds? They can be used directly in salads or dried. Do you have to eat papaya seeds on an empty stomach? Eating these seeds in the morning on an empty stomach reduces swelling in a short time. What are the side effects of papaya seeds? Consumption of papaya seeds has been linked to sperm loss. Is papaya good for the kidney? Yes. The potassium in the fruit plays an important role in the health of your kidneys. How many papaya seeds should I eat a day? Blend 5-6 papaya seeds and eat with food or juice. How do you prepare papaya seeds for eating? Remove the seeds from the papaya. Wash the seeds in cold running water and dry well on a tea towel before placing them on a baking tray lined with baking paper. Place the seeds on the baking tray. Place the seeds in a mortar and crush them with a pestle. Other Helpful Blog Posts: - 11 Amazing Health Benefits of Pawpaw (Carica Papaya) - What Are The Most Toxic Conventional Fruits And Vegetables - 8 Best Natural Vitamins For Menopause Symptoms - 6 Best Natural Vitamins For Sciatic Nerve Pain - Parkinson’s And Runny Nose Symptoms - 10 Surprising Health Benefits of Bitter Leaf - 20 Best Foods to Eat During Pregnancy and 10 Foods to Avoid - 15 Natural Remedies for Fibroids

https://www.getmetreated.com/2023/12/what-are-the-health-benefits-of-

en

Discover the Most Visited Tourist Attractions in the World the reasons behind their popularity and offering tips for an enriching visit. In travel, certain destinations rise to iconic status, attracting millions of visitors each year. These landmarks not only boast historical and cultural significance but also capture the imaginations of people across the globe. Criteria for Selection: Determining the most visited tourist attractions in the world involves considering factors such as cultural significance, historical importance, and widespread popularity among travelers. The chosen landmarks represent a global tapestry of awe-inspiring sites that have stood the test of time. Top 10 Most Visited Tourist Attractions in the World 1. The Great Wall of China: A Monumental Journey through Time The first on our list of the most visited tourist attractions in the world is the Great Wall of China, which stands as an unparalleled testament to human ingenuity, determination, and the grandeur of ancient civilizations. Stretching over 13,000 miles, this iconic landmark is not merely a physical barrier but a symbol of China’s rich history and cultural resilience. Historical Significance: Constructed over several dynasties, the Great Wall served as a military defense system against invasions. Initially built by Emperor Qin Shi Huang in the third century BC, subsequent rulers expanded and fortified the wall, creating the awe-inspiring structure we know today. The wall reflects not only military strategy but also the economic, political, and cultural achievements of its time. Architectural Marvel: The Great Wall’s architecture is a marvel of ancient engineering. Constructed using a variety of materials such as bricks, wood, tamped earth, and other local resources, the wall adapts to the diverse terrain it traverses, from rugged mountains to vast plains. Its watchtowers, beacon towers, and fortresses served as strategic vantage points for defense and communication. Tips for Exploring: To fully appreciate the Great Wall, it’s essential to plan your visit thoughtfully. Consider exploring different sections, each offering a unique perspective. The Badaling section, easily accessible from Beijing, provides a well-preserved glimpse into the wall’s magnificence. For a less crowded experience, venture to the Mutianyu or Jinshanling sections. Additionally, visiting during the early morning or late afternoon provides not only stunning views but also a more serene atmosphere. Best Viewing Points: While every part of the Great Wall offers breathtaking views, certain spots stand out for their scenic beauty and historical significance. Juyongguan Pass provides a picturesque setting with its lush surroundings, while Simatai offers an authentic and less-restored experience. The Wild Wall at Jiankou is favored by adventurers seeking a challenging hike and stunning vistas. The Great Wall of China is more than just a physical barrier – it’s a living testament to the tenacity of human endeavor and the endurance of cultural legacies. As you traverse its ancient stones and marvel at its sweeping landscapes, you become a part of a narrative that spans centuries. 2. The Louvre: A Majestic Tapestry of Art and History in Paris, France Nestled on the banks of the Seine River in the heart of Paris, the Louvre is one of the most visited tourist attractions in the world. it stands as a cultural beacon, drawing art enthusiasts and history lovers from around the globe. With its iconic glass pyramid and vast collection of masterpieces, the Louvre is not merely a museum; it’s a journey through time and an immersion into the world of artistic brilliance. World-Renowned Art Collections: The Louvre boasts an extensive and diverse collection that spans over 9,000 years of history. From ancient civilizations to the Renaissance, the museum houses artworks that represent various cultures and artistic movements. Visitors can gaze upon timeless classics like the Mona Lisa, the Venus de Milo, and the Winged Victory of Samothrace, each a masterpiece in its own right. Iconic Exhibits: The museum’s curatorial prowess extends beyond individual artworks, with exhibits that provide contextual richness. The Denon Wing, for example, showcases Italian paintings and sculptures, while the Richelieu Wing delves into decorative arts and French sculptures. Navigating these wings is like embarking on a curated journey through the corridors of time and human expression. Visitor Tips: Given the vastness of the Louvre, planning is key to a fulfilling visit. Start early to beat the crowds, and consider prioritizing the must-see artworks. The museum offers guided tours and interactive maps to enhance your experience. To avoid long lines, purchasing tickets in advance is advisable, and exploring during the museum’s quieter days can provide a more intimate encounter with its treasures. Navigating the Vast Museum: The Louvre’s grandeur can be overwhelming, but with strategic planning, you can make the most of your visit. Begin with the highlights in the Denon Wing, including the renowned Mona Lisa. Then, meander through the Richelieu Wing to appreciate French sculptures and decorative arts. Finally, explore the Sully Wing for a journey through ancient civilizations. The Louvre is not just a repository of art; it’s a living testament to the evolution of human creativity and expression. As you stroll through its halls, you’re surrounded by the whispers of history and the visual symphony of artistic genius. So, whether you’re an art aficionado or a casual admirer, the Louvre invites you to be a part of its majestic tapestry, where each stroke of the brush and chisel tells a story that transcends time. 3. The Pyramids of Giza: A Timeless Marvel on Egypt’s Horizon The Giza Pyramids is also one of the most visited tourist attractions in the world, tucked away on the outskirts of Cairo, are like quiet sentinels whispering tales of the grandeur and mastery of ancient Egypt. These colossal structures, built over 4,500 years ago, continue to captivate the world with their enigmatic allure, making the Giza Plateau a must-visit destination for history enthusiasts and curious travelers alike. Ancient Wonders and Cultural Importance: The Pyramids of Giza comprise three main pyramids—Khufu (Cheops), Khafre (Chephren), and Menkaure—along with the Sphinx. Built during the Fourth Dynasty of the Old Kingdom, these structures served as elaborate tombs for pharaohs and high-ranking officials. The precision with which the pyramids were constructed remains a testament to the advanced engineering skills of the ancient Egyptians. Insights into the Historical Context: Exploring the Pyramids of Giza offers a fascinating journey into the past, revealing the intricacies of ancient Egyptian beliefs and customs. Hieroglyphs and intricate carvings on the pyramid walls provide insights into the religious practices and daily lives of the Pharaohs. The Sphinx, with its lion’s body and a human head, adds a layer of mystery, inspiring countless theories and speculations. Recommendations for Guided Tours: To truly appreciate the historical significance and architectural brilliance of the Pyramids of Giza, consider joining a guided tour. Knowledgeable guides provide context, revealing the stories behind the construction and purpose of each pyramid. They can also lead you to less-explored areas, ensuring a comprehensive understanding of this ancient wonder. Planning Your Visit: To make the most of your visit, plan your trip during the cooler months, as the Egyptian sun can be intense. Begin your exploration early in the morning to avoid crowds and enjoy the mystical atmosphere as the rising sun bathes the pyramids in warm hues. Climbing inside the pyramids may require additional tickets, so check in advance and be prepared for an awe-inspiring journey through narrow passages to the burial chambers. The Pyramids of Giza stand as not just architectural marvels but as symbols of human ambition and the quest for immortality. As you stand before these ancient wonders, you’re transported back in time, marveling at the ingenuity of those who sculpted these colossal structures from the golden sands of Egypt. The Pyramids of Giza remain an eternal testament to the enduring legacy of one of the world’s greatest civilizations. 4. Machu Picchu: A Pinnacle of Incan Ingenuity and Mystical Beauty in Peru High in the Andes Mountains, nestled amidst lush green peaks and steeped in mist, Machu Picchu is among the most visited tourist attractions in the world, it stands as an archaeological marvel and a testament to the advanced engineering prowess of the ancient Inca civilization. This UNESCO World Heritage Site, often referred to as the “Lost City of the Incas,” continues to captivate the world with its breathtaking beauty and enigmatic aura. Incan Ruins and Breathtaking Mountain Landscapes: Machu Picchu, built in the 15th century by the Inca emperor Pachacuti, is a testament to the architectural and urban planning skills of the Inca people. The site comprises intricate stone structures, terraced fields, and ceremonial plazas, all harmoniously integrated into the natural landscape. Surrounded by cliffs and towering peaks, Machu Picchu offers awe-inspiring views of the Andes Mountains. Planning Recommendations for a Memorable Visit: To ensure a memorable visit to Machu Picchu, it’s essential to plan. Begin by obtaining permits, as there are daily visitor limits to preserve the site’s integrity. The classic Inca Trail offers a scenic approach for those seeking a trekking adventure, while alternative routes like the Salkantay or Lares treks provide diverse landscapes. Arrive early to witness the sunrise over the site, casting a golden glow on the ancient stones. Exploring the Ancient Wonder: Once at Machu Picchu, take your time exploring the various sections. The agricultural terraces showcase the Inca’s mastery of farming at high altitudes, while the Intihuatana stone serves as a celestial clock. The Temple of the Sun and Room of the Three Windows highlight the advanced Incan stonework and architectural precision. Engaging a knowledgeable guide adds depth to your experience, unraveling the mysteries of this ancient citadel. Preserving Machu Picchu’s Heritage: As you wander through this mystical site, remember the importance of responsible tourism. Follow designated trails, adhere to ethical guidelines, and respect the preservation efforts in place. Machu Picchu’s fragile ecosystem and cultural significance deserve our collective efforts to ensure its preservation for future generations. Machu Picchu isn’t just a destination; it’s a pilgrimage into the heart of Incan history and the natural beauty of the Andes. As you stand amidst the ancient stones, you can almost feel the echoes of a bygone era, when the Inca people lived in harmony with their surroundings. Machu Picchu, with its ethereal charm, remains an eternal symbol of human achievement, inviting modern explorers to connect with the spirit of the past in the embrace of Peru’s mountainous landscapes. 5. The Statue of Liberty: Symbolizing Freedom and Welcoming the World in New York City, USA Standing tall and proud in New York Harbor is another most visited tourist attractions in the world, the Statue of Liberty has been an enduring symbol of freedom, democracy, and the American dream for over a century. This iconic statue, a gift from France to the United States, has become an emblematic representation of liberty and the promise of a better life for countless immigrants arriving on American shores. Symbolic Significance and Historical Background: The Statue of Liberty, officially named “Liberty Enlightening the World,” was dedicated on October 28, 1886. Designed by French sculptor Frédéric Auguste Bartholdi, the statue was a joint effort between France and the United States to celebrate the centennial of American independence. Lady Liberty, with her torch held high and the tablet inscribed with the date of the Declaration of Independence, serves as a beacon of hope and a reminder of shared values. Guided Tours and Ticket Reservations: To truly appreciate the Statue of Liberty’s grandeur and historical importance, consider taking a guided tour. Guided tours offer insightful commentary on the statue’s construction, its symbolism, and the significance of Ellis Island as the gateway for millions of immigrants. Booking tickets in advance is advisable, particularly if you plan to visit the pedestal or crown, as access is limited and can sell out quickly. Magical Atmosphere and Spectacular Views: The experience of approaching the Statue of Liberty by ferry is magical. As you sail across New York Harbor, the statue gradually comes into view, standing tall against the backdrop of the Manhattan skyline. Visiting at different times of the day can offer unique perspectives, from the warm glow of sunrise to the sparkling city lights at night. The panoramic views from the pedestal or crown provide a breathtaking vantage point of the harbor and beyond. Visitor Tips and Practical Information: When planning your visit, it’s important to consider practical aspects. The ferry departs from Battery Park in Manhattan, and security measures are in place, so allow sufficient time for screening. Wear comfortable shoes, as there may be some walking involved, and be prepared for varying weather conditions. Exploring nearby attractions like Ellis Island or enjoying a picnic in Liberty Island’s park adds to the overall experience. The Statue of Liberty remains an enduring symbol of the values that the United States holds dear – freedom, opportunity, and the pursuit of a better life. As you stand in the shadow of Lady Liberty, you can’t help but be moved by the powerful symbolism and the profound impact this iconic statue has had on generations of Americans and visitors alike. 6. The Vatican City and St. Peter’s Basilica: A Spiritual Odyssey Amidst Artistic Grandeur Located in the center of Rome, the Vatican City is home to numerous religious and artistic treasures and is considered the spiritual core of Catholicism. At its heart lies St. Peter’s Basilica, a breathtaking masterpiece that seamlessly blends faith, history, and architectural brilliance one of the most visited tourist attractions in the world. Spiritual and Cultural Importance: The Vatican City, an independent city-state surrounded by Rome, is the smallest sovereign state globally, yet it holds immense spiritual and cultural significance. Home to the Pope and the central governing body of the Catholic Church, the Vatican welcomes millions of pilgrims and tourists each year. St. Peter’s Basilica, its grand centerpiece, stands as one of the most renowned and revered religious structures in the world. Exploring the Vatican Museums and St. Peter’s Square: Begin your journey through the Vatican City with a visit to the Vatican Museums, housing an unparalleled collection of art amassed by various popes throughout the centuries. Marvel at the Sistine Chapel, adorned with Michelangelo’s iconic frescoes, and wander through rooms adorned with Renaissance masterpieces. Stroll through the magnificence of St. Peter’s Square, designed by Gian Lorenzo Bernini, and absorb the harmonious blend of spirituality and artistic brilliance. Tips for Navigating St. Peter’s Basilica: St. Peter’s Basilica, with its massive dome dominating the skyline, is a crowning jewel of the Vatican. Consider coming early to avoid long lines and make the most of your stay. Climbing to the top of the dome provides not only panoramic views of the Vatican City but also a closer look at Michelangelo’s intricate design. Admire the awe-inspiring Pieta by Michelangelo and the stunning Bernini’s baldachin beneath the dome. Visitor Recommendations and Etiquette: Respectful attire is essential when visiting the Vatican, with shoulders and knees covered as a sign of reverence. Guided tours are available to provide historical context and insights into the art and architecture. Be aware of the Vatican’s opening hours, as it can get crowded, and consider visiting during quieter times for a more serene experience. The Vatican City and St. Peter’s Basilica are not just religious landmarks but also repositories of unparalleled artistic treasures. As you stand within the hallowed halls, you’re immersed in a world where faith and art converge, creating an atmosphere that transcends time. The Vatican remains a pilgrimage for believers and a source of inspiration for admirers of art and history, inviting all to partake in its spiritual odyssey. 7. The Eiffel Tower: Parisian Icon and Architectural Splendor Gracefully dominating the Parisian skyline, the Eiffel Tower stands as a testament to architectural ingenuity, a symbol of romance, and an enduring icon of Paris, France. From its intricate iron lattice design to its panoramic views of the City of Light, the Eiffel Tower captivates millions of visitors each year with its charm and allure.it is one of the most visited tourist attractions in the world. Iconic Symbol of Paris and Architectural Masterpiece: Completed in 1889 as the entrance arch to the 1889 World’s Fair, the Eiffel Tower was initially met with mixed reactions. Yet, over time, it evolved into a beloved symbol of Paris and a remarkable feat of engineering. Designed by Gustave Eiffel, the tower’s intricate lattice structure showcases the marriage of form and function, creating an aesthetic marvel that has withstood the test of time. The Best Times to Visit and Tips for Avoiding Crowds: To fully appreciate the Eiffel Tower, timing is key. The early morning and late evening provide a magical backdrop as the sun bathes the iron structure in warm hues. Consider visiting during the weekdays or the off-season to avoid the crowds. Planning a picnic in the nearby Champ de Mars or along the Seine River allows for a leisurely experience beneath the tower’s elegant silhouette. Vibrant Surroundings and Nearby Attractions: The Eiffel Tower is not merely a standalone attraction; it is the focal point of a vibrant neighborhood. Explore the Trocadéro Gardens for stunning views and fantastic photo opportunities. Stroll along the Seine River, enjoying the picturesque scenery. The nearby Musée du Quai Branly and Musée de l’Homme provide cultural enrichment, adding depth to your Parisian adventure. Engaging with the Eiffel Tower: Climbing to the top of the Eiffel Tower offers unparalleled views of Paris. While the elevators provide a convenient ascent, the more adventurous can tackle the stairs for a rewarding journey. The various levels house shops, cafes, and even a champagne bar, allowing visitors to savor the experience and toast to the City of Light. The Eiffel Tower is not just a structure; it’s a cultural icon that embodies the essence of Paris. As it illuminates the night sky, casting its glow across the city, the Eiffel Tower invites visitors to become a part of its legacy. Whether it’s a romantic evening, a family outing, or a solo adventure, the Eiffel Tower stands as a beacon, beckoning all to experience the magic of Parisian elegance and architectural splendor. 8. The Taj Mahal: A Timeless Ode to Love and Architectural Grandeur in Agra, India Nestled on the banks of the Yamuna River in Agra, India, the Taj Mahal stands as a testament to the enduring power of love and the pinnacle of architectural beauty. This iconic mausoleum, recognized as one of the New Seven Wonders of the World, captivates the world with its pristine white marble, intricate details, and the poignant story that inspired its creation. Testament to Love and Mughal Architecture: Commissioned by the Mughal Emperor Shah Jahan in memory of his beloved wife Mumtaz Mahal, the Taj Mahal is a masterpiece of Mughal architecture. Completed in 1653, it harmoniously blends Persian, Ottoman, Indian, and Islamic architectural styles. The symmetrical layout, intricate carvings, and the mesmerizing use of white marble contribute to its unparalleled aesthetic appeal. Visitor Tips for an Enriching Experience: To make the most of your visit to the Taj Mahal, consider arriving early in the morning to witness the soft glow of sunrise bathing the marble façade. The changing colors throughout the day and at sunset add to the magical ambiance. While exploring the complex, take time to appreciate the exquisite details, including the delicate marble inlays and the intricate calligraphy that adorns the structure. Guided Tours and Historical Insights: Engaging a knowledgeable guide can enhance your experience, providing historical context and unraveling the stories behind the Taj Mahal’s construction. Guides can shed light on the symbolism embedded in the architecture, from the reflective pools representing paradise to the use of precious stones in intricate patterns. Preservation Efforts and Responsible Tourism: Recognizing the need for conservation, the Indian government has implemented measures to protect the Taj Mahal. Visitors are encouraged to adhere to guidelines to ensure the site’s preservation. The Taj Mahal is closed on Fridays, and stringent security measures are in place to protect this cultural gem. Embracing the Mystique of the Taj Mahal: As you stand before the Taj Mahal, you become part of a timeless narrative that transcends centuries. The tranquil gardens, the serene reflection pools, and the ethereal beauty of the marble structure create an atmosphere that evokes a sense of awe and reverence. The Taj Mahal invites all who visit to embrace its mystique, marvel at the craftsmanship that went into its creation, and appreciate the enduring power of love etched into its very foundations. 9. Disneyland Park, Anaheim: The Happiest Place on Earth Nestled in sunny Anaheim, California, Disneyland Park stands as a beacon of joy, enchantment, and childhood magic. Since its opening in 1955, this iconic theme park has been synonymous with wonder, imagination, and the promise of creating timeless memories for visitors of all ages. Magical Experiences and Family-Friendly Attractions: Disneyland Park, often dubbed “The Happiest Place on Earth,” is a playground of enchantment where fairy tales come to life. From the moment you step onto Main Street, U.S.A., with its nostalgic charm, to the far reaches of Adventureland and Tomorrowland, the park is a tapestry of magical experiences. Encounter beloved Disney characters, embark on thrilling rides, and immerse yourself in the whimsical atmosphere that defines the Disney legacy. Planning Tips for a Seamless Visit: To ensure a seamless and enjoyable visit to Disneyland, strategic planning is essential. Consider utilizing the Disneyland app for real-time updates on ride wait times, show schedules, and dining options. Arrive early to maximize your time in the park and take advantage of the FastPass system, which allows you to reserve access to select attractions and minimize wait times. Embracing the Disney Spirit: Disneyland Park is not merely a collection of attractions; it’s a celebration of storytelling, creativity, and the enduring spirit of Walt Disney’s vision. Be sure to catch the iconic parades, live shows, and nighttime spectaculars that add an extra layer of magic to your visit. The nightly fireworks display over Sleeping Beauty Castle is a must-see, casting a dazzling spectacle across the sky. Delightful Dining and Character Encounters: Disneyland is a culinary adventure in itself, offering a diverse range of dining experiences. Indulge in Mickey-shaped treats, sample international cuisine, and dine with your favorite characters at themed restaurants. Character meet-and-greets provide the perfect opportunity for photos and personal interactions with beloved Disney figures. Creating Lasting Memories: Whether you’re visiting with family, and friends, or experiencing the magic solo, Disneyland Park invites everyone to become a part of its enchanting narrative. From classic attractions like “it’s a small world” to the exhilarating thrills of Space Mountain, each moment is an opportunity to create lasting memories that will be cherished for a lifetime. Disneyland Park isn’t just an amusement park it is one of the most visited tourist attractions in the world; it’s a timeless destination where dreams take flight and imagination knows no bounds. As you step through its iconic gates, you’re transported to a world where fantasy becomes reality, and the magic of Disney weaves its spell on all who enter. 10. The Colosseum: An Icon of Ancient Rome’s Grandeur and Gladiatorial Legacy The last on our list of the most visited tourist attractions in the world is the Colosseum. Standing proudly at the heart of Rome, Italy, the Colosseum is a colossal testament to the architectural prowess and cultural significance of ancient Rome. This iconic amphitheater, also known as the Flavian Amphitheatre, has withstood the tests of time, inviting visitors to delve into the world of gladiatorial combat and the splendor of Roman entertainment. Ancient Amphitheater and Symbol of Roman Engineering: Built under the Roman emperors Vespasian and Titus in the 1st century AD, the Colosseum is an architectural marvel that once hosted grand spectacles, including gladiator contests, animal hunts, and mock sea battles. Its elliptical design, towering arches, and capacity to hold up to 80,000 spectators reflect the ingenuity of Roman engineering and construction techniques. Guided Tours and Exploring the Colosseum’s History: Embarking on a guided tour of the Colosseum provides a deeper understanding of its historical context. Knowledgeable guides unravel tales of gladiators’ bravery, recount the engineering marvels behind the arena, and delve into the cultural significance of the games. Exploring the underground chambers, where gladiators and wild animals awaited their turns, adds a layer of intrigue to the experience. Visiting the Arch of Constantine and Roman Forum: Adjacent to the Colosseum lies the Arch of Constantine, a triumphal arch celebrating Emperor Constantine’s victory. Visitors can take a stroll to the nearby Roman Forum, once the bustling center of ancient Roman life. The ruins of temples, basilicas, and government buildings paint a vivid picture of the city’s former glory. Preservation Efforts and Cultural Heritage: Recognized as a UNESCO World Heritage Site, the Colosseum is a symbol of global cultural heritage. Preservation efforts aim to protect and restore the monument, ensuring future generations can marvel at its grandeur. Visitors are encouraged to respect the site’s historical significance and contribute to its conservation by following designated pathways and guidelines. Embracing the Timeless Legacy: As you stand within the towering walls of the Colosseum, you’re transported back in time to an era of grandeur, spectacle, and cultural richness. The amphitheater, once the epicenter of Roman entertainment, continues to inspire awe and admiration. It stands not only as a symbol of ancient Rome’s architectural brilliance but also as a testament to the enduring legacy of a civilization that shaped the course of history. As we conclude our journey through the “10 Most Visited Tourist Attractions in the World,” it becomes evident that these landmarks are more than just places to visit – they are gateways to history, culture, and human achievement. Whether you’re drawn to the ancient wonders of Egypt, the artistic treasures of the Louvre, or the modern magic of Disneyland, each attraction promises an unforgettable experience. So, pack your bags, embrace the wonder, and explore these iconic sites that have captured the hearts of millions worldwide. Happy travels!

https://tourtanggo.com/10-most-visited-tourist-attractions-in-the-

en

MORE evidence smoking may cut the risk of coronavirus: Review of 28 studies shows number of smokers among hospitalised patients is 'lower than expected' as expert admits the mounting findings are 'weird' - UCL reviewed 28 studies from China, US, France, South Korea and the UK - It found smokers were less common than expected among COVID-19 patients - Researchers said there data on smoking is not to a high standard and has holes - But it's not the first time the unexpected link has been spotted by scientists - One expert said 'something weird is going on with smoking and coronavirus' - Here’s how to help people impacted by Covid-19 A review of scientific studies has added more evidence to the claim that people who smoke might have a lower risk of becoming seriously ill with COVID-19. University College London academics looked at 28 papers and found the proportions of smokers among hospital patients were 'lower than expected'. One public health professor said there was 'something weird going on with smoking and coronavirus' and experts are struggling to explain the connection. One of the studies showed that in the UK the proportion of smokers among COVID-19 patients was just five per cent, a third of the national rate of 14.4 per cent. When smokers do get diagnosed with the virus, however, they appear to be more likely to get so sick that they need ventilation, two studies in the review showed. Researchers admit that hospitals are probably not recording patients' smoking status properly, potentially because they are too busy, patients are too sick to answer, or because people lie in their answers. But they are struggling to knock down mounting evidence suggesting an apparent protective effect given by cigarettes, which one expert today admitted was 'weird'. A review of five early studies on the topic last month made the exact same conclusions - that smokers may avoid serious infection, but their outlook is worse if they do. University of College London reviewed 28 studies and found smoking rates were lower than expected among COVID-19 patients. The graph shows the smoking rate of each country against the percentage of smokers among COVID-19 patients. The lowest figure has been chosen for each country to show the stark comparison discovered by some studies The team are not the first to suggest smokers may be protected by their habit, after a slew of studies have spotted the unexpected link (stock image) Two of the authors on the recent UCL review received research grants from smoking cessation lobbies. Their paper was titled 'The association of smoking status with SARS-CoV-2 infection, hospitalisation and mortality from COVID-19: A living rapid evidence review' and was published on the study-sharing website Qeios. David Simons and colleagues looked at 28 studies involving more than 23,000 people. Twenty-two of the studies were conducted in China, three in the US, one in South Korea, one in France and one was an international study using mostly UK data. Only three of them split smoking status into three parts - current, former and never smokers. The other 25 only reported current and former smoking status, but there were questions around how many of the rest had never smoked, and how many had missing data. 'Notwithstanding these uncertainties, compared with national prevalence estimates, recorded current and former smoking rates in the included studies were generally lower than expected,' the study authors wrote. Data from the US suggests that smokers appear to be less likely to test positive for SARS-CoV-2 compared with never smokers. Rather than this reflecting likelihood of catching the virus in the first place, it is more likely to point to someone's risk of becoming so ill they have to go to hospital. Most of the countries involved in the studies did almost all of their testing in hospitals. But the researchers noted that smokers were more likely to be tested, possibly because their symptoms, like a cough, are more obvious due to their habit. 'We would therefore caution against drawing any conclusion as to whether smokers are at increased risk of SARS-CoV-2 infection at this early stage,' the UCL team said. Two high quality studies provided zero evidence that the 657 current or former smokers with the virus were at a higher risk of ending up in hospital. But among 1,370 people hospitalised across two other studies, smokers were 43 per cent more likely to see their disease progress to become severe than those who had never smoked. Three studies reported death rates from COVID-19 but there 'did not appear to be a notable difference' between smokers and non-smokers. However, the studies 'did not explicitly state never smoking status', the authors said. They implied that patients who died may have smoked in the past, but this was not clearly recorded by a doctor. The authors concluded there is a lack of evidence that meets a high standard to definitely say whether or not smokers are at higher risk of catching the coronavirus, or having poor outcomes. Data from the US suggests that smokers appear to be less likely to test positive for SARS-CoV-2 compared with never smokers. But the researchers noted that smokers were more likely to be tested - possibly because their symptoms are more obvious Three studies looked at hospitalisation for COVID-19 by smoking status. An analysis of two of these studies provided zero evidence that the 657 current or former smokers with the virus were at a higher risk of ending up in hospital Among 1,370 people hospitalised across two other studies, smokers were 43 per cent more likely to see their disease progress than those who had never smoked Three studies reported death rates from COVID-19 but there 'did not appear to be a notable difference' between smokers and non-smokers Commenting on the matter, Linda Bauld, a professor of public health at the University of Edinburgh, said 'there's something weird going on with smoking and coronavirus'. She told Good Morning Britain: 'We know for decades that smoking is linked to a higher risk of developing respiratory conditions and also people who smoke have poorer outcomes. 'And we've still got around seven million smokers in the UK, [the] leading preventable cause of death. 'However, my colleagues at UCL... what they’ve found is there are surprisingly few smokers in those studies who’ve developed coronavirus. 'In one French study, four times as many non-smokers got the virus and developed COVID-19 compared to smokers. 'There is a potential biological explanation for this.' Professor Bauld said the way the virus enters the body may be blocked by effects of nicotine - the addictive compound found in tobacco. The coronavirus enters cells inside the body via structures called ACE-2 receptors, which coat the surface of some cells, including in the airways and lungs. The numbers of ACE-2 receptors someone has are thought to vary depending on genetics and some evidence suggests that they are higher in smokers. This could, in theory, put them at a higher risk of contracting the coronavirus. However, the virus is known to cause lung damage by depleting the numbers of ACE-2 receptors, so the fact that smoking increases them could reverse the effect and prevent harm to the lungs. On the other hand, other studies show that nicotine reduces the action of the ACE-2 receptor, suggesting smokers are less likely to catch the virus in the first place. Professor Bauld said: 'It's plausible that smokers are less likely to develop the condition potentially because of nicotine. Importantly in that UCL review where smokers did develop COVID-19, their outcomes are far worse.' A leading infectious disease expert at University College London, Professor Francois Balloux, has also previously said there is 'bizarrely strong' evidence smoking may be protective What did the studies from each country show? The studies conducted in hospitals in China showed that 3.8 to 17.6 per cent of COVID-19 patients were current smokers and fewer than five per cent were former smokers. However, 2018 data shows more than half the population of the country are current smokers (50.5 per cent of men and 2.1 per cent of women). And almost one in 10 of non-smokers in China are former smokers (8.4 per cent of men and 0.8 per of women). In the US studies, 1.3 to 27.2 per cent were current smokers, in contrast to a smoking prevalence of 13.8 per cent in 2018. And 2.3 to 30.6 per cent were former smokers, compared with the 20.9 per cent of former smokers across the states. In the South Korean study, 18.5 per cent were current smokers, which almost matches the smoking prevalence of 19.3 per cent in 2016. In the included study conducted in France, 7.1 per cent were current smokers, 6.1 per cent of whom were hospitalised. But much higher smoking rates are recorded in the population - 32 per cent. However the results were different for former smokers, of which there are 31.4 per cent in France. A much higher 59.1 per cent of COVID-19 patients were former smokers. In the international study with participants predominantly from the UK in a hospital setting, five per cent were current or former smokers. This compares with a current and former smoking prevalence of 14.4 and 25.8 per cent in England in 2018, 'suggesting a lower than expected proportion of current and former smokers in the included study'. Typically, smokers are at a heightened risk of infection because the tiny hairs inside the airways and lungs, which help move pathogens and mucus away, are often damaged by the toxic chemicals in cigarette smoke. In theory, this would put smokers at a disadvantage if they catch coronavirus, considering the disease leaves patients unable to get enough oxygen into the bloodstream due to lung inflammation. A group of studies from China found that the average proportion of coronavirus patients who were classed as smokers - from a total of almost 6,000 people - was just 6.5 per cent. For comparison, more than 26 per cent of the country's population as a whole are smokers The largest study which analyses health profiles of patients is published in the New England Journal of Medicine: Of the 173 patients who had severe symptoms, 16.9 per cent of them were current smokers and 5.2 per cent had previously smoked. In comparison, of the patients with less-severe symptoms, 11.8 per cent were current smokers and 1.3 per cent were former smokers Researchers at the Zhongnan Hospital of Wuhan University made the conclusion that only 1.4 per cent of 140 hospitalised patients were smokers A study of 41 patients found that none of the 13 patients who needed to be admitted to ICU were current smokers. In contrast, 11 per cent (three) of those who did not need intensive care were smokers One study of 140 coronavirus patients found that among the 58 patients who severely ill, 3.4 per cent (two people) were current smokers and 6.9 per cent (four) were former smokers. In comparison, of the 82 with milder symptoms, none were current smokers and 3.7 per cent (three) were former smokers Research has shown smokers do face a greater risk of suffering complications - but others suggested they were less likely to be infected in the first place. That was the finding of the first large review of evidence by a team led by Harvard's Dr Constantine Vardavas, Greece, published in the journal Tobacco Induced Diseases. The team reviewed five studies in March and said so far say the proof smoking raises the risk of coronavirus is limited, after finding as little as 1.4 per cent of hospitalised patients were smokers. The group of experts even admitted warnings made by health chiefs were based mainly on assumptions, given the known infection risks of smoking. A study published earlier this month by scientists in New York and Athens looked at 13 Chinese studies that had registered smoking as a precondition and found that the number of smokers across the whole sample of 5,300 patients was 6.5 per cent. It's an astonishingly small number in country where half of all men still smoke. Another study, by America's Centers for Disease Control of over 7,000 people who tested positive for coronavirus, found that just 1.3 per cent of them were smokers - against the 14 per cent of all Americans that the CDC says smoke. The study also found that the smokers stood no greater chance of ending up in hospital or an ICU. Governments in both the UK and US urge people to stop smoking to protect themselves from the virus as a matter of precaution, while scientists admit there is no clear proof cigarettes can worsen the disease. Recently, world-famous artist David Hockney wrote a letter to the Daily Mail saying: 'I used to joke that being a smoker in Malibu was the equivalent of being a non-smoker in Pasadena. They used to have very bad pollution there. 'Could it not be that smokers have developed an immune system to this virus? With all these figures coming out, it’s beginning to look like that to me.' The British artist, now 82 and living in France, adds 'I'm serious' and has in the past revealed he's smoked for more than 60 years but still considers himself healthy. Meanwhile, a British NHS doctor claimed today that Prime Minister Boris Johnson was so badly affected by coronavirus because he is 'significantly' overweight. Consultant cardiologist Dr Aseem Malhotra said there is a ten-fold risk of death from the disease - which has so far killed more than 20,000 Britons - if patients are obese. He pointed out that other 'slimmer' members of the Cabinet - like Health Secretary Matt Hancock - recovered much more quickly and were not hospitalised. Other top Government officials and advisers who have recovered from the virus include Chief Medical Officer Chris Whitty, Chief Adviser Dominic Cummings and Health Minister Nadine Dorries. Mr Johnson, 55, has long struggled with his weight and in 2018 revealed he weighed almost 16 and a half stone, which at 5ft 9in puts him in the high risk category. Dr Malhotra said: 'It was obviously very concerning for the whole nation to see our Prime Minister get admitted to hospital with COVID-19. 'Now it is an observation, but it does fit with the evidence, Boris unfortunately is significantly overweight. 'I used to speak with one of his very senior advisers when he was London Mayor a few years ago who expressed to me personally concerns about his weight.' Most watched News videos - Smoke from Halen Môn smokery causes dispute with Anglesey Sea Zoo - Australian tourist 'lynched' after streaking through Italian town - Disgraced presenter Huw Edwards arrives at court for sentencing - Old clip of 56-year-old man who attempted to kill Trump resurfaces - Barrister on former BBC presenter Huw Edwards: His sentence is a joke - Dame Angela Eagle dodges questions on PM's luxury glasses habit - David Lammy complains of no taxpayer budget for Starmer's clothes - Gisele Pelicot arrives at the criminal court in Avignon - Huw Edwards leaves court following sentencing - Starmer and Meloni giggle as they pose for photos in Villa Doria - Scene after pagers explode and wound hundreds of Hezbollah fighters - Dominique Pelicot's lawyer: 'He asked his wife to forgive him'

https://www.dailymail.co.uk/news/article-8264635/More-proof-

en

Former Anambra State governor, Mr. Peter Obi has said Nigerians should celebrate the sacrifices of women in keeping the family front strong and contributing immensely to national progress and development. Noting that Nigeria is only behind India, a country seven times our population, in maternal deaths globally, he expressed worry that over 50 million women live in extreme poverty. Obi in his X on Sunday, said: “I like to use the chance provided by one of the Mothers Day celebrations to salute and honour Nigerian mothers. “They play a very vital role in shaping the citizens of our nation. From procreation through early child formation and to adulthood, Mothers play very inestimable roles in the lives of the citizens and nation-building. “Today, therefore, presents us with another golden opportunity to celebrate them for their motherly love and their many sacrifices both in keeping the family front strong and contributing immensely to national progress and development. “Our mothers have remained the source of strength, the symbol of peace and togetherness, the guiding light and beacon of hope to us both in the families and in the larger societies. “With our nation going through very difficult times, fighting extreme hunger and starvation, mothers seem to be the most hit as they bear the brunt of keeping the home front. “Reports by the World Bank and the International Monetary Fund show that women constitute over 60 percent of the poorest people in Nigeria and going by the IMF statistics that Nigeria has about 90 million people in extreme poverty, over 50 million women are in extreme poverty. “Reports show that Nigeria is only behind India, a country seven times our population, in maternal deaths globally. “The United Nations Economic Commission for Africa says that one in seven global maternal deaths occurs in Nigeria. “Therefore, in celebrating our mothers today, Nigeria must commit itself to critical areas of human development being; heath, which will reverse our poor health facilities and reduce our maternal mortality, education, which will ensure that our young girls who will eventually become mothers are properly educated; and pulling people out of poverty, especially our women, which is critical to celebrating our mothers today. “Women have been shown to contribute more in the fight against poverty. Examples abound in many Asian countries like Bangladesh where women are the engine of poverty eradication. As we maintain, a new Nigeria is possible,” he added.

https://frontiernewsng.com/mothers-day-we-must-celebrate-our-

en

Summer is winding down and before you know it, you and your child/ren will be transitioning to the start of a new school year; a new class. Resuming a new class for some kids can mean fear, anxiety, and uncertainty. To help your child mentally prepare for the new class and get the best of it, here are six tips that will help. 1. Establish And Start School-day Routines Early Routines are important for school children of all ages. They. amongst other things, foster predictability, control, and independence. With the long break often being less demanding for students, it can offer a break from previously established routines. However, as a new class brings increased responsibilities, re-establishing important routines becomes vital. Establishing a morning routine that fosters a peaceful start to the day is as important as an afternoon routine that incorporates homework, activities, preparing for the next day, and appropriate bedtimes. Routines are important for helping your child be successful with the start of a new level. If your child is of mature age, consider carrying them along in the development of a new routine. For a young child, use a chart with pictures or stickers to map out the day. If chores or homework are a part of it, you can use rewards to reinforce positive behaviour and achievement. For adolescents/teens, you can encourage their independence by helping them use a calendar or daily planner, set out their clothes, pack their own lunch or set their alarm for the morning. This will help them build more independence as well as ease their anxiety about returning to school. Also important is that they give the routine a trial run the week before school resumes. Doing so will help acclimate your child to the new routine and ease the transition prior to the first day of school. 2. Encourage Open Communication For many children, a new class year can be anxiety-provoking. It is common if they’ve had learning challenges, poor peer relationships, or experienced bullying in the past. This is why having someone to talk to is critical for children and teens as they navigate a resumption into a higher class. Don’t be afraid to talk squarely with your children about their feelings. These emotions are real. Acknowledge them, and normalise such conversations so your child knows that sharing their feelings is okay. Daily family check-ins can be a great way to establish a healthy routine for you to check-in with your child to see how they are doing. These quick conversations can be in the car on the way home, at dinner, or right before bed. If need be, you can also reach out to the school counselor or therapist for aid. 3. Be Involved Parent involvement at school is not the only key to a successful new class resumption, it is important for your child’s success throughout the school year as well. Engage with your child’s teacher beyond PTA and official matters. Connect with them, get their phone numbers and let them know that you value open communication with them. Not only will this ease any concerns you may have as a parent, but will help your child settle in better. Student involvement is also essential. Kids tend to feel alone if they are in a new grade, school, or environment. Encourage yours to explore extracurricular activities such as sports, music, or after-school clubs. Kids (especially older ones) who are involved in beyond the classroom activities often find ways to positively invest their time and build strong adult and peer relationships, as well as their own sense of self-confidence. 4. Incorporate positive reinforcement If your child is nervous about resuming a new class back to school or starting a new class, it means they’ll likely find it tough to adapt or focus on the positive things they are doing. Bear in mind that most mindset change comes through reinforcing the positive things your child does. Therefore, you’re to find ways to praise your child throughout the day for speaking appropriately, making the right choices, or handling their responsibilities. Consider setting up a reward chart or other type of goal-directed activity for positive behaviour that you can build on throughout the school year as responsibilities increase. And “no”, rewards do not have to be monetary. A thirty-minute extension of their screen time on Saturdays can well serve this purpose. 5. Maintain An Optimistic Outlook Transitions can be tough. Transitioning to a new class and school routine can be even more difficult. It could be so if your child had a difficult year the year before. For, you, summer would have been a much-needed break from a school year of timelines and struggles. Granted, keeping an optimistic attitude can be a challenge, but since children, and your child is tuned into you as their parent and will often follow your lead. Invest in self-care activities to help you to focus on the positive things a new class brings and share those positive messages with your child as they start a new academic year. 6. Set out and Set Up a Study Space Set out and set up a study space ahead of time, and start observing study hours as you would as soon as school resumes. When your child/ren comes home from the classroom, it’s homework time. Creating a designated homework space in the home will ensure this time is as productive and efficient as possible. Have You Read: Help! My Child Doesn’t Want To Go Back To School If you have space constraints and cannot dedicate an entire room to ‘studying’, the dining table or in a corner of the family room may be the perfect space. Stock the homework station with necessary supplies like pencils, crayons, paper, scissors, and glue sticks. Also ensure there is proper lighting and a comfortable chair to make the time in that space as pleasant as possible. Older kids may appreciate their own whiteboard or bulletin board to post homework assignments and reminders about upcoming tests and projects. Also, they might prefer to study in a quiet spot like a bedroom or office might prefer to study in a quiet spot like a bedroom or office. Find more resources on parenting here.

https://fabmumng.com/how-to-prepare-your-

en

What are the Most Painful Surgeries It is not always possible to prevent pain during or after an operation. Although some discomfort may be inevitable, a doctor will work with other specialists, such as an anesthesiologist, to manage a person’s pain. It is essential to remember that everyone is different. Some people may find a particular surgery very painful, while others do not. For this reason, it is difficult to rank surgeries from most to least painful. If many people report feeling pain from one type of operation, it might be considered a particularly painful surgery. Major surgery is not always more painful than a minor operation, which may be due to the type and amount of pain medication given to an individual. A person should speak to their doctor and ask plenty of questions when considering surgery. A doctor can help ease their concerns about pain and recommend ways to reduce post-surgery discomfort. Knowing which surgeries are considered particularly painful can help a person know what to expect. But this is only a guide because of the way individuals feel pain. Most painful surgeries Surgeries involving the bones tend to cause more pain than other types. In general, research has found that orthopedic surgeries, or those involving bones, are the most painful. However, researchers also found that some minor surgeries or those classed as keyhole or laparoscopic, could also cause significant pain. Regardless of the type of surgery, a person should speak to a doctor about the procedure and a plan to manage any discomfort. It is also helpful to relate any past experiences with pain medications, as some people are more or less sensitive to these drugs. Here, we outline what is considered to be five of the most painful surgeries: 1. Open surgery on the heel bone If a person fractures their heel bone, they may need surgery. An operation is not always necessary if the bone has not moved too far out of place. To repair the fracture, a surgeon must cut into the skin to get to the broken bone. They can then fix the bone back together using plates or screws. The skin around the heel is thin, and this area does not have a lot of soft tissue. It is easy to damage the nerves around the heel bone during surgery. Along with the attachment of screws to the bone, this can make the operation and recovery painful. 2. Spinal fusion The bones that make up the spine are known as vertebrae. Scoliosis and degenerative disc disease are among the medical problems that may affect the vertebrae. If movement between vertebrae is causing pain, a doctor may recommend spinal fusion surgery. This process connects two or more vertebrae to stop them from moving against each other. Sometimes, surgery will involve a bone graft. This is when the bone is taken from the hip and put into the spine to help the vertebrae fuse. Bone grafts may cause significant and even chronic pain following surgery. A myomectomy may be required to remove large fibroids from the uterus. A myomectomy is an operation to remove fibroids from the uterus. Although these muscle fibers are almost always harmless, they can be a cause of infertility. The operation is usually done using keyhole surgery. Open surgery may be needed if the fibroids are large. An open surgery procedure is usually more painful than keyhole surgery and will have a longer recovery time. During a myomectomy, a surgeon will cut into the belly and remove the fibroids. Once they have removed the fibroids, they will close the cut with stitches. This surgery removes the large intestine, rectum, and anal canal. Together, these make up the lowest part of the gut. Proctocolectomy can be used to treat ulcerative colitis, bowel cancer, and some forms of Crohn’s disease. If possible, the surgery will be done using a keyhole procedure. If this is not appropriate, surgeons will use open surgery. 5. Complex spinal reconstruction Complex spinal reconstruction refers to several medical procedures used to treat spinal damage or disorders. These include spinal stenosis and scoliosis. A surgeon will use metal rods and screws to correct a curved spine or make the spine stable. The spine has a high concentration of nerves and nerve endings, potentially making this surgery very painful. Recovery will differ, depending on the type of surgery and the individual. Recovery varies depending on the operation. Even people having the same operation may experience recovery differently. A doctor can give person-specific advice on how to manage pain after an operation. They may also prescribe pain medications and give someone tips on how to make their recovery easier. Pain after an operation is not always preventable. While opioid narcotics are often good pain relievers, they may have some negative side effects, ranging from depression to breathing difficulties. A doctor will monitor and adjust the dose to achieve a good balance of pain control while avoiding adverse effects. There is a wide range of pain medication available to help a person cope, including: - Nonsteroidal anti-inflammatory drugs (NSAIDs), such as ibuprofen or acetaminophen for mild to moderate pain - Opioids, such as morphine, for moderate or severe pain For some procedures, an epidural or peripheral nerve block catheter may be used to continuously infuse medication into the body that causes numbness for up to 4 days. A person should tell their doctor, as soon as possible, about any uncontrolled pain that they are having. Pain medication may not work immediately, so getting pain relief immediately can help prevent it from getting worse. Pain medication should make a person feel more comfortable and better able to move around, which can help with a good recovery. After most surgeries, doctors recommend that a person eats, drinks, and moves around as soon as possible. If needed, a physical therapist can give person-specific exercises to help them recover. Everyone feels pain differently, including after different types of surgery. While some discomfort is unavoidable, a clear pain management plan and talking to medical carers about its effectiveness will help someone have a smooth recovery.

http://sutured.com/what-are-the-

en

Forex Trading Course And Certification What is Forex Trading? Forex Trading is a decentralized global or over-the-counter market where people trade all the world currencies. Forex Trading also referred to as Foreign Exchange or FX or Currency Trading. Forex Trading firms are plentiful, but picking one of the utmost quality is paramount. Some examples are Funding Pips, The5ers, Goat Funded Trader, just to name a few. Whichever trading firm you choose, make sure you research them thoroughly first. The Forex market is the biggest most liquid market in the world that has an average daily trading volume which exceeds 5 trillion dollars as at 2019. Currencies are important to most people around the world whether they agree to it or not because currencies are needed to be exchanged in order to conduct foreign trades and business. Forex is a major part of Foreign Currency and Exchange. Foreign Exchange is the process of changing one currency into another currency for a number of reasons, the most popular are for commerce, trading, or tourism. Forex started since 1973 and has undergone a series of changes yet these changes have made it to become a big, better and accountable forum for transactions. The Main Contributors in the Forex market are the much bigger international banks and financial institutions. Financial centers around the world act as anchors of trading between a very broad range of different types of buyers and sellers all day, with the exception of weekends. Since currencies are always traded in pairs, the Foreign Exchange or FX market does not set a currency's fixed value, they instead determine its relative value by setting the market price of one currency if paid for with another. One unique area of this internationally traded market is that there is no central marketplace for foreign exchange. Instead, currency trading is conducted digitally, that is to say, all transactions occur through inter-connected computers between traders who are in the world, instead of having one centralized exchange. Features And Advantages of Forex Trading There is now a huge retail interest in Forex Trading and some of the key reasons are explained below: 1. Round the Clock Trading: The Forex market never sleeps. It is always open all round the clock, except for the weekend and Bank holidays. This means that people can trade the market at any time that suits them, even after their regular job. 2. No Risks of Manipulation: No manipulation. The Forex market is so huge, large and liquid that you need have no fears about market twists or manipulation because it is decentralized. The volumes for trading are simply so huge that there is no trading body that is big enough to manipulate the prices in their favor. There is an exception of the central bank at certain times. For all extents and purposes, it is as close as you can get to a perfect market. In localized markets, some local large brokers can easily change the pricing by buying or selling large volumes. Foreign Exchange market which is a huge global market, stops those possibilities until or unless some very large entities like the Central Bank of a large economy interfere to keep the nation's interest in check because of the huge upside or downside or the Currency valuation. Any huge increase or decrease in the currency valuation affects the exports and import pricing respectively. 3. Anybody Can Trade: There are different types of trading accounts available that are fit for everybody. You don’t need to be very rich, or even rich to trade Forex. Accounts range from standard to mini or micro accounts that are easy on the pocket. 4. A Highly Liquid Market: The FX market has so many participants and trades such high volumes that you are always assured of your order getting filled. 5. Wide Range of Platforms: Most brokers have various platforms so you could easily pick one that suits you, use a PC or laptop, an iPad or even your mobile phone. 6. You are the Boss to Decide How Much You wish to Invest: In Forex markets you can trade with even as low as 1 dollar. Suit your trade position size. Unlike other markets where you can only trade in pre-determined volumes, you can practically customize your trading unit in the Forex market. Even when markets like stock markets do not have the constraints of lot sizes, even the price of one stock may be higher than what you wish to invest. 7. Low Trading Costs: Most times you would only have to pay the bid-ask spread, which, nowadays is pretty competitive. No other fees apply, for example, commissions for brokerage, exchange and government fees, etc. 8. Leverage Options: It is common in the Forex market for brokers to offer you leveraged trading, which means you only have to put up a small percentage of the value of your trade as a margin. This implies that with careful trading you might be able to make some very nice profits on low investment capital. 9. Freebies: Joining bonuses, demo accounts, specialized charting packages, great research, real-time news flow are some of the free stuff you get in the Forex market. 10. Accessibility: FOREX has a 24 hours 5 days access which makes it easier and better for anyone to make transactions at any time. 11. Transparent: FOREX market is a very transparent market, in other words, there is the accountability of all trades taking place. 12. Enormous Liquidity: FOREX is a very large market having enormous liquidity i.e assets that could be changed into cash. 13. Easy to Start: FOREX is easy to start with a minimum of $300 even less, making it possible for anyone to be involved. 14. Higher Leverage: FOREX provides traders with access to much higher leverage when compared to other financial markets. Key Players in FX Market: The key players in the forex market are: 1. The Commercial Banks, 2. The Federal Reserves (Fed), 3. The Central Banks etc. Key Terms in the FX Market: Some of the Terms in Forex include: 1. PIP: PIP is short form for Percentage In Point or Price Interest Point. A pip is the base unit in the price of currency pairs or 0.0001 of the quoted price. 2. Spread: The spread is the difference between a currency pair's bid and ask price. For the most popular currency pairs, the spread is often low-sometimes even lesser than a pipBefore a trade becomes profitable, the value of the currency pair must cross the spread. 3. Margin: Margin is the money in a trader's account. 4. Leverage: Leverage is the capital provided by a forex broker to bolster their client's trading volume. 5. Bulls: means market going up 6. Bears: means market going down Economic Factors that Affects the FX Market: These are some of the factors to be considered when trading the FX market, they are: 1. Trade Deficits, 2. Industrial Production, 3. Unemployment Rates, 4. Business Inventories, 5. Durable Goods Orders, 7. Gross Domestic Product (GDP), 8. Interest Rates Nominal and Real Rate of Interest, 9. Producer Price Index (PPI), 10. Consumer Price Index (CPI), 11. Personal Income, 12. Currency Fluctuation etc. Advantages of Studying Forex: 1. To learn and understand the rudiments of Forex Trading. 2. To gain knowledge on both FX trading strategy and FX market behavior. 3. It helps to be a better fund manager. 4. It helps to create networking opportunities. 5. It offers career advancement for financial professionals. 6. It offers job opportunities in financial and investment firms. Forex Trading Course Outline: Forex Trading - Introduction Forex Trading - What is the FX Market Forex Trading - Why Trade FX Market Forex Trading - History of the FX Market Forex Trading - Market Structure Forex Trading - Key Players in FX Market Forex Trading - International Overview Forex Trading - FX Regulations Forex Trading - Your Role in the FX Market Forex Trading - How Can Forex be Accessed? Forex Trading - Video Lectures Forex Trading - Exams And Certification

https://siitgo.com/blog/forex-trading-course-and-certification/715

en

- August 9, 2017 Power-system automation is the act of automatically controlling the power system via instrumentation and control devices. Substation automation refers to using data from Intelligent electronic devices (IED), control and automation capabilities within the substation, and control commands from remote users to control power-system devices. Since full substation automation relies on substation integration, the terms are often used interchangeably. Power-system automation includes processes associated with generation and delivery of power. Monitoring and control of power delivery systems in the substation and on the pole reduce the occurrence of outages and shorten the duration of outages that do occur. The IEDs, communications protocols, and communications methods, work together as a system to perform power-system automation. The term “power system” describes the collection of devices that make up the physical systems that generate, transmit, and distribute power. The term “instrumentation and control (I&C) system” refers to the collection of devices that monitor, control, and protect the power system. Power-system automation is composed of several tasks. Data acquisition refers to acquiring, or collecting, data. This data is collected in the form of measured analog current or voltage values or the open or closed status of contact points. Acquired data can be used locally within the device collecting it, sent to another device in a substation, or sent from the substation to one or several databases for use by operators, engineers, planners, and administration. Computer processes and personnel supervise, or monitor, the conditions and status of the power system using this acquired data. Operators and engineers monitor the information remotely on computer displays and graphical wall displays or locally, at the device, on front-panel displays and laptop computers. Control refers to sending command messages to a device to operate the I&C and power-system devices. Traditional supervisory control and data acquisition (SCADA) systems rely on operators to supervise the system and initiate commands from an operator console on the master computer. Field personnel can also control devices using front-panel push buttons or a laptop computer. In addition, another task is power-system integration, which is the act of communicating data to, from, or among IEDs in the I&C system and remote users. Substation integration refers to combining data from the IED’s local to a substation so that there is a single point of contact in the substation for all of the I&C data. Power-system automation processes rely on data acquisition; power-system supervision and power-system control all working together in a coordinated automatic fashion. The commands are generated automatically and then transmitted in the same fashion as operator initiated commands. Hardware structure of the power-system automation The instrument transformers with protective relays are used to sense the power-system voltage and current. They are physically connected to power-system apparatus and convert the actual power-system signals. The transducers convert the analog output of an instrument transformer from one magnitude to another or from one value type to another, such as from an ac current to dc voltage. Also the input data is taken from the auxiliary contacts of switch gears and power-system control equipment. Main processing instrumentation and control (I&C) device The I&C devices built using microprocessors are commonly referred to as intelligent electronic devices (IEDs). Microprocessors are single chip computers that allow the devices into which they are built to process data, accept commands, and communicate information like a computer. Automatic processes can be run in the IEDs. Some IEDs used in power-system automation are Remote Terminal Unit A remote terminal unit is an IED that can be installed in a remote location, and acts as a termination point for field contacts. A dedicated pair of copper conductors is used to sense every contact and transducer value. These conductors originate at the power-system device, are installed in trenches or overhead cable trays, and are then terminated on panels within the RTU. The RTU can transfer collected data to other devices and receive data and control commands from other devices. User programmable RTUs are referred to as “smart RTUs.” Meter is an IED that is used to create accurate measurements of power-system current, voltage, and power values. Metering values such as demand and peak are saved within the meter to create historical information about the activity of the power system. Digital fault recorder A digital fault recorder (DFR) is an IED that records information about power-system disturbances. It is capable of storing data in a digital format when triggered by conditions detected on the power system. Harmonics, frequency, and voltage are examples of data captured by DFRs Programmable logic controller (PLC) A Programmable Logic Controller can be programmed to perform logical control. As with the RTU, a dedicated pair of copper conductors for each contact and transducer value is terminated on panels within the PLC. It is like a work-horse which work upon the command given by their master. A protective relay is an IED designed to sense power-system disturbances and automatically perform control actions on the I&C system and the power system to protect personnel and equipment. The relay has local termination so that the copper conductors for each contact do not have to be routed to a central termination panel associated with RTU Supervisory control and data acquisition Main article: SCADA A supervisory control and data acquisition system (SCADA) transmits and receives logic or data from events of controls, metering, measuring, safety and monitoring of process devices such as Electrical equipment, Instrumentation devices, telecommunication on industrial applications. Power system elements ranging from pole-mounted switches to entire power plants can be controlled remotely over long distance communication links. Remote switching, telemetering of grids (showing voltage, current, power, direction, consumption in kWh, etc.), even automatic synchronization is used in some power systems.

https://excelautomationsolutions.com/power-system-

en

Unlocking the Potential of Generative AI: Balancing Innovation with Privacy Generative AI is revolutionizing industries, but with great power comes great responsibility … UAE Personal Data Protection Law The UAE Personal Data Protection Law (UAE PDPL) applies to all public and commercial organizations in the UAE that deal with personal data, regardless of their size or location. Any information that relates to an identifiable individual, either directly or indirectly, such as a name, identification number, location data, online identifier, or any other factor that is specific to the individual’s physical, physiological, genetic, mental, economic, cultural, or social identity is considered to be personal data. The law defines personal data in a broad sense to include all of this information. The PDPL imposes a number of obligations on entities that process personal data. One of these obligations is to obtain the consent of the data subject before collecting, using, or disclosing that data. Other obligations include using the data only for the purposes for which it was collected, used, or disclosed, and using appropriate technical and organizational measures to protect the security and confidentiality of the data. The PDPL and the GDPR: A Comparison Both the UAE Personal Data Protection Law and the GDPR have a number of similarities as well as some differences. Under both sets of rules, processing personal data requires obtaining consent from the individual whose information is being processed, limiting the collection and use of such data to predefined and allowed goals, and using suitable controls to prevent unauthorized access to the information. Nevertheless, the General Data Protection Regulation (GDPR) provides extra particular restrictions on the rights of data subjects, such as the right to have one’s data deleted, the right to have one’s data moved to another location, and the right to object to having one’s data processed. In contrast, the UAE PDPL requires both the competent authorities and impacted persons to be notified in the case of a data breach. Moreover, the UAE PDPL requires the appointment of a data protection officer. The UAE Personal Data Protection Law (PDPL) has more rigorous regulations than the CCPA does regarding the adoption of acceptable security measures to protect personal data and the obtaining of data subject approval. The California Consumer Privacy Act (CCPA) does, however, include more specific requirements on the rights of data subjects. These rights include the rights to know what personal information is being collected, the right to seek deletion of personal information, and the right to opt-out of the sale of personal information. The PDPL’s common criticisms If an organization has a presence in the United Arab Emirates (UAE), it is required to take efforts to ensure that it complies with the UAE PDPL; otherwise, the organization runs the risk of experiencing legal and reputational penalties. The United Arab Emirates’ Personal Data Protection Law has come under fire for allegedly including wording that is unclear in key areas, which may result in uneven application of the law. For example, It requires that data controllers get approval from data subjects before processing their personal data. However, it does not clarify what sort of consent is valid or whether or not it must be explicit or whether it might be implicit. Another criticism is that it does not go into sufficient depth to protect the rights of data subjects, such as the right to deletion and the right to data portability. These are issues that are addressed in greater depth by other data privacy frameworks, such as the General Data Protection Regulation (GDPR). It’s possible that this will put people living in the UAE at a disadvantage in comparison to other people all around the world who are also data subjects. In addition, there are skeptics who are concerned about the prospective effects that the PDPL might have on businesses headquartered in the UAE, particularly small and medium-sized enterprises (SMEs), who may find it difficult to fulfill the new requirements and incur substantial costs in the process of doing so. The PDPL has been viewed with skepticism since it introduces yet another set of laws for businesses operating in the United Arab Emirates. This has raised concerns that it may reduce the amount of money invested in the country by outside parties. Despite the fact that the PDPL has been criticized, it is still a significant step in the right direction towards preserving the privacy and rights of data subjects in the UAE. It is likely that more advice and revisions will be made in order to address some of the problems that have been pointed out. Impacts of the PDPL The introduction of the Personal Data Protection Law in the United Arab Emirates has significant impacts and implications for both data controllers and data subjects. Some of the most notable impacts include: - Increased protection of personal data: It provides comprehensive legal protection for personal data, ensuring that data subjects’ rights are respected and upheld by data controllers. - Compliance requirements for data controllers: It imposes strict compliance requirements on data controllers, including the need to obtain consent, implement security measures, and report data breaches to authorities. - Potential fines and penalties: Non-compliance with it can result in significant fines and penalties, which could have significant financial implications for businesses operating in the UAE. - Increased awareness of data privacy: The introduction of this Law has raised awareness of data privacy and protection in the UAE, with many businesses and organizations now taking steps to ensure compliance with the new legislation. - Comparison with other legal frameworks: It has been compared to other legal frameworks, such as the General Data Protection Regulation of the European Union, which has implications for businesses operating across multiple jurisdictions. Because the PDPL has such far-reaching implications and repercussions, businesses and organizations in the United Arab Emirates (UAE) have to ensure that they continue to comply with the new law in order to avoid incurring fines and other penalties. Also, the new law strengthens protections for the rights of data subjects as well as their privacy. Checkout Other Whitepapers This paper is an in-depth analysis of the newly introduced Digital Personal Data Protection Act 2023. The Act is a simple and … In an age defined by technological leaps, the convergence of Generative AI and Data Privacy emerges as a pivotal crossroads.As Generative AI … The European Commission introduced a proposal in April 2021 to regulate artificial intelligence (AI) in a 108-page document, aiming to establish a …

https://tsaaro.com/white_paper/uae-

en

Plastic extrusion is the process that’s used to create plastic products with a constant cross-section – that means something long and tube-like rather than a singular piece that can be created in a mould. The resulting items can be used for a diverse range of purposes across an enormous range of industries – for example, curtain rails, straws and all kinds of plastic piping are manufactured through plastic extrusion. Read on to find out more about the plastic extrusion process with Mojak Plastics – a leading designer and manufacturer of plastic extrusion in Melbourne. All types of plastic extrusion profiles are designed and manufactured by a plastic extrusion machine. Not all machines are created equal – they come in a range of sizes, capabilities and throughput levels. However, the essential components are the same, as is the general plastic extrusion process: There are a range of plastics that can be used in the plastic extrusion process, each offering its own particular qualities and capabilities. To view a list of the plastics that Mojak Plastics can work with, click here. In the end, the die is the key part of the plastic extrusion process – it shapes the plastic and allows it to flow evenly when it’s in its molten state so that the resulting extrusion is consistent in shape and texture. The final shape is referred to as a “profile”. These dies must often be custom-made to suit specific requirements, and this is the area of extrusion in which Mojak Plastics specialises and excels in – the production of extruded plastic profiles designed to suit exact client requirements. To find out more about how we can help you create custom extruded plastic profiles at our Melbourne factory, give us a call on (03) 9464 2911 or fill out our online form. We have a long and experienced history in this industry and will work with you to manufacture the plastic extrusion profiles you need to fulfil any industrial application.

http://www.mojakplastics.com.au/plastic-

en

“The health of the internet and online life is why we exist.” Mitchell Baker, Executive Chair of the Board, Mozilla Foundation Mozilla makes privacy-respecting products Private & secure browsing The web’s most intriguing articles Detect fake shopping reviews Hide your phone number and email from spammers A VPN you can trust Protect your private info from data brokers “Mozilla is taking bets to show the world there’s a business to be made with trustworthy AI. That includes putting things like human rights, data protection and transparency at the core of how these complex systems work.” Join us in shaping trustworthy AI Mozilla’s work with AI isn’t just a new thing—we’ve spent years funding, building and advocating for AI that’s open, fair and developed responsibly. Our focus is on creating AI that serves the people, prioritizes transparency and supports the public good, not corporate agendas. Read moreSo, what is Mozilla? At its core, Mozilla is an activist organization led by the Mozilla Foundation that makes change in the world through a variety of ventures including Mozilla Corporation, MZLA, Mozilla Ventures and Mozilla AI. How are we different? Because we’re mission-driven, it means we have the freedom to make all of our decisions based on what’s best for the internet and for everyone online, not based on the demands of shareholders — we don’t actually have any of those. Learn about the Mozilla FoundationDonate to Mozilla Foundation today to ensure the internet remains open and accessible to all. That one time we gave away our source-code… The Mozilla project was founded in San Francisco in 1998, when the Netscape browser made the radical decision to give away its program code to the public to build on and improve. At that time, one company had a virtual monopoly on how people experienced the internet. Eventually, the open-source Mozilla project morphed into the wildly popular first version of Firefox. Today, Mozilla continues its movement toward a better internet with millions of active community members spanning the globe, advocating for ethical tech, trustworthy AI and producing privacy-first products that give more power to the people.

https://www.mozilla.org/en-

en

History Of Highlife Music – The Origin From the shores of West Africa emerges a musical genre that resonates with the soul and echoes the vibrant spirit of its people. Highlife music, with its infectious melodies, intricate rhythms, and deep cultural roots, stands as a cornerstone of the region’s artistic heritage. Embarking on a journey through the history, characteristics, social significance, and global influence of highlife, we uncover a musical tapestry that intertwines tradition and modernity, uniting communities and captivating audiences worldwide. Origins and Evolution The birthplace of highlife music is often traced to the coastal towns of Ghana and Nigeria during the late 19th century. Emerging as a synthesis of traditional Akan rhythms and European musical elements brought by colonialists and sailors, highlife quickly found its place in the hearts of West Africans. In its early days, highlife was characterized by its fusion of indigenous melodies and Western instruments, such as brass bands and guitars. The genre’s name itself is indicative of its aspirational nature, with “highlife” connoting the idea of upward social mobility and the pursuit of a better life. As the 20th century progressed, highlife underwent various transformations. It embraced influences from Latin America, jazz, and swing, further enriching its sonic palette. Pioneering artists like E.T. Mensah, the “King of Highlife,” and Osibisa, a band that blended highlife with rock and funk, contributed to the genre’s evolution. Highlife’s adaptability and propensity for fusion ensured its longevity and continued relevance in a changing musical landscape. Musical Elements and Characteristics Central to highlife’s allure is its captivating blend of musical elements. The genre’s rhythmic complexity draws from the intricate rhythms of West African percussion instruments, such as the kpanlogo drums and congas. This foundation is complemented by the melodic interplay between Western brass instruments and indigenous string instruments, such as the guitar and the palm wine guitar. Highlife compositions often feature call-and-response vocals, creating an interactive dynamic between the lead singer and the chorus. The lyrics frequently touch upon themes of love, societal issues, and everyday experiences, making them relatable to a wide range of listeners. The danceability of highlife rhythms further amplifies its universal appeal, encouraging people to join in communal celebrations. Cultural Significance and Social Context Highlife music is more than just entertainment; it’s a mirror reflecting the values, hopes, and challenges of West African societies. The lyrics often delve into matters of social justice, colonialism, and the aspirations of everyday people. Through storytelling, highlife has historically been a vehicle for preserving oral traditions and sharing cultural wisdom across generations. Beyond its lyrical content, highlife serves as a unifying force. In its formative years, it provided a space for diverse communities to come together and celebrate. Highlife events, often featuring energetic dancing and jubilant music-making, fostered a sense of belonging and camaraderie. Even today, highlife gatherings maintain their ability to unite people from different walks of life. Global Impact and Influence The influence of highlife music extends far beyond the shores of West Africa. In the mid-20th century, African artists began to incorporate highlife elements into their works, enriching their own musical traditions. Highlife’s impact on genres like Congolese rumba, Cape Verdean morna, and Nigerian Afrobeat is palpable. Furthermore, highlife’s international journey saw it influencing global popular music. The groovy rhythms and vibrant melodies of highlife captured the attention of musicians worldwide. Artists like Paul Simon, in his groundbreaking album “Graceland,” and Afrobeat legend Fela Kuti, who infused highlife with political and social commentary, drew inspiration from highlife’s rich tapestry. Challenges and Resurgence While highlife remains deeply cherished, it has faced challenges in maintaining its prominence amid the evolving music industry. The emergence of new genres and technological advancements posed competition for the genre’s spotlight. However, a resurgence of interest in traditional music and the efforts of contemporary artists to infuse highlife with modern sounds have breathed new life into the genre. Young artists are embracing highlife, reimagining its characteristics in innovative ways while retaining its core essence. This revival not only pays homage to the genre’s history but also ensures its continued relevance for generations to come. Preservation and Future Prospects As with any cultural treasure, the preservation of highlife music is crucial. Initiatives to document the genre’s history, educate younger generations, and provide platforms for highlife artists to share their craft are essential for its longevity. Collaborations between seasoned highlife musicians and emerging talents contribute to the genre’s continuity, creating a bridge between the past and the future. Highlife Music – Conclusion Highlife music, with its captivating rhythms and melodic richness, serves as a testament to the power of cultural fusion. Born from the interactions between indigenous traditions and colonial influences, highlife encapsulates the resilience and creativity of West African communities. Its journey from the shores of Ghana and Nigeria to the global stage showcases its ability to transcend boundaries and inspire artists across continents. As we celebrate highlife’s past, present, and future, we recognize its role in uniting people, preserving traditions, and uplifting spirits. From the jubilant celebrations of its early days to the contemporary sounds that honor its heritage, highlife music remains a harmonious testament to the vibrant cultural mosaic of West Africa. Want To Make Good Afrobeat Music? We offer top notch online Afrobeat music making services here at Freaksonar. Find our services below :

https://www.freaksonar.com/history-of-highlife-music-the-

en

When you think about fasting, what’s the first thing that comes to mind? For many, it’s a quick-fix weight loss strategy. But the benefit of fasting is so much more than shedding a few pounds. In this article, you’ll learn about 5 top health benefits of fasting you never knew existed! Types of fasting Fasting is a versatile practice with various types suited to different lifestyles and goals. Here are the most popular types of fasting: - Intermittent fasting: This involves alternating cycles of eating and fasting. Popular methods include the 16/8 method, where you fast for 16 hours and eat during an 8-hour window. - Water fasting: Involves abstaining from all food and drink except water for a specific duration. - Juice fasting: Consuming only fruit and vegetable juices. It’s seen as a gentler alternative to water fasting, providing nutrients while resting the digestive system. - Dry fasting: This is the most extreme form of fasting. It involves abstaining from all food and liquids, including water. Benefits of fasting 1. Aids weight loss One of the most well-known benefits of fasting is its role in weight management. When you fast, your body, in the absence of regular fuel from food, turns to stored fats for energy, a process known as lipolysis. This not only aids in weight loss but also improves your metabolism. Studies have shown that intermittent fasting can reduce body weight, body fat percentage, and even waist circumference. See the best foods for weight loss. 2. Improve blood sugar control Research indicates that fasting can improve insulin sensitivity, allowing the body to handle glucose more efficiently. This is particularly significant for preventing or managing type 2 diabetes. Additionally, intermittent fasting has been shown to influence not only the control of blood sugar levels but also to reduce inflammation, which is a known risk factor for many chronic diseases. 3. Better heart health One of the lesser-known benefits of fasting is its positive impact on heart health. Fasting helps lower LDL cholesterol, also known as ‘bad’ cholesterol, and increases HDL cholesterol, the ‘good’ cholesterol. This balance is crucial for maintaining healthy blood vessels and reducing the risk of heart disease like atherosclerosis. Furthermore, fasting can help reduce blood pressure and triglycerides, both risk factors for heart disease. Also read: Top 11 foods for your heart 4. Enhanced mental function The benefits of fasting extend to the brain as well. It stimulates the production of brain-derived neurotrophic factor (BDNF), a protein that plays a vital role in neuron growth and the maintenance of brain health. This process is thought to enhance memory and learning and may even protect against neurodegenerative diseases like Alzheimer’s and Parkinson’s. 5. Aids detoxification and slows down aging Another fascinating benefit of fasting is its potential to extend lifespan. During fasting, the body initiates cellular repair processes, such as autophagy, where cells self-cleanse and remove damaged components. This process helps slow aging and reduces the risk of age-related diseases like Parkinson’s. Also read: 11 Best foods for cold and flu. The benefits of fasting go well beyond weight loss. This practice offers a range of health advantages, from regulating blood sugar to enhancing brain function and promoting longevity. It’s important, however, to approach fasting with caution, especially for individuals with specific health conditions or dietary needs. Consulting with a healthcare provider before starting any fasting regimen is always recommended.

https://healthyandlively.com/5-surprising-health-benefits-of-fasting-more-

en

As a mom, you want to create a nurturing and supportive home environment for your child with autism. With sensory sensitivities, communication challenges, and unique needs, it’s essential to create an environment that promotes their sensory, emotional, and social regulation. Creating an autism-friendly environment can significantly impact your child’s comfort, development, and overall well-being and in this article, we will explore practical strategies and tips for creating an autism-friendly home environment for your child. From creating sensory-friendly spaces to establishing visual schedules, we will provide valuable insights and ideas to help you make your home a safe, welcoming, and accommodating space where your child with autism can thrive. Why Do You Need To Create A Friendly Environment For Your Autistic Child? Here are some reasons why creating an autism-friendly home environment is essential for your child: Many children with autism have sensory sensitivities, which means they may be overwhelmed or overstimulated by certain sights, sounds, textures, or smells. Creating a sensory-friendly environment at home can help your child regulate their sensory input, reduce sensory overload, and create a sense of calm and comfort. Communication challenges are common in autism, and providing a communication-friendly environment at home can foster your child’s communication skills. Visual supports, such as visual schedules, labels, and social stories, can aid in understanding and expression, while a conducive environment for communication can encourage your child to communicate their needs, thoughts, and feelings. Children with autism may struggle with emotional regulation, and a supportive home environment can help promote emotional well-being. A calming and predictable home environment can reduce anxiety and stress, provide a sense of security, and foster emotional resilience in your child. Social skills are important for children with autism, and creating opportunities for social interaction at home can be beneficial. Designing spaces that encourage social play, communication, and social bonding with family members can help your child develop and practice social skills in a familiar and supportive environment. Independence and Autonomy Promoting independence and autonomy is crucial for children with autism. Creating an autism-friendly home environment that is organized, accessible, and structured can empower your child to develop self-help skills, engage in daily routines, and participate in household activities, fostering independence and autonomy. When you create an autism-friendly home environment for your child, you can provide your child with a supportive and nurturing space that meets their unique needs, enhances their development, and promotes their overall well-being. In the next section, we will delve into practical strategies and tips to help you create an autism-friendly environment that caters to your child’s individual strengths and challenges. Tips For Creating An Autism-Friendly Environment For Your Child Here are important tips to create a suitabe environment for your child: Understand Your Child’s Sensory Needs Take the time to observe and understand your child’s sensory sensitivities. Note their triggers and preferences, and design your home environment accordingly. For example, you can create sensory-friendly spaces with dim lighting, soft textures, and minimal noise to reduce sensory overload. Establish Visual Supports Visual supports, such as visual schedules, social stories, and labels, can help your child with autism understand and navigate their daily routines and expectations. Use visual supports to communicate rules, schedules, and expectations clearly and consistently throughout your home. Create Calm and Predictable Spaces Design calm and predictable spaces in your home where your child can retreat when feeling overwhelmed. Consider using calming colors, soft lighting, and comfortable seating in these spaces to promote relaxation and emotional regulation. Organize and Simplify Keeping your home organized and clutter-free can help your child with autism navigate their environment more easily. Create clear and simple systems for organizing toys, clothes, and other items, and use visual cues, such as labels or visual schedules, to help your child locate and access items independently. Consider Sensory-friendly Furniture and Equipment Choose furniture and equipment that are sensory-friendly for your child with autism. For example, consider furniture with soft textures, adjustable seating options, or specialized sensory equipment, such as a sensory swing or a weighted blanket, that can provide comfort and regulation. Incorporate Social Interaction Opportunities Create spaces in your home that encourage social interaction and communication. For example, designate an area for family playtime, set up a cozy reading nook, or create a designated spot for family meals where your child can practice social skills, engage in communication, and bond with family members. Personalize the Environment Consider incorporating your child’s interests, hobbies, and preferences into the home environment. Personalize their bedroom, play area, or study space with items that are meaningful to them. This includes favourite toys, artwork, or books, to create a sense of ownership and comfort. Seek Input from Your Child Involve your child in the process of creating an autism-friendly home environment. Ask for their input, preferences, and feedback, and consider their unique needs and perspectives when making changes to the home environment. This can empower your child, increase their sense of ownership, and promote their independence. By following and incorporating creative strategies, you can create a supportive, and empowering home environment for your child with autism. Steps To Create An Autism-Friendly Environment For Your Child Creating an autism-friendly environment for your child involves taking intentional steps to make your home a supportive and accommodating space. Here are some practical steps you can take: Evaluate and Modify Sensory Stimuli Sensory sensitivities are common in children with autism, so it’s important to evaluate and modify sensory stimuli in your home. This can include reducing bright lights, loud noises, or overwhelming smells. You can also create designated quiet areas where your child can retreat to when they need to self-regulate. Establish Predictable Routines Predictable routines can provide a sense of stability and comfort for children with autism. Establish consistent schedules for daily activities such as mealtimes, bedtime, and transitions. Use visual schedules or visual timers to help your child understand and anticipate the sequence of events. Create Clear Visual Supports Visual supports can help your child understand expectations and routines. Create visual supports such as visual schedules, visual cues, and social stories to communicate rules, expectations, and social situations. These visual supports can provide clear and concrete information to your child, reducing anxiety and promoting independence. Organize and Simplify the Environment Keeping the environment organized and simplified can help reduce sensory overload and confusion. Declutter the space, arrange furniture and belongings in an organized manner, and create clear pathways for movement. Avoid excessive decorations or visual distractions that can overwhelm your child. Provide Structured Play Opportunities Structured play opportunities can help your child with autism develop social skills, communication skills, and play skills. Create designated play areas with appropriate toys, games, and activities that align with your child’s interests and developmental level. Provide clear rules and expectations for playtime, and engage in joint play activities to encourage social interactions. Consider Sensory Supports Sensory supports such as sensory toys, cushions, or fidget tools can help your child self-regulate and manage sensory sensitivities. Consider incorporating sensory supports in your home environment based on your child’s individual needs and preferences. Foster Communication and Social Interaction Communication and social interaction are key areas of development for children with autism. Create opportunities for communication and social interaction at home through activities such as family meals, joint play, and shared interests. Use visual supports, social stories, and social scripts to support communication skills and social understanding. Collaborate with Professionals Collaborating with professionals such as therapists, and educators, can provide valuable guidance and support in creating an autism-friendly environment. Seek professional input and incorporate their recommendations into your home environment to best support your child’s unique needs. Incorporate Visual Cues and Supports Visual cues and supports can help your child with autism understand and follow routines, rules, and expectations. Consider using visual cues such as labels, signs, or pictures to indicate where items are kept, what activities are expected, or what behaviors are appropriate. Visual supports can help your child navigate the environment independently and reduce misunderstandings. Promote Flexibility and Choice Children with autism may have a preference for routine and predictability, but it’s important to promote flexibility and choice within the home environment. Allow your child to make choices whenever possible, such as choosing their activities, toys, or snacks. Encourage flexibility in routines and schedules, and provide options for your child to make decisions within appropriate boundaries. This can help your child develop decision-making skills, self-advocacy, and a sense of autonomy. In conclusion, creating an autism-friendly environment at home is a proactive and intentional process that can greatly benefit your child with autism. By taking steps to evaluate and modify sensory stimuli, establish predictable routines, provide visual supports, organize and simplify the environment, offer structured play opportunities, consider sensory supports, foster communication and social interaction, collaborate with professionals, incorporate visual cues and supports, and promote flexibility and choice, you can create a supportive and accommodating space for your child to thrive. Frequently Asked Questions Yes, creating an autism-friendly environment at home can greatly benefit your child with autism. It can provide a supportive and accommodating space that promotes sensory regulation, predictable routines, clear communication, and opportunities for social interaction and choice, which can contribute to your child’s overall well-being and developmental progress. You don’t need a large space or extensive resources to create an autism-friendly environment. Simple modifications such as decluttering, organizing, and creating designated sensory areas can make a significant difference. You can also seek guidance from professionals, utilize online resources, and adapt strategies to suit your specific circumstances and budget. Signs of sensory overload in children with autism may include covering their ears, avoiding certain areas or activities, becoming agitated or anxious, displaying sensory-seeking behaviors, or experiencing meltdowns or shutdowns. Observing and understanding your child’s sensory responses can help you identify triggers and make appropriate adjustments to create a more sensory-friendly environment. Children with autism may have a preference for routine and predictability, and changes in routines or schedules can be challenging for them. You can prepare your child in advance for changes using visual supports, social stories, and social narratives. You can also provide clear communication, offer choices within appropriate boundaries, and gradually introduce changes while maintaining consistency and predictability in other areas of the environment. Communication challenges are common for children with autism, but there are various strategies you can use to support communication at home. These may include visual supports such as visual schedules, social stories, and visual cues; using simple and clear language; incorporating visual aids like pictures or sign language; and seeking support from speech-language pathologists or other professionals.

https://amumandmore.com/autism-friendly-environment-for-your-child/

en

ELECTRIC CLASSIC CARS Revival Autos' Electric Classics: A Journey Through Time and Innovation Table of Contents Introduction: Electric classic cars Electric classic cars represent a fascinating intersection between nostalgia and modern technology. They take beloved vintage vehicles and retrofit them with electric drivetrains, allowing enthusiasts to enjoy the charm of classic designs while benefiting from the environmental advantages and efficiency of electric power. Electric Classic Cars: These are traditional vehicles that have been modified to use an electric motor instead of an internal combustion engine (ICE). - Environmental Impact: Reduced emissions compared to gas-powered engines. - Efficiency: Electric motors convert energy into motion more effectively than combustion engines. - Maintenance: Fewer moving parts in electric drivetrains can lead to lower maintenance costs. - Performance: Instant torque delivery can enhance acceleration and driving experience. The process involves several steps: - Selection of a Classic Car: Choose a vehicle that resonates with personal taste or has historical significance. - Removal of Existing Engine & Components: This includes taking out the gas engine, transmission, exhaust systems, etc. - Installation of Electric Drivetrain: - Integration with Existing Systems: Adapting braking, steering, and electrical systems for compatibility with new components. - Weight Distribution: Adding batteries can affect handling if not properly balanced. - Range Anxiety: The distance an electric car can travel on a single charge may be less than what some drivers are accustomed to with gasoline cars. - Cost: Converting a classic car can be expensive due to parts and labor involved. Popular Models for Conversion Some popular classic models often converted include: - Austin Healey - Ford Mustang - Volkswagen Beetle - Chevrolet Corvette - Porsche 911 Community & Culture There is a growing community around electric classic cars where enthusiasts share their experiences through forums, social media groups, and events focused on sustainable automotive practices. As battery technology improves: - Longer range capabilities will become standard, - Charging infrastructure will expand, - More manufacturers may offer kits for DIY conversions. By understanding these core aspects of electric classic cars, you gain insight into how they blend heritage with innovation—keeping the spirit of classic automobiles alive while embracing sustainable transportation solutions! Electric classic cars by Revival Autos Embark on an illuminating journey as we delve into the world of Electric classic cars. From the captivating history that shaped these timeless icons to the cutting-edge technology that fuels their revival, our comprehensive guide explores every facet of this automotive revolution. We’ll uncover the benefits and challenges, reveal the secrets of conversion, and witness the intriguing comparison between electric classics and their gasoline counterparts. Navigate through best practices, understand the pivotal role these cars play in preserving automotive heritage, and gain insights into the future of this eco-conscious movement. Get ready to power up your knowledge and join us in the electrifying world of Electric classic cars, driven by Revival Autos. - Preserving Heritage: Electric classic cars is on a mission to preserve the timeless charm of classic automobiles. They take vintage car models and breathe new life into them by converting them into electric vehicles. - Eco-Friendly Classic Rides: By replacing traditional internal combustion engines with electric powertrains, these classic cars not only retain their original aesthetics but also become eco-friendly, emitting zero emissions. - Seamless Integration: The electric conversion seamlessly integrates into the car’s design, maintaining the classic look and feel while upgrading its performance. - Performance Upgrades: Electric classic cars are not just about looks; they offer improved acceleration, torque, and a quieter, smoother ride. - Customization: Each project is a work of art, with a range of customization options. You can tailor your electric classic car to your preferences, from paint colors to interior design. - Modern Technology Meets Classic Style: These cars combine the elegance of a bygone era with the latest electric vehicle technology, including regenerative braking and touchscreen displays. - Sustainability: By converting classic cars to electric, Electric classic cars contributes to a more sustainable future by reducing the carbon footprint of vintage automotive enthusiasts. - Iconic Models: Revival Autos specializes in converting iconic classics like the Austin Healey 100 & 3000 into electric masterpieces. - Experience the Future: Electric classic cars offers a unique driving experience, blending the nostalgia of classic cars with the innovation of electric power. - Join the Revolution: Become part of the electric classic car movement, where history and innovation coexist harmoniously. Electric classic cars: What exactly are they? Electric classic cars represent a harmonious fusion of vintage automotive craftsmanship and contemporary electric propulsion systems. This convergence results in eco-conscious, emission-free vehicles that honor the legacy of automotive excellence. History and Significance The realm of electric classic cars is steeped in historical context and carries profound cultural implications. This section delves into their origin, development, and enduring cultural influence, shedding light on their historical relevance and lasting impact. The Origins and Evolution of Electric classic cars To truly understand the significance of electric classic cars, we must start at the beginning—their origins. The idea of electric cars can be traced back to the early 19th century when inventors like Thomas Davenport and Robert Anderson created rudimentary electric vehicles. However, these early experiments were far from the classic cars we admire today. They were limited by primitive battery technology and lacked the elegance and power that would later define classic automobiles. The Rise of Classic Cars The zenith of classic cars dawned during the early to mid 20th century. This will usher in an era that birthed automotive legends. Notable models are Ford Model T, Chevrolet Bel Air, and Cadillac Eldorado. These models ignited collective imagination. Their allure lay in their captivating designs, formidable engines and liberating spirit they embodied. These cars metamorphosed into emblems of an epoch defined by elegance, artisanal craftsmanship and unbounded horizons of the open road. A Fork in the Road As the 20th century progressed, classic cars became cherished collectors’ items, admired for their aesthetic and historical value. However, they also faced growing criticism for their environmental impact. Classic cars of yesteryears were notorious for their emissions and fuel consumption. This paradox presented a challenge to classic car enthusiasts and environmental advocates alike. Historical Significance and Cultural Impact Electric classic cars carry a profound historical significance and cultural impact: Electric classic cars represent a bridge between automotive eras. They marry the elegance and allure of classic car designs with the eco-consciousness of the modern age. This fusion enables us to preserve the automotive heritage of the past while embracing a greener future. These vehicles kindle a profound sense of nostalgia, resonating not only with classic car aficionados but also with anyone who treasures the timeless allure of vintage automobiles. Electric classic cars present a unique opportunity to revisit the past while steadfastly upholding our environmental principles. Perhaps most importantly, electric classic cars contribute to a sustainable legacy. By converting classic cars into zero-emission vehicles, we pay homage to our automotive roots while taking steps toward an eco-friendlier future. It’s a testament to human innovation and our commitment to preserving both the past and the planet. In the subsequent chapters, we’ll delve deeper into the practical aspects of electric classic cars, exploring their benefits, challenges, conversion processes, and what the future holds for these remarkable vehicles. Join us on this journey as we unravel the layers of history and significance that make electric classic cars a true marvel of automotive engineering and cultural preservation. History of Electric classic cars - Early Days: Electric classic cars have been around since the late 19th century, with vehicles like the Flocken Elektrowagen (1888) leading the way. - Quiet Revolution: The early 20th century saw a surge in electric cars, with brands like Detroit Electric and Baker Electric gaining popularity. - Charging Woes: Limited charging infrastructure was a challenge in the past, but owners relied on home charging stations. - 1930s Decline: The rise of gasoline engines led to a decline in electric cars, but some classics from that era still exist. - Resurgence: Electric classics are making a comeback in the 21st century, with companies like Tesla offering modern electric vehicles with classic designs. - Restoration Projects: Enthusiasts often convert vintage cars into electric classics, combining nostalgia with sustainability. - Growing Market: Today, the market for electric classic cars is growing, with various manufacturers and customized options available. - Sustainable Future: Electric classic cars not only preserve automotive history but also contribute to a greener, more sustainable future. - Join the Movement: Embrace the history and future of electric classic cars, and be part of the eco-friendly, stylish revolution! - Revival Autos: Visit Revival Autos for more information and explore the world of electric classic cars! Discover a unique blend of automotive history and a sustainable, stylish future. Types of Electric classic cars - Vintage Replicas: - Modern recreations of classic car designs. - Authentic vintage aesthetics with electric power. - Classic Conversions: - Original classic cars converted to electric. - Preserving the iconic look while going green. - Heritage EVs: - Electric versions of famous classic car models. - A blend of nostalgia and eco-friendliness. - New Classics: - Newly designed electric cars with a vintage touch. - Fusion of classic charm and cutting-edge technology. - Concept Classics: - Electric classic cars designed for the future. - Innovative, eco-friendly, and inspired by the past. - Eco Restorations: - Restored classic cars with electric upgrades. - A sustainable way to relive the classic car experience. Advantages of Electric classic cars - Eco-Friendly: Electric classic cars produce zero emissions, reducing environmental impact. - Cost Savings: Lower operating costs compared to gasoline-powered classics. - Silent Operation: Enjoy a quiet and peaceful ride with electric power. - Efficiency: Electric motors provide instant torque and smooth acceleration. - Minimal Maintenance: Electric cars have fewer moving parts, reducing upkeep. - Longevity: Electric classic cars can last longer with proper care. - Modern Features: Retrofit with modern tech, like touchscreen displays. - Preserve History: Electric conversion helps preserve classic car heritage. - Government Incentives: Access to incentives for electric vehicle owners. - Future-Proofing: Embrace sustainable mobility for the future. Benefits and Challenges Electric classic cars offer a unique combination of vintage charm and modern sustainability. In this chapter, we’ll explore the array of benefits and advantages these vehicles bring to the table. One of the most compelling reasons to embrace electric classic cars is their significant environmental impact. Electric classic cars are zero-emission vehicles. We can convert classic cars from gasoline to electric power. This how we can eliminate tailpipe emissions entirely. There should be decrease in carbon dioxide , nitrogen oxides and particulate matter. This plays pivotal role in enhancing air quality and mitigating our carbon footprint. Reduced Dependence on Fossil Fuels Unlike their gasoline counterparts, electric classic cars are not reliant on fossil fuels. They derive their energy from electricity. This is a resource that can be harnessed from sustainable sources such as solar or wind power. This transition away from fossil fuels seamlessly aligns with our worldwide endeavors. It will also help to diminish our reliance on nonrenewable resources. Quieter, Cleaner Streets Electric classic cars operate quietly, reducing noise pollution in our cities and communities. The absence of engine noise enhances the overall urban environment, making our streets cleaner and more peaceful. Cost-Efficiency and Financial Advantages Beyond their environmental benefits, electric classic cars also offer several financial advantages. Lower Operating Costs Electric vehicles, as a general rule, boast lower operational expenses in comparison to their gasoline-powered counterparts. This efficiency stems from electric motors, which have fewer moving components and demand less maintenance. This translates to savings on routine servicing and repairs. Electric classic cars are highly energy-efficient. Electric motors deliver power directly to the wheels, resulting in less energy waste through heat and friction. This efficiency translates to more miles traveled per unit of energy consumed, reducing overall fuel costs. In a lot of regions, government incentives are available to promote adoption of electric vehicles. Electric classic cars are also fall under those incentives . These incentives may include tax credits, rebates or reduced registration fees. This help us making ownership even more cost effective. Impressive Performance and Efficiency Electric classic cars are not just environmentally friendly; they also offer exceptional performance. Electric motors provide instant torque, resulting in rapid acceleration and a smooth, responsive driving experience. This immediate power delivery adds a thrill factor to driving electric classic cars. Regenerative braking systems in electric classic cars capture and store energy when the brakes are applied. This energy recovery not only enhances efficiency but also extends the vehicle’s range. Electric powertrains are generally lighter than traditional internal combustion engines. This reduction in weight can lead to improved handling and agility, enhancing the overall driving experience. Electric classic cars require less maintenance than their gasoline counterparts. Fewer Moving Parts Electric motors have fewer moving parts than internal combustion engines. This means fewer components that can wear out or break, resulting in reduced maintenance costs over the vehicle’s lifespan. Reduced Fluid Changes Electric classic cars do not require frequent oil changes or transmission fluid replacements, further lowering maintenance expenses. Electric motors are known for their durability and longevity. With proper care, the electric components of a classic car conversion can last for many years. This ensures a lasting investment. Challenges of Electric classic cars - Battery Technology: Electric classic cars face challenges in finding suitable batteries that offer both range and preservation of the vehicle’s vintage aesthetic. - Weight Distribution: Balancing the added weight of electric components without compromising the car’s original handling and performance can be difficult. - Charging Infrastructure: Limited availability of charging stations tailored for classic cars can be a significant hurdle for owners. - Conversion Cost: Converting a classic car to electric can be expensive due to the specialized components and labor involved. - Heritage Preservation: Maintaining the historical and cultural significance of classic cars while upgrading their power source is a delicate balance. - Range Anxiety: Electric classic cars often have limited ranges compared to modern electric vehicles, which can cause anxiety during longer drives. - Regulatory Challenges: Adhering to emission standards and regulations while keeping the vintage appeal can be a complex task. - Sourcing Rare Parts: Finding replacement parts for vintage electric components can be a daunting task. - Resale Value: Uncertainty about the future value of electric classic cars can deter potential buyers. - Education and Awareness: Owners and enthusiasts need to be educated about the advantages and limitations of electric classic cars to foster acceptance and growth in this niche market. Disadvantages and Challenges At Revival Autos, we’re committed to bringing the magic of electric classic cars to life. However, it’s essential to acknowledge the challenges and disadvantages that come with this innovative endeavor. In this chapter, we’ll explore the obstacles and considerations that classic car enthusiasts may encounter when embracing electric classics. Range Limitations and Charging Infrastructure One of the primary challenges associated with electric classic cars is their range limitations. Vintage cars retrofitted with electric powertrains often have smaller battery capacities compared to modern electric vehicles. As a result their driving range on single charge can be limited. The availability of charging infrastructure can also be major concern. While electric vehicle charging networks are growing, they may not be as widespread or accessible as gasoline refueling stations, especially in rural areas. This limitation can affect the convenience and practicality of owning an electric classic car. Battery Degradation and Longevity Over time, all batteries experience degradation, including the lithium-ion batteries commonly used in electric classic car conversions. Factors such as temperature, usage patterns, and charging habits can affect the rate of degradation. Classic car enthusiasts need to be aware that batteries may lose capacity over the years. The longevity of the battery pack is another consideration. While electric classic car conversions can provide many years of reliable service, the eventual need to replace the battery pack should be factored into the cost of ownership. Technical and Conversion Challenges Finding Suitable Components Selecting appropriate components for the conversion can be challenging. Classic cars come in various makes and models, each with unique specifications. Ensuring that the electric powertrain components are compatible with the classic car’s design and structure requires careful consideration. One of the key challenges in electric classic car conversions is preserving the aesthetics and original charm of the vintage vehicle. Enthusiasts and restorers strive to maintain the classic car’s appearance while seamlessly integrating modern electric components, which can be a technically demanding task. Skill and Expertise Successful electric classic car conversions require a high level of skill and expertise. The process involves intricate electrical work, mechanical adjustments, and a deep understanding of both classic car mechanics and modern electric systems. Ensuring that the conversion is safe and reliable is paramount. Benefits and potential challenges of having an Electric Classic Car Benefits | Challenges | – Zero emissions for a cleaner environment | – Limited driving range, especially in older conversions | – Reduced carbon footprint and air pollution | – Dependence on available charging infrastructure | – Quieter operation, minimizing noise pollution | – Potential battery degradation over time | – Lower operating costs due to reduced maintenance | – Technical challenges in component compatibility | – Energy cost savings compared to gasoline counterparts | – Preservation of classic aesthetics during conversion | – Potential government incentives and tax benefits | – Finding suitable components for conversions | – Instant torque delivery for quick acceleration | – Expertise and skill required for successful conversions | – Smooth and responsive driving experience | – Balancing modern amenities with vintage aesthetics | – Potential for enhanced performance through upgrades | – Limited availability of fast-charging solutions | – Fewer moving parts, reducing the need for maintenance | – Potential range anxiety for long trips | – Longer lifespan for electric drivetrain components | – Maintaining the historical integrity of classic cars | This table provides a quick overview of the benefits and challenges associated with electric classic cars, helping enthusiasts and potential buyers weigh the pros and cons of conversion. The Conversion Process How to Convert a Classic Car to Electric Power Converting a classic car to electric power is a complex yet rewarding process that requires careful planning and execution. At Revival Autos, we take pride in helping classic car enthusiasts embark on this transformation journey. In this chapter, we’ll provide an in-depth guide to the conversion process, from vehicle selection to the final testing phase. 1. Vehicle Selection Selecting the right classic car for conversion is the first crucial step. Factors to consider include the vehicle’s weight, available space for batteries, and its structural condition. Some classic cars may be more suitable for conversion due to their design and compatibility with electric powertrains. 2. Safety Assessment Safety is paramount during the conversion process. Before starting any modifications, a comprehensive safety assessment should be conducted. This includes a thorough evaluation of the classic car’s frame, suspension, and brakes. Upgrading these components may be necessary to ensure the vehicle can safely handle the added weight of the electric powertrain. 3. Engine Removal The process begins with the removal of the internal combustion engine, transmission, and associated components. This step clears space within the engine bay for the electric motor and batteries. It’s essential to document and store the removed components properly in case the classic car needs to be returned to its original state in the future. 4. Electric Motor Installation With the engine removed, the electric motor can be installed. The type of motor selected depends on various factors, including the desired performance characteristics and available space. It is typically mounted in the same location as the original engine, ensuring a seamless fit. 5. Battery Placement Careful consideration is given to the placement of the battery pack. The goal is to distribute the weight evenly to maintain the classic car’s balance and handling. Battery placement options include the trunk, under the hood, or even along the chassis. The choice depends on the specific classic car model and the design preferences of the owner. 6. Charging System Integration Select and integrate an appropriate charging system. The choice of charging system depends on the owner’s charging needs and infrastructure. Options include standard home chargers or high-speed chargers for quicker refueling. 7. Electrical Wiring A meticulous approach to electrical wiring is crucial to ensure the reliability and safety of the conversion. All electrical connections should be secure, and the entire system should be properly grounded. Safety features like disconnect switches should also be included. 8. Testing and Tuning Thoroughly test the converted classic car and fine-tune the system for optimal performance. This includes adjustments to torque, acceleration, and braking. Any issues that arise during testing should be addressed promptly to ensure the vehicle operates smoothly and safely. 9. Regulatory Compliance Ensure that the conversion complies with local regulations and safety standards. This may involve inspections and obtaining certifications to ensure the converted classic car meets all legal requirements. Key Components and Model Types for Conversion A successful conversion relies on several key components: - Electric Motor: The choice of an electric motor should align with the desired performance and power requirements of the classic car. - Batteries: Select high-quality lithium-ion batteries with sufficient capacity to provide the desired range and power. - Motor Controller: The motor controller manages the flow of electricity from the batteries to the motor, allowing for precise control of speed and torque. - Charging System: Integrate a charging system that suits the owner’s charging needs and infrastructure. Model Types for Conversion Different classic car models may present unique challenges and opportunities during the conversion process: - Sedans and Coupes: These classic car body styles often provide ample space for battery placement and straightforward conversion processes. - Sports Cars: Sports cars may require special attention to weight distribution to maintain their distinctive handling characteristics. - Convertibles: Preserving the open-top experience while adding electric power can be a unique challenge, often requiring innovative solutions. Elements of a Successful Conversion A successful conversion is more than just the sum of its parts; it’s a holistic process that combines technical expertise and a deep appreciation for classic cars. Key elements include: - Seamless Integration: The electric components should seamlessly blend with the classic car’s aesthetics, preserving its original charm. - Safety First: Prioritize safety features and structural enhancements to ensure the converted classic car is reliable and secure. - Performance Optimization: Fine-tune the electric powertrain to deliver a satisfying and responsive driving experience that meets the owner’s expectations. - Sustainability: Embrace the sustainability goals of the conversion, contributing to reduced emissions and environmental impact. At Revival Autos, we excel in creating electric classic cars that capture the essence of the past while embracing a sustainable future. The expenses associated with converting a car to electric power exhibit significant variability, contingent upon multiple factors. The conversion process entails replacing the conventional internal combustion engine with an electric motor, incorporating a battery pack, and implementing various adaptations to accommodate the electric drivetrain. Below, we delve into the pivotal factors that exert influence over the cost of such a conversion: - Vehicle Type: The make and model of your car influence conversion costs; smaller and lighter vehicles are generally more budget-friendly to convert. - Battery Pack: The battery pack is a major expense; lithium-ion batteries, common in EVs, can be costly, with size and capacity also affecting the price. - Electric Motor: Motor type and size vary in price; high-performance or specialized motors may come at a premium. - Range Requirements: Longer range demands a larger, pricier battery, while shorter ranges can use smaller, more economical ones. - Charging Infrastructure: If necessary, consider the cost of installing a charging station at home or work. - Labor and Expertise: Skilled technicians in EV conversions may come at a higher price, impacting overall costs. - Upgrades and Modifications: Vehicle-specific upgrades, like suspension or cooling system changes, may be needed, adding expenses. - Safety Features: Safety components like emergency disconnects contribute to costs. - Modern Amenities: Integrating modern features adds to expenses, including touchscreen infotainment or safety tech. - Regulatory and Certification: Meeting safety and emissions standards may incur additional regulatory and certification costs. - DIY vs. Professional: DIY conversions save on labor but are challenging; professional conversions ensure reliability but are costlier. - Component Quality: Component quality, like the motor or battery, affects overall cost and performance. Providing an exact cost for an electric car conversion can be challenging due to various factors. However, you can expect costs to start at around $5,000 for a basic DIY conversion. But this conversion will be with used or modest quality components. Conversely professional conversion with high quality components and modifications can cost upto $20,000 to $30,00. It is crucial to budget according to your specific project’s requirements and goals. Electric Car Conversion Kit Conversion kits encompass extensive assortments of components, parts, and guidelines meticulously crafted to metamorphose a conventional vehicle. This is usually equipped with an internal combustion engine (ICE) that convert it into a dynamic electric vehicle. These kits empower both individuals and workshops to embark on the electrifying journey of vehicle conversion. This is how it facilitates transition from traditional gasoline or diesel propulsion to the realm of electrifying power. Here’s an overview of what conversion kits typically include and how they work: Components of Conversion Kits - Electric Motor: Conversion kits incorporate an electric motor as the new source of propulsion for the vehicle. These motors exhibit varying sizes and power outputs, tailored to suit diverse vehicle types and performance requirements. - Battery Pack: Included within the kits are battery packs or sets of batteries, designed to store and supply electrical energy to drive the electric motor. These battery packs come in differing capacities and chemistries, influencing the vehicle’s range and performance. - Controller: An integral electronic controller assumes responsibility for orchestrating the flow of electricity from the battery to the motor, governing both motor speed and power output. - Charging Components: Kits may encompass charging equipment, such as onboard chargers or external power source connectors. These components facilitate the recharging of the vehicle’s batteries. - Adapters and Mounts: Integral to the kit are a range of adapters and mounts. These components facilitate the seamless installation of the electric motor, battery pack, and controller within the existing engine bay of the vehicle. - Wiring and Cables: Conversion kits are thoughtfully equipped with all essential wiring, cables, and connectors required for secure and reliable interconnection of components. - Cooling Systems: Recognizing that electric motors and batteries generate heat during operation, kits often feature cooling systems, which may include radiators or fans, to sustain optimal operating temperatures. - Accessories: Supplementary components like throttle controllers, regenerative braking systems, instrumentation, or display panels may be incorporated within some kits. These elements enable the monitoring of vehicle performance and battery status. How Conversion Kits Work - Remove the Internal Combustion Engine (ICE): The first step in an electric vehicle conversion is to remove existing ICE. Also related components such as the fuel tank and exhaust system are removed from the vehicle. - Install Electric Components: After the ICE is removed. Other components are installed. For example: electric motor, battery pack, controller and associated components are installed in the vehicle’s engine bay. - Connect and Wire: Wiring and connections are made to link all the components. It ensures proper communication and power flow. - Cooling and Safety: Cooling systems are added to manage temperatures. Safety features like emergency disconnects are installed to ensure safe operation. - Testing and Optimization: After installation, vehicle is thoroughly tested and optimized to make sure all systems work correctly and efficiently. - Charging Infrastructure: If not included in the kit vehicle owner may need to set up a charging infrastructure to recharge the electric vehicle. Conversion kits offer a cost-effective way for enthusiasts, DIYers, or shops to convert existing vehicles into electric vehicles. However, it’s essential to select a kit that matches the vehicle’s make and model and consider factors like range, performance, and regulatory compliance when undertaking an EV conversion project. High Performance Electric Car Conversion Kit. A high-performance electric car conversion kit is a specialized package of components and technology. This is designed to transform a traditional gasoline powered car into an electric vehicle with but exceptional power. For example increased speed, and acceleration. These conversion kits are ideal for enthusiasts who desire a thrilling driving experience. It also reduces their carbon footprint. Here are some key features and components typically associated with high-performance electric car conversion kits: - High-Power Electric Motor: Top-tier conversion kits are equipped with a potent electric motor renowned for its exceptional torque and acceleration capabilities. These motors excel in delivering exhilarating performance, often surpassing the capabilities of the original gasoline engine. - High-Capacity Battery Pack: These kits feature an ample high-capacity battery pack designed to meet the elevated power requirements. These batteries possess the capability to store a substantial amount of energy, facilitating extended driving ranges and rapid acceleration. - Performance Controller: A performance-centric controller assumes a pivotal role in managing the electric motor’s power output, ensuring precise control over acceleration and speed. These controllers often offer programmability for fine-tuning the vehicle’s performance characteristics. - Advanced Cooling Systems: High-performance conversions demand efficient cooling systems to effectively manage the heat generated by the electric motor and battery pack during intense driving. This may encompass liquid cooling or advanced air cooling solutions. - Enhanced Suspension and Handling: Certain kits may incorporate enhanced suspension components and chassis adjustments to elevate the vehicle’s handling, stability, and cornering capabilities. - Performance Tires and Wheels: The package may encompass high-performance tires and wheels meticulously designed to optimize traction and road grip, effectively harnessing the increased power. - Regenerative Braking: Many top-tier conversion kits integrate regenerative braking systems that capture and convert energy during braking, providing additional power and extending the vehicle’s range. - Optimized Gear Ratios: Gear ratio adjustments may be undertaken to maximize the electric motor’s efficiency and power delivery, enhancing overall performance. - Customized Tuning: These kits offer the flexibility of tailored tuning to align with the driver’s preferences, allowing adjustments in power delivery, acceleration, and overall performance. - Safety Features: Safety remains paramount in high-performance conversions, featuring elements such as emergency disconnects and advanced braking systems to ensure secure operation. - Performance Monitoring: Kits may include instrumentation and displays that empower drivers to monitor critical performance metrics, encompassing power output, battery status, and efficiency. It’s crucial to emphasize that the price of high-performance electric car conversion kits exhibits significant variability, contingent upon factors such as the vehicle’s make and model, the specific components encompassed, and the extent of desired customization. These kits may span from around $15,000 to $40,000 or even higher, exclusive of installation expenses. Moreover, for optimal performance and safety, it’s advisable to enlist the services of skilled technicians for professional installation. Electric classic cars vs. Gasoline Counterparts In the world of classic cars, a fascinating shift is taking place. Electric classic cars are emerging as contenders to their traditional gasoline-powered counterparts. In this chapter, we’ll conduct a comparative analysis to explore the differences, advantages, and considerations of electric classic cars in contrast to their gasoline counterparts. Electric classic cars - Zero Emissions: Electric classic cars produce zero tailpipe emissions, contributing to improved air quality and reduced greenhouse gas emissions. - Reduced Carbon Footprint: They rely on electricity, which can be generated from renewable sources, further decreasing their environmental impact. - Lower Noise Pollution: Electric motors operate quietly, reducing noise pollution in urban areas. - Emissions: Traditional classics emit pollutants like CO2, NOx, and particulate matter, contributing to air pollution and climate change. - Fossil Fuels: Gasoline classics depend on fossil fuels, perpetuating the use of non-renewable resources. - Noise: Traditional engines are noisier, potentially impacting the urban soundscape. Electric classic cars - Lower Operating Costs: Electric classic cars have fewer moving parts, resulting in reduced maintenance expenses. - Energy Efficiency: They are highly energy-efficient, translating to more miles traveled per unit of energy consumed. - Potential Incentives: In some regions, incentives may be available to promote electric vehicle adoption, reducing ownership costs. - Higher Maintenance Costs: Traditional classics often require more frequent maintenance due to complex internal combustion engines. - Fuel Costs: Gasoline classics incur ongoing fuel costs. - Limited Incentives: There are typically fewer financial incentives for owning gasoline-powered vehicles. Performance and Driving Experience Electric classic cars - Instant Torque: Electric motors deliver instant torque, resulting in quick acceleration and a responsive driving experience. - Smooth Operation: They offer a quieter and smoother driving experience with minimal vibration. - Regenerative Braking: Regenerative braking systems capture energy during braking, enhancing efficiency. - Varied Performance: Performance varies among gasoline classics, with factors like engine size and tuning playing a significant role. - Engine Noise: Traditional engines produce engine noise, which some enthusiasts appreciate. - Standard Braking: Conventional braking systems do not recover energy. Maintenance and Longevity Electric classic cars - Fewer Moving Parts: Electric motors have fewer moving parts, reducing the risk of component failure. - Reduced Fluid Changes: They do not require frequent oil changes or transmission fluid replacements. - Longevity: Electric components can have a longer lifespan than traditional engine components. - Complexity: Traditional engines have more moving parts, increasing the potential for maintenance issues. - Regular Servicing: Gasoline classics require periodic oil changes, tune-ups, and maintenance. - Engine Wear: Internal combustion engines may experience wear and tear over time. Sustainability and Heritage Preservation Electric classic cars - Sustainable Legacy: Converting classic cars to electric power contributes to a sustainable automotive legacy. - Heritage Preservation: Electric conversions allow vintage car enthusiasts to keep their cherished classics on the road, preserving automotive heritage. - Historical Value: Gasoline classics are valued for their historical significance and originality. - Environmental Impact: They have a larger environmental footprint due to emissions and fossil fuel usage. Electric classic cars and gasoline classics each have their unique characteristics, advantages, and considerations. The shift toward electric classic cars represents a progressive move towards sustainability without compromising on the timeless charm of classic automobiles. As technology advances, electric classic cars continue to gain prominence, offering classic car enthusiasts a greener and more eco-conscious way to enjoy the past while embracing the technology of the future. See Table below: Comparison table highlighting the key differences between electric classic cars and their gasoline counterparts: Aspect | Electric classic cars | Gasoline Classic Cars | Environmental Impact | – Zero tailpipe emissions. | – Emissions contribute to air pollution. | | – Reduced carbon footprint with | – Dependence on fossil fuels. | | potential for renewable energy use. | – Emissions include CO2, NOx, and more. | Cost-Efficiency | – Lower operating costs due to fewer | – Higher maintenance costs with | | moving parts. | more frequent servicing. | | – Energy-efficient, lower fuel costs. | – Ongoing fuel expenses. | | – Potential incentives and tax benefits. | – Fewer financial incentives. | Performance & Experience | – Instant torque for quick acceleration. | – Varied performance depending on engine. | | – Smooth, quiet operation with minimal | – Engine noise and vibration. | | vibration. | – Standard braking system. | Maintenance & Longevity | – Fewer moving parts, reducing risk of | – More moving parts, increasing potential | | component failure. | for maintenance issues. | | – Reduced fluid changes (no oil, | – Regular oil changes, tune-ups, and | | transmission fluid). | maintenance required. | | – Longer lifespan for electric | – Internal combustion engines may wear | | components. | and tear over time. | Sustainability & Heritage Preservation | – Contributes to sustainable legacy. | – Valued for historical significance. | – Preserves automotive heritage. | – Environmental footprint due to emissions. | | Range & Charging | – Limited range per charge. | – Longer range with a full tank of fuel. | | – Requires charging infrastructure. | – Widespread availability of gasoline. | Refueling & Convenience | – Charging time varies (standard home charger or fast charger options). | – Quick refueling at gasoline stations. | | – Established refueling infrastructure. | | | – Home charging may require installation | – Convenient access to gasoline. | Resale Value | – Growing interest, potential for appreciation as technology advances. | – Established collector market. | | – Historical value and originality. | | Conversion Costs | – Initial conversion cost can be | – Varies depending on the condition of | | significant but decreasing. | the classic car and desired upgrades. | Driving Sound | – Quiet operation with minimal noise. | – Engine noise and exhaust notes. | Regulatory Compliance | – Subject to local EV regulations. | – Compliance with classic car regulations. | Ownership Experience | – Modern amenities (infotainment, climate control, safety features). | – Classic driving experience with original features and mechanical systems. | Future Potential | – Advancing technology and expanding market for electric classics. | – Preservation of originality and historical value. | Please note that the specifics of each comparison may vary depending on the make and model of the classic cars and the nature of the electric conversion. This table provides a general overview of the key distinctions between the two types of classic cars. Best Practices and Strategies Tips for successful electric classic car conversion Converting a classic car to electric power is a scrupulous process. It requires careful planning and execution. To ensure successful conversion, we have compiled full set of best practices and tips that can guide you through the journey: 1. Thorough Research - Conduct extensive research on electric classic car conversions. - Explore available conversion kits and components. - Join online forums or communities to connect with experienced enthusiasts. 2. Select the Right Vehicle - Choose a classic car that aligns with your conversion goals. - Assess the vehicle’s structural condition and compatibility for electric conversion. 3. Safety First - Prioritize safety during the conversion process. - Ensure structural enhancements to handle the additional weight of electric components. 4. Professional Expertise - Seek the assistance of experienced professionals or conversion specialists. - Their expertise can help overcome technical challenges and ensure a high-quality conversion. 5. Quality Components - Invest in high-quality electric components, including the motor, batteries, and controller. - Quality components contribute to a reliable and efficient conversion. 6. Battery Placement - Carefully plan the placement of batteries for balanced weight distribution. - Consider utilizing space in the trunk, under the hood, or along the chassis. 7. Charging Infrastructure - Assess your charging needs and install a suitable charging system. - Ensure compatibility with your electric classic car. 8. Electrical Wiring - Pay meticulous attention to electrical wiring to guarantee safe and reliable operation. - Ground the system properly and include safety features like disconnect switches. 9. Testing and Fine-Tuning - Thoroughly test the converted classic car. - Fine-tune the system for optimal performance, addressing any issues that arise. 10. Regulatory Compliance - Familiarize yourself with local regulations and safety standards. - Complete any required inspections or certifications. Maintenance and Repair of Electric classic cars - Routine Check-ups: Regular inspections are crucial for identifying potential issues. Check the battery, wiring, and charging system to ensure optimal performance. - Battery Care: Maintain battery health by avoiding deep discharges. Charge your car regularly and keep it stored in a cool, dry place when not in use. - Tire Maintenance: Monitor tire pressure and alignment to enhance energy efficiency and ensure a smooth ride. - Brake System: Inspect and service the brakes regularly to ensure safety. Electric classics are known for their instant torque, making efficient brakes crucial. - Cooling System: Prevent overheating by checking the cooling system and radiator. Proper cooling is vital for electric motor longevity. - Wiring and Electronics: Regularly inspect wiring and electronics to prevent shorts or malfunctions. Seek professional help for complex electrical issues. - Spare Parts: Locate reliable suppliers of classic electric car parts. Original or refurbished components can maintain authenticity and value. - Professional Assistance: When in doubt or facing complex issues, consult an experienced electric classic car mechanic to ensure proper repairs. - Upgrading Options: Explore modern upgrades to enhance performance and efficiency, such as improved batteries or regenerative braking systems. - Documentation: Maintain a comprehensive log of maintenance and repairs. This can increase the value of your classic electric car when selling it. Sustainable Ownership Strategies Owning an electric classic car offers an opportunity to adopt sustainable practices and contribute to a greener future. Here are strategies to make your ownership experience more sustainable: 1. Eco-Friendly Charging - Opt for renewable energy sources when charging your electric classic car. - Consider installing solar panels at home to generate clean electricity. 2. Regular Maintenance - Schedule regular maintenance checks to ensure the electric components are in top condition. - Address any issues promptly to maintain efficiency. 3. Drive Responsibly - Embrace eco-conscious driving habits, such as smooth acceleration and regenerative braking. - Maximize the efficiency of your electric classic car. 4. Community Engagement - Connect with local electric vehicle enthusiasts and share experiences. - Promote sustainable practices and educate others about electric classic cars. 5. Environmental Stewardship - Support environmental initiatives and organizations focused on sustainability. - Use your electric classic car as a symbol of responsible transportation. By following these best practices and adopting sustainable ownership strategies, you can maximize the benefits of your electric classic car while contributing to a cleaner and more eco-conscious automotive future. Importance and Role The Importance of Electric classic cars in Modern Eco-Conscious Times In an era marked by growing environmental awareness and a shift towards sustainable living, electric classic cars play a significant role in redefining the automotive landscape. At Revival Autos, we recognize the importance of these remarkable vehicles in the context of modern eco-conscious times. 1. Reducing Environmental Impact Electric classic cars hold the potential to significantly reduce the automotive industry’s environmental impact. By converting cherished classics into zero-emission electric vehicles (EVs), we can lower carbon emissions and mitigate air pollution, contributing to a greener planet. 2. Preserving Automotive Heritage Preservation of automotive heritage is at the heart of what we do at Revival Autos. Electric classic cars allow enthusiasts to keep their beloved vintage vehicles on the road while aligning with contemporary eco-friendly ethos. These conversions represent a bridge between automotive history and a sustainable future. 3. Cultural Significance Classic cars hold a special place in the hearts of enthusiasts worldwide. They embody nostalgia, craftsmanship, and a connection to bygone eras. Electric classic cars preserve this cultural significance while embracing cutting-edge technology and sustainable practices. 4. Inspiring Innovation The pursuit of electric classic car conversions has spurred innovation in the automotive industry. It has led to advancements in electric powertrains, battery technology, and sustainable practices. This innovation extends beyond conversions, influencing the development of modern electric vehicles. Preserving Automotive Heritage and Cultural Significance Revival Autos is committed to preserving automotive heritage and cultural significance through the conversion of classic cars into electric classics. Our approach prioritizes: – Maintaining Aesthetics - We ensure that the charm and aesthetics of classic cars are preserved during the conversion process. - The original look and feel of these vehicles remain intact, allowing owners to relish the nostalgia. – Heritage Appreciation - Electric classic cars provide a unique opportunity for future generations to appreciate and understand automotive history. - By keeping these classics on the road, we ensure that their stories continue to be told. – Environmental Responsibility - Revival Autos takes a proactive stance in reducing the environmental footprint of classic cars. - We are committed to the responsible conversion of these vehicles, aligning with our eco-conscious times. – Sustainable Legacy - Our work with electric classic cars is not just about the present; it’s about leaving a sustainable legacy for the future. - We believe in the coexistence of automotive history and modern sustainability. Pros and Cons Comprehensive List of Pros and Cons of Electric classic cars Here is a comprehensive list of the pros and cons to help you make an informed decision about owning or converting to an electric classic car: Pros of Electric classic cars - Environmental Benefits: - Zero tailpipe emissions, contributing to improved air quality. - Reduced carbon footprint, especially with renewable energy sources. - Decreased noise pollution in urban areas due to quiet electric motors. - Lower operating costs compared to gasoline classics, with fewer moving parts. - Energy efficiency translates to more miles traveled per unit of energy consumed. - Potential financial incentives and tax benefits in some regions. - Performance and Driving Experience: - Instant torque for quick acceleration and a responsive driving experience. - Smooth, quiet operation with minimal vibration. - Regenerative braking systems capture energy during braking for enhanced efficiency. - Maintenance and Longevity: - Fewer moving parts reduce the risk of component failure. - Reduced need for fluid changes, such as oil and transmission fluid. - Electric components may have a longer lifespan compared to traditional engine components. - Sustainability and Heritage Preservation: - Contributes to a sustainable automotive legacy by reducing emissions. - Allows vintage car enthusiasts to keep their classics on the road, preserving automotive heritage. - Aligns with eco-conscious values without compromising on classic car aesthetics. - Lower Operating Costs: - Reduced maintenance expenses due to simpler electric powertrains. - Lower fuel costs or even free charging through renewable energy sources. - Modern Amenities: - Integration of modern amenities like touchscreen infotainment systems, climate control, and advanced safety features. - Combines vintage charm with contemporary convenience. Cons of Electric classic cars - Limited Range: - Limited range per charge compared to the long-range capability of gasoline classics. - May require planning for longer trips and access to charging infrastructure. - Charging Infrastructure: - Dependence on charging infrastructure availability, which may be less widespread than gasoline refueling stations. - Home charging may require installation and added costs. - Higher Initial Conversion Costs: - Initial conversion costs can be significant, including the purchase of electric components and conversion labor. - Costs may vary depending on the classic car’s condition and desired upgrades. - Sound Experience: - Quieter operation may be perceived as a drawback by some enthusiasts who appreciate the engine noise and exhaust notes of traditional classics. - Regulatory Compliance: - Subject to local electric vehicle regulations, which may vary by region. - Compliance with safety standards and inspections may be required. - Heritage Modification: - Electric conversions alter the original mechanics of classic cars, potentially impacting their historical value. - Some collectors may prefer gasoline classics in their original state. - Limited Availability: - Electric classic cars are a niche market, and finding ready-made conversions can be challenging. - May require time and effort to locate suitable classic cars for conversion. In weighing these pros and cons, enthusiasts and collectors must consider their priorities, values, and driving habits to determine whether electric classic cars align with their automotive preferences and sustainability goals. Table summarizing the pros and cons of electric classic cars: Pros of Electric classic cars | Cons of Electric classic cars | 1. Environmental Benefits | 1. Limited Range | – Zero emissions | – Dependence on charging infrastructure | – Reduced carbon footprint | – Higher initial conversion costs | – Decreased noise pollution | – Quieter operation may be a drawback | | – Regulatory compliance may be needed | | – Heritage modification | | – Limited availability | 2. Cost-Efficiency | 2. Charging Infrastructure | – Lower operating costs | – Dependence on charging infrastructure | – Energy efficiency | – Home charging may require installation | – Potential financial incentives | | 3. Performance and Driving Experience | 3. Higher Initial Conversion Costs | – Instant torque | – Costs vary depending on the condition and desired upgrades. | – Smooth, quiet operation | | – Regenerative braking systems | | 4. Maintenance and Longevity | 4. Sound Experience | – Fewer moving parts | – Quieter operation may be perceived as a drawback by some enthusiasts | – Reduced need for fluid changes | | – Longer lifespan of electric components | | 5. Sustainability and Heritage Preservation | 5. Regulatory Compliance | – Modern amenities integration | – Subject to local electric vehicle regulations | – Contributes to sustainable legacy | – Compliance with safety standards and inspections may be required | – Preserves automotive heritage | | – Lower operating costs | In assessing whether electric classic cars are the right choice, individuals should consider these pros and cons based on their preferences, driving habits, and sustainability goals. Key Performance Indicators (KPIs) for Electric classic cars When it comes to electric classic cars, measuring success involves evaluating various aspects to ensure your investment aligns with your goals and expectations. Key Performance Indicators (KPIs) provide valuable insights into the performance and efficiency of these unique vehicles. In this chapter, we explore the essential KPIs to consider for your electric classic car journey. 1. Range and Efficiency - Electric Range: Measure the distance your electric classic car can travel on a single charge. A higher range indicates greater efficiency and convenience for longer drives. - Efficiency Metrics: Track efficiency metrics such as miles per kilowatt-hour (miles/kWh) to gauge how effectively your car uses energy. 2. Charging Speed and Infrastructure - Charging Time: Monitor how long it takes to charge your electric classic car, both at home and using public charging stations. - Charging Infrastructure: Assess the availability and accessibility of charging stations in your area, ensuring they align with your travel needs. 3. Operating Costs - Energy Costs: Calculate the cost of electricity required for your electric classic car. Compare it to the expenses associated with gasoline classics to determine cost savings. - Maintenance Costs: Track maintenance expenses, including routine check-ups, repairs, and component replacements. Electric classics often have lower maintenance costs due to fewer moving parts. 4. Performance and Driving Experience - Acceleration: Measure acceleration times to assess the vehicle’s performance. Electric classics are known for instant torque, resulting in impressive acceleration. - Driving Range: Determine how far you can comfortably drive on a single charge without range anxiety. 5. Environmental Impact - Carbon Footprint: Calculate the carbon emissions reduction achieved by driving an electric classic car compared to a gasoline-powered classic. Monitor your contribution to a greener planet. - Noise Reduction: Assess the reduction in noise pollution and vibrations associated with electric classic cars. Consider the impact on your local environment. 6. Battery Health and Longevity - State of Health (SoH): Monitor the health of your electric car’s battery over time. SoH provides insights into its capacity and overall condition. - Battery Longevity: Estimate the lifespan of your battery and plan for potential replacements or upgrades. 7. Heritage Preservation - Historical Value: Evaluate the historical significance and originality of your electric classic car. Consider how the conversion impacts its collector’s value. - Cultural Impact: Assess the cultural and societal impact of your electric classic car in terms of preserving automotive heritage and promoting eco-conscious values. 8. Owner Satisfaction - Feedback and Surveys: Gather feedback from owners of electric classic cars to assess overall satisfaction, including driving experience, reliability, and eco-friendliness. - Community Engagement: Engage with the electric classic car community to share experiences, best practices, and insights on ownership satisfaction. 9. Resale Value and Appreciation - Resale Value: Monitor the resale value of electric classic cars in the market. Determine whether your investment appreciates over time. - Future Demand: Predict future demand for electric classics and assess their potential as collectibles. 10. Cost of Conversion vs. Savings - Conversion Costs: Compare the initial conversion costs with the savings accrued over time due to lower operating and maintenance costs. - Return on Investment (ROI): Calculate the ROI of converting a classic car to electric power by considering financial benefits, resale value, and sustainability. By tracking these KPIs, you can gain valuable insights into the performance, efficiency, and overall impact of your electric classic car. This data empowers you to make informed decisions, optimize your ownership experience, and contribute positively to a more sustainable automotive future. History and Future The Historical Evolution of the Electric Classic Car Movement The electric classic car movement represents a fascinating intersection of nostalgia and innovation. In this chapter, we delve into the historical evolution of this captivating movement, tracing its roots and significant milestones. Early Experiments: The Birth of Electric Vehicles The idea of electric propulsion for vehicles is not a recent development. In fact, it predates the internal combustion engine. In the late 19th and early 20th centuries, electric vehicles were already on the roads. They were favored for their quiet operation and lack of exhaust emissions. This made them ideal for urban transportation. Decline and Resurgence: Mid-20th Century to Early 21st Century The mid 20th century saw a decline in the popularity of electric vehicles. This was because gasoline powered cars took center stage. Gasoline offered greater range and faster refueling. But electric vehicles faced limitations in terms of battery technology and charging infrastructure. However, as environmental concerns grew in the late 20th century, the concept of electric mobility made a resurgence. This resurgence laid the foundation for the electric classic car movement we see today. The Rise of electric classic cars: Early 21st Century The early 21st century marked a significant turning point for electric classic cars. Several key developments contributed to their emergence: - EV Technology Advancements: Advances in battery technology, electric motors, and power electronics improved the performance and range of electric vehicles. - Environmental Awareness: Growing environmental awareness and concerns about air quality and climate change prompted a shift towards cleaner transportation options. - Enthusiast-Driven Innovation: Enthusiasts and restoration experts recognized the potential of retrofitting classic cars with electric drivetrains. This grassroots movement gained momentum. - Conversion Specialists: Companies specializing in electric classic car conversions emerged, offering expertise and solutions for enthusiasts seeking a sustainable twist on their vintage rides. Promising Future Developments in Electric classic cars The future of electric classic cars is promising. It offers several exciting developments: - Advanced Battery Technology: Continued advancements in battery technology will lead to lighter, efficient and longer-lasting batteries. This will enhance range and performance of electric classic cars. - Increased Conversion Options: As demand grows, more classic car models will become viable candidates for electric conversion, providing enthusiasts with a wider selection. - Heritage Preservation: Efforts to preserve the historical value of classic cars during conversions will lead to improved methods and techniques that maintain original aesthetics. - Charging Infrastructure Expansion: The expansion of charging infrastructure will make it easier for electric classic car owners to travel longer distances and explore new routes. - Collectible Status: Electric classic cars may attain collectible status, with unique historical significance as pioneers of the sustainable automotive movement. - Integration of Modern Amenities: Conversions will increasingly incorporate modern amenities while retaining the classic car’s charm, offering a balance of nostalgia and convenience. - Cultural Impact: Electric classic cars will continue to influence the automotive industry and shape cultural perceptions of sustainability and heritage preservation. Recommendations and Considerations Recommendations for Classic Car Enthusiasts For classic car enthusiasts considering the transition to electric classics, a few key recommendations can enhance your experience and ensure a successful conversion: 1. Research and Consultation - Thorough Research: Begin by researching electric classic cars extensively. Understand the conversion process, available options, and associated costs. - Consult Experts: Seek advice from experts in the field of electric classic car conversions. Their insights can help you make informed decisions. 2. Vehicle Selection - Choose Wisely: Select a classic car that holds personal significance and aligns with your conversion goals. Consider the availability of conversion kits for your chosen model. - Condition Matters: Evaluate the condition of the classic car before conversion. Restoration may be necessary to ensure a solid foundation. 3. Conversion Process - Quality Conversion: Opt for a reputable conversion specialist like Revival Autos. Ensure the conversion process maintains the aesthetics and historical value of your classic car. - Safety and Compliance: Verify that the converted vehicle complies with safety standards and local regulations for electric vehicles. 4. Charging Infrastructure - Home Charging: If feasible, set up home charging infrastructure for convenience. Consider the installation cost and required permits. - Plan Routes: Plan your routes to include charging stations, especially for longer journeys. Familiarize yourself with charging network options. 5. Ownership Experience - Maintenance Schedule: Adhere to the recommended maintenance schedule for your electric classic car. Regular checks and battery care are essential. - Join Communities: Connect with electric classic car communities and forums. Share experiences, gather tips, and engage with like-minded enthusiasts. Essential Considerations for Potential Buyers If you’re considering purchasing an electric classic car, whether converted or factory-made, these considerations will help you make an informed decision: 1. Budget and Financing - Set a Budget: Determine your budget, factoring in the purchase price, potential conversion costs, and any additional modifications. - Financing Options: Explore financing options, as electric classics may have a higher initial cost compared to their gasoline counterparts. 2. Conversion vs. Factory-Made - Conversion or Factory-Made: Decide whether you prefer a converted classic or a factory-made electric classic car. Each option has its unique features and considerations. 3. Range and Usage - Daily Use: Assess your daily driving needs and determine if the electric classic car’s range meets your requirements. - Usage Patterns: Consider how often you’ll use the car for long-distance travel and ensure the range aligns with your travel plans. 4. Charging Infrastructure - Charging Availability: Research the availability of charging infrastructure in your area and along your typical routes. - Home Charging: If you plan to charge at home, evaluate the feasibility and costs of installing a home charging station. 5. Maintenance and Repairs - Maintenance Costs: Inquire about maintenance costs and schedules for the specific electric classic car model you’re interested in. - Repairs and Parts: Ensure that replacement parts and repair services are accessible and reasonably priced. 6. Historical and Collector Value - Historical Value: Consider how the conversion or factory production impacts the historical and collector value of the car. - Collector Status: Research the potential future collector status of the electric classic car model you’re considering. 7. Environmental Impact - Eco-Consciousness: Assess how owning an electric classic car aligns with your environmental values and sustainability goals. - Carbon Emissions: Compare the emissions reduction achieved with an electric classic car versus a gasoline classic. By carefully considering these recommendations and essential factors, classic car enthusiasts and potential buyers can embark on their electric classic car journey with confidence, ensuring a rewarding and sustainable automotive experience. Conversion Process Details Stages and Types of Electric Classic Car Conversion The conversion of a classic car to electric power typically follows these key stages: 1. Vehicle Inspection and Evaluation - Assessment: The process begins with a thorough evaluation of the classic car’s condition. Technicians inspect the chassis, body, suspension, and existing drivetrain components. - Condition Report: A condition report is generated, outlining any necessary repairs, restoration work, or upgrades needed before conversion. 2. Component Selection and Sourcing - Selecting Components: Based on the evaluation, suitable electric components are chosen. This includes the electric motor, battery pack, power electronics, and charging system. - Sourcing: Components may be sourced from reputable manufacturers or suppliers specializing in electric classic car conversions. 3. Removal of Internal Combustion Engine - Engine Removal: The internal combustion engine, along with associated components such as the transmission and exhaust system, is carefully removed from the classic car. - Drivetrain Preparation: The drivetrain is prepared for the installation of the electric motor. 4. Electric Motor Installation - Motor Placement: The electric motor is strategically positioned within the classic car’s engine bay or another suitable location, depending on the conversion design. - Mounting and Alignment: Precise mounting and alignment are crucial to ensure proper power transmission to the wheels. 5. Battery Integration - Battery Pack Installation: The battery pack is installed in a secure location, often in the trunk or under the vehicle’s floor, to optimize weight distribution and safety. - Wiring and Connections: Electrical wiring and connections are meticulously laid out to link the battery pack with the motor and other components. 6. Power Electronics and Control Systems - Inverter and Controller: The power electronics, including the inverter and controller, are installed to manage the flow of electricity between the battery pack and motor. - Control Programming: Custom software and control systems are programmed to ensure the efficient operation of the electric powertrain. 7. Safety and Testing - Safety Measures: Safety features, including thermal management systems and emergency disconnects, are integrated to safeguard the electric classic car. - Testing: Rigorous testing is conducted to ensure the functionality and safety of the converted vehicle. This includes performance tests, battery checks, and safety assessments. 8. Aesthetic and Interior Considerations - Aesthetics: Efforts are made to maintain the classic car’s original aesthetics, including preserving the exterior and interior design. Interior Components: The conversion may involve modifications to accommodate modern amenities while retaining the classic car’s charm. Types of Conversion Electric classic car conversions can vary in complexity and approach. Here are some common types: 1. Full Conversion - Complete Overhaul: In a full conversion, the classic car undergoes a comprehensive transformation, replacing all internal combustion engine components with electric counterparts. 2. Partial Conversion - Selective Upgrades: In a partial conversion, specific components like the engine may be replaced with electric alternatives while retaining other original parts. 3. Factory-Made Electric Classics - Factory Production: Some companies produce electric classic cars from the ground up, offering factory-made electric classics with modern amenities and components. Step-by-Step Process Flow for Conversion Converting a classic car to electric power involves a systematic process flow: - Assessment and Evaluation: Evaluate the classic car’s condition and document any required repairs or upgrades. - Component Selection: Choose the electric motor, battery pack, and other components based on the classic car’s specifications. - Engine Removal: Carefully remove the internal combustion engine and associated components. - Electric Motor Installation: Position the electric motor and ensure proper alignment. - Battery Integration: Install the battery pack securely and establish electrical connections. - Power Electronics and Control: Install power electronics components and program control systems. - Safety Measures: Integrate safety features and perform thorough testing for safety and functionality. - Aesthetic Considerations: Modify the interior and exterior as necessary while preserving the classic car’s character. Methodologies for Achieving a Seamless Conversion Achieving a seamless conversion involves several methodologies: - Preserving Aesthetics: Pay meticulous attention to preserving the classic car’s original aesthetics, including exterior design and interior features. - Maintaining Historical Value: Ensure that the conversion process does not compromise the historical or collector’s value of the classic car. - Alignment with Regulations: Comply with local regulations and safety standards for electric vehicles. - Quality Control: Implement rigorous quality control measures during each stage of the conversion process. - Safety First: Prioritize safety by incorporating emergency disconnects, thermal management systems, and effective fire suppression systems. By following these stages, considering various types of conversion, and implementing best practices, classic car enthusiasts can embark on a successful journey toward owning a seamless electric classic car while preserving the charm and heritage of their beloved vehicles. Future Trends in Electric classic cars Bridging Past and Future: Technology and Software in Electric Classic Car Conversion In the world of classic cars, where nostalgia meets innovation, technology and software play pivotal roles in the conversion process. Revival Autos seamlessly integrates cutting-edge technology to breathe new life into classic automobiles, transforming them into electric classics that bridge the past and the future. The Essence of Technology in Conversion At Revival Autos, technology is not just a tool; it’s the driving force behind our electric classic car conversions. Here’s how it shapes our conversion process: 1. Precision Component Selection - Advanced Simulation: We employ advanced simulation software to select the most suitable components, ensuring optimal performance and efficiency. This includes choosing the electric motor, battery pack, and power electronics. - Performance Modeling: Technology allows us to create detailed performance models, predicting how the converted classic car will handle various driving conditions and loads. 2. Customized Control Systems - Digital Precision: Our engineers leverage digital control systems to fine-tune the electric powertrain’s performance. This customization ensures that the converted classic car operates seamlessly and efficiently. - Real-time Monitoring: Revival Autos’s conversion process includes real-time monitoring capabilities, allowing us to track the vehicle’s performance and make adjustments as needed. 3. Software Optimization - Efficiency Algorithms: Sophisticated algorithms are employed to optimize power distribution and battery management, enhancing both performance and range. - Regenerative Braking: We implement regenerative braking software, enabling the classic car to recapture energy during deceleration, thus increasing overall efficiency. 4. Safety and Diagnostics - Advanced Diagnostics: Our conversion process integrates advanced diagnostic software to identify and address potential issues before they become critical, ensuring the long-term reliability of the electric classic car. - Emergency Protocols: In the realm of safety, technology enables the implementation of emergency protocols, such as rapid battery disconnection in the event of a malfunction. The Marriage of Classic Aesthetics and Modern Technology One of Revival Autos’s hallmarks is the seamless blend of classic aesthetics with modern technology. Here’s how we achieve this: 1. Aesthetic Preservation - Digital Prototyping: We employ digital prototyping techniques to design custom components that seamlessly integrate with the classic car’s existing aesthetics. - 3D Printing: 3D printing technology allows us to create bespoke parts and components that match the classic car’s original design, maintaining its historical integrity. 2. Interior Comfort and Convenience - Infotainment Integration: Revival Autos offers the option to integrate modern infotainment systems into the classic car’s interior while preserving the vintage appeal. - Climate Control:* We utilize advanced climate control systems to ensure passenger comfort, adapting them to the classic car’s cabin. 3. User-Friendly Interface - Intuitive Interface: Technology also extends to the user interface, where we design intuitive control panels and displays for the driver’s convenience. - Seamless Connectivity: Revival Autos’s conversions often include connectivity features, allowing drivers to pair their smartphones and access navigation and entertainment services. The Future of Electric Classic Car Technology As technology continues to advance, so does the potential for electric classic cars. Revival Autos is committed to staying at the forefront of innovation in the following ways: 1. Battery Technology - Enhanced Energy Density: We closely monitor developments in battery technology to offer our customers improved energy density, resulting in longer ranges and increased performance. - Fast Charging: Our dedication to technology extends to fast-charging solutions, reducing charging times and enhancing the practicality of electric classic cars. 2. Autonomous Features - Safety Innovations: Revival Autos explores autonomous safety features that can be integrated into electric classic cars, enhancing driver safety and convenience. - Advanced Driver Assistance: We keep an eye on advancements in driver assistance technology, evaluating how these features can be tailored to the unique needs of classic car enthusiasts. 3. Sustainable Materials - Eco-Friendly Choices: Revival Autos continuously seeks sustainable materials and manufacturing processes to reduce our environmental footprint. - Recyclability: We explore options for making electric classic car components more recyclable, contributing to a greener future. Technology and software are not just tools at Revival Autos; they are the bridge that connects the timeless allure of classic cars with the innovation of the electric era. Our commitment to staying on the cutting edge ensures that our conversions are not just a step into the future but a leap into the future of classic motoring. Embracing the Future: The Significance and Prospects of Electric classic cars As we draw the curtain on this exhilarating journey through the world of electric classic cars, it’s essential to reflect on the remarkable significance and exciting prospects that lie ahead. Revival Autos, as a pioneer in the field, is proud to have been your guide on this electrifying adventure. Summarizing the Journey Our journey began with an exploration of the history and evolution of electric classic cars, tracing their roots from the early 21st century to their current status as icons of sustainability. We discovered how these timeless vehicles have transformed, offering both environmental benefits and cost-efficiency without compromising on performance. The process of converting a classic car to electric power was unveiled, showcasing the meticulous stages involved, the various types of conversions, and the methodologies that ensure a seamless transition. Revival Autos’s commitment to preserving aesthetics and integrating modern technology was at the forefront of this transformation. We embarked on a comparative analysis, pitting electric classic cars against their gasoline counterparts. The advantages of zero emissions, lower operating costs, and impressive performance were juxtaposed with challenges such as range limitations and charging infrastructure. Best practices, strategies, and the importance of preserving automotive heritage were emphasized as essential aspects of the electric classic car experience. Revival Autos’s dedication to sustainable ownership and eco-conscious practices shone through. A comprehensive list of pros and cons laid out the benefits and considerations that classic car enthusiasts must weigh when considering an electric conversion. A detailed examination of key performance indicators shed light on how to measure the success of an electric classic car. The historical evolution of the electric classic car movement and promising future developments unveiled the growing popularity of these vehicles and the potential for even more seamless conversions and an expanding market. Revival Autos’s commitment to pushing the boundaries of innovation was highlighted. We offered recommendations for classic car enthusiasts and essential considerations for potential buyers, ensuring that the journey toward electric classic car ownership is as informed as it is exciting. The intricacies of technology integration and software in electric classic car conversion showcased how Revival Autos brings together the best of the past and the future. The marriage of classic aesthetics with modern technology forms the very essence of our conversions, offering a unique and enriching driving experience. Prospects and Future Direction The future of electric classic cars is undeniably bright. With advancements in battery technology, fast charging solutions, and potential autonomous features, the possibilities are limitless. Revival Autos is poised to lead the charge in this sustainable luxury market, delivering factory-made electric classics that redefine the industry. In conclusion, electric classic cars represent more than just a mode of transportation. They are a testament to human ingenuity, a bridge between eras, and a statement of our commitment to a sustainable future. At Revival Autos, we are not merely converting classic cars; we are revitalizing automotive history and creating a legacy that future generations will cherish. Thank you for joining us on this electrifying journey. The road ahead is filled with promise. Revival Autos is excited to be at the forefront of this remarkable transformation. Here is to the future of classic motoring where luxury meets sustainability and past meets the future. Frequently Asked Questions about Electric classic cars Electric classic cars represent an exciting fusion of vintage aesthetics and modern sustainability. As a pioneer in the field, Revival Autos understands that you may have questions about this innovative concept. In this chapter, we provide answers to some of the most frequently asked questions to help you navigate the world of electric classic cars with confidence. Electric classic cars or ECCs are a brilliant fusion of timeless automotive design and cutting-edge electric vehicle technology. They are classic cars from bygone eras that have been meticulously converted into electric vehicles. These conversions involve replacing the traditional internal combustion engine with an electric motor, and often upgrading powertrain batteries, and other components to modern electric standards while preserving vehicle’s iconic aesthetics. The benefits of Electric classic cars are manifold. Firstly, they offer charm of vintage automobiles combined with the eco friendly of electric mobility. They also provide quiet, emissions free driving experiences. It also offers lower operating costs and reduced dependence on fossil fuels. Furthermore, ECCs often exhibit impressive performance improvements and contribute to preservation of classic car heritage. Yes, Electric classic cars are environmentally friendly. By replacing internal combustion engines with electric motors ECCs eliminate carbon footprint. They are useful in reducing air pollution and greenhouse gas. This is a vital step toward combating climate change. Driving an electric classic car brings several environmental benefits. These include reduced air pollution quieter streets due to decreased noise pollution, and a lower overall carbon footprint. ECCs contribute to cleaner air quality and help conserve natural resources by reducing the demand for fossil fuels. The performance of an electric classic car can be quite impressive. Electric motors deliver instant torque providing brisk acceleration and a smooth, silent ride. ECCs often have enhanced handling and can offer a satisfying driving experience comparable or even superior to their gasoline-powered counterparts. Electric classic cars can offer competitive or superior performance compared to their gasoline-powered counterparts. They typically have excellent torque delivery, quicker acceleration and quieter operation. While car top speeds may vary, the overall driving experience in terms of power and responsiveness is often exceptional. The charging time for an electric classic car depends on several factors including vehicle’s battery capacity charging infrastructure used and state of charge when plugging in. Generally, using standard Level 2 charger it can take anywhere from a few hours to overnight to fully charge an ECC. The range of an electric classic car on a single charge varies depending on the specific vehicle and its battery capacity. Some ECCs can achieve ranges of 100 miles or more, while o rs with larger battery packs can exceed 200 miles or even more making them suitable for daily driving and longer trips. The range of an Electric Classic Car on a full charge depends on the vehicle’s battery size and efficiency. It can range from around 50 miles for smaller conversions to over 200 miles for those equipped with larger battery packs. This range is continually improving as battery technology advances. The lifespan of the battery in an Electric Classic Car can vary but is typically designed to last for many years. With proper maintenance and usage, batteries can endure 100,000 miles or more before showing significant degradation. Advances in battery technology continue to extend ir longevity. Maintaining an electric classic car is generally less complex than maintaining a traditional gasoline-powered classic car. ECCs have fewer moving parts require fewer oil changes, and have longer service intervals. However finding qualified technicians for electric components may require some effort, but it’s becoming easier as electric cars gain popularity. Electric classic cars are known for their reliability. With fewer moving parts re are fewer components that can fail compared to traditional classic cars. Electric drivetrains are robust and often require less maintenance, making ECCs a reliable choice for enthusiasts. In general Electric classic cars tend to retain or even increase in value over time. Their uniqueness, combined with growing interest in electric vehicles can make them highly sought-after by collectors. Well-executed conversions that preserve original aesthetics can fetch a premium on market. While many classic cars can be converted, it’s essential to consult with experts to determine feasibility and compatibility. Factors such as the car’s condition, structural integrity, and available space for electric components must be considered. Electric classic cars often offer impressive acceleration due to instant torque from electric motors. They can deliver quick and exhilarating performance, sometimes surpassing their gasoline counterparts. Conversion costs vary depending on the car’s make, model, and the desired features. It’s advisable to get quotes from conversion specialists to get a precise estimate. Revival Autos offers a range of conversion options to suit different budgets. The range of an electric classic car depends on the battery capacity and the type of conversion. Some electric classics can achieve competitive ranges, especially with advancements in battery technology and fast-charging solutions. In some regions, incentives may be available to promote the adoption of electric vehicles, including classics. These incentives can include tax credits, rebates, or exemptions. It’s recommended to check with local authorities for specific details and eligibility. Maintenance for electric classic cars is generally less frequent and less complicated than for gasoline counterparts. Routine maintenance includes checking the battery, electrical components, and brakes. Revival Autos provides guidelines for maintenance with every conversion. Yes, Revival Autos offers the option to integrate modern amenities like touchscreen infotainment systems, climate control, and advanced safety features while preserving the classic car’s aesthetics. We strive to create a blend of vintage charm and contemporary convenience. Charging infrastructure for electric vehicles, including classics, is expanding globally. Although there are not extensive as traditional gasoline stations, there are charging solutions available. For example, home chargers and public charging networks. The duration of a conversion project varies depending on complexity of the conversion. It can take time to check availability of components and specific requirements of the classic car. Revival Autos provides estimated project timelines during consultation phase. Revival Autos offers warranties for our conversion work and the electric components used. The specifics of the warranty will be discussed and provided to customers during the conversion process. Navigating the world of electric classic cars may raise additional questions specific to your situation. Revival Autos is here to provide guidance, expertise, and personalized solutions to ensure that your journey into electric classic car ownership is as seamless and enjoyable as possible. One notable company specializing in electric classic car conversions is “Revival Autos.” They are at the forefront of this transformative industry, known for ir expertise in preserving the timeless beauty of classic cars while upgrading m with modern electric technology. To get your classic car converted to electric you can explore specialty shops and conversion experts like “Revival Autos.” Additionally, researching local automotive electric conversion shops or seeking recommendations from classic car enthusiasts can help you find suitable options. The cost of converting a classic car to electric varies widely based on the vehicle’s make and model desired range, and the quality of components used. It is important to consult with conversion specialists like Auto Revival to get an accurate estimate for your specific project. Government incentives for converting classic cars to electric vary by region and may include tax credits, rebates or grants aimed at promoting electric vehicle adoption. Be sure to check with local and national authorities to see if any incentives apply to your conversion project. Tax incentives for converting classic cars to electric can exist in some regions. These incentives might include tax credits or deductions related to cost of the conversion. It’s advisable to consult with tax professionals or government agencies to explore potential tax benefits. The future of electric classic cars looks promising. As technology advances and battery costs decrease, more enthusiasts are likely to embrace electric conversions. This trend will likely lead to increased availability improved range, and even more faithful preservation of classic car aesthetics. Revival Autos stands at the forefront of Electric classic cars conversion industry through their commitment to excellence and innovation. They blend technical expertise with an unwavering dedication to preserving original character of classic cars while seamlessly integrating modern electric powertrains. Their conversions not only meet but exceed the expectations of classic car enthusiasts setting a high standard for future of ECCs. Revival Autos continues to pave the way for a sustainable and exhilarating future in classic car restoration and electrification. About Revival Autos Transforming Classics: An Overview of Revival Autos At Revival Autos, we specialize in a remarkable and innovative endeavor – the conversion of classic cars into electric marvels. Our unwavering commitment to excellence has earned us a reputation as a leader in the field of electric classic car conversions. In this chapter, we provide an overview of Revival Autos and our expertise in breathing new life into iconic classics. The Revival Autos Difference Revival Autos stands at the forefront of a transformative movement that combines the cherished nostalgia of classic cars with the eco-conscious power of electric vehicles. Our core mission is to preserve the timeless beauty and historical significance of classic automobiles while aligning them with modern sustainability and innovation. Our Electric Classics At Revival Autos, we take immense pride in offering a carefully curated selection of electric classic cars. Our featured electric classics include: 1. Austin Healey 100 - A Classic Icon: The Austin Healey 100 is a classic British sports car known for its timeless design and exhilarating performance. Our electric conversion breathes new life into this icon, delivering impressive power while maintaining its vintage charm. 2. Austin Healey 3000 - A British Legend: The Austin Healey 3000 is a legendary classic car that has captured the hearts of enthusiasts for generations. Our conversion ensures that this British masterpiece continues to captivate with electrifying performance. Expertise in Electric Classic Car Conversion Revival Autos’ expertise in electric classic car conversion is the cornerstone of our success. Here’s what sets us apart: 1. Meticulous Craftsmanship - Preserving Aesthetics: Our skilled craftsmen meticulously preserve the aesthetics of classic cars during conversion, ensuring that every detail, from the exterior design to the interior ambiance, remains true to the original. - Seamless Integration: We seamlessly integrate modern electric components while maintaining the classic car’s historical integrity, resulting in a harmonious blend of old and new. 2. Cutting-Edge Technology - Advanced Components: Revival Autos carefully selects and sources cutting-edge electric components, including motors, battery packs, and power electronics, to ensure optimal performance and efficiency. - Digital Precision: We leverage advanced simulation and modeling software to achieve precision in component selection, performance optimization, and safety. 3. User-Centric Approach - Modern Comforts: While preserving classic aesthetics, we offer the option to integrate modern amenities such as infotainment systems, climate control, and safety features, enhancing the overall driving experience. - Tailored Solutions: Our conversions are tailored to meet the unique preferences and requirements of classic car enthusiasts, ensuring that each converted vehicle is a reflection of its owner’s vision. 4. Safety and Reliability - Safety First: Revival Autos prioritizes safety with the integration of advanced safety features, emergency disconnects, and comprehensive diagnostic systems, providing peace of mind for owners. 5. Reliability Guaranteed - Rigorous testing and quality control measures are implemented to guarantee the reliability and longevity of our conversions. At Revival Autos, we are not merely converting classic cars. We are revitalizing automotive heritage and leading charge toward a greener and more eco conscious automotive world. Join us on this electrifying journey where luxury meets sustainability, and the past meets the future. Igniting Nostalgia, Driving Tomorrow Ready to embark on a timeless journey? Explore our collection of electric classic cars today and experience the elegance of the future. Start your electrifying adventure now!

https://revival.autos/electric-classic-cars/

en

Use Of Financial Accounting Information System For Management Decision Making. Problems And Prospects Of Local Government Finance Accounting. Case Study Of Nsukka Local Government Area Impact Of Financial Accounting On The Corporate Performance Of Business Organization. A Case Study Of Nigerian Breweries Plc Effects Of Financial Accounting Reporting On Managerial Decision Making. Effect Of Financial Accounting Reporting On The Management Of A Business. A Case Study Of Agu Bros Trading Company Limited Accounting information system as a means of Enhancing financial management of transport Company. a case study of the nigerian railway corporation Enugu Usefulness Of Financial Statement In Accessing The Performance Companies And In Guiding Investment Decisions. A Case Study Of Sunrise Flour Mill Ltd Enugu Impact Of Small And Medium Enterprises Financing On Poverty Reduction. Case Study of Nigeria Taxation As A Major Source To Government Funding. A Case Study Of Enugu State Board Of Study Of The Use Of Financial Ratios For The Assessment Of The Performance And The Profitability Of A Firm. Study Of Financial Intermediation And Resource Mobilization Implication For Economic Development. Study Of Controlling Of Customer’s Account By The Commercial Banks. A Case Study Of Citizens International Bank Ltd Strategies For Enhancing Financial Accountability In The Local Government System. Case Study Of Ikwo Local Government Area, Ebonyi State Source Of Finance For Medium Scale Industry. A Case Study Of Aluminum Manufacturing Company Alumaco Security Market As A Source Of Finance For The Public And Private Sectors. Roles Of Central Bank And Merchant Banks In Financial International Trade. A Case Study Of Cbn Enugu And Crown Merchant Bank Benin Role And Problems Of Financial Institutions To The Growth Of Small Scale Business. A Study Of Union Bank Of Nigeria Plc, Owerri, Imo State Role Of The Nigerian Agriculture And Co-operative Bank In Agricultural Financing (Problems And Prospects). Role Of Financial Statements In Investment Decisions. A Study Of Selected Banks In Enugu Metropolis, Enugu State Role Of Financial Manager In A Manufacturing Firm. A Case Study Of Emenite Limited, Emene Enugu Role Of Financial Management In A Corporate Organization. A Case Study Of Union Bank (Nig) Plc Enugu Role Of Financial Management A Corporate Orgnaisation. A Case Study Of Nicon Insurance Company Limited Enugu, Enugu State Role Of Financial Institutions In Small Scale Industrial Activities. Role Of Financial Institutions In Export Financing. A Case Study Of First Bank Of Nigeria Plc Onitsha Branch Role Of Financial Accountability In A Public Limited Company. Role Of Commercial Banks In Finance Small Scale Agricultural. A Case Study Of Udi, Awgu, Eziagu And Enugu South Role Of Central Bank Of Nigeria (C.B.N) In Agricultural Finance Development, Problems And Prospects. A Case Study Of Nigeria Agricultural Insurance Company (NAIC) Enugu – Enugu State Role Of Audit For The Proper Accountability Of Company’s Funds. A Case Study Of Department Of Petroleum Resources (Dpr Risk Management In The Financial Institution. A Case Study Of Some Selected Banks Relevance Of Financial Ratio Analysis In The Appraisal Of Small Scale business. A Case Study Of Selected Small Scale Company In Cross River State Problems Prospects And Growth Of Chequeing System. Problems Of Money Transmission In Banks. A Case Study Of United Bank For Africa Plc Problems Of Financing Government Corporations. Case Study Of Tracas Problems Facing Personal Income, The Administration In Rural Communities. A Case Study Of Ugwuaji Community In Enugu South Local Government Area Of Enugu State Problems Associated With Loan Recovery In Commercial Banks. Problems And Prospects Of Revenue Generation In Local Government Areas. Problem Of Financing International Trade. Post-Reform Appraisal Of Commercial Bank Investment And Lending Activities. A Case Study Of Diamond Bank And Afribank Plc Place Of Proper And Adequate Financial Record Keeping In The Success Of Small Scale Business. Overview Of The Risks Associated With Bank Lending In The Banking Sector. Financial System As The Prime Mover Of Economic Activities. As Study Of Nigerian Bank For Commerce And Industry In Enugu State National Effects Of Exchange Rate Changes On Foreign Debt Service. Motivation Of Customers As Essential Tool In Financial Institution. Marketing Of Commercial Bank’s Services. Management Of Risk In Agricultural Financing. a case study of nigeria agricultural & Commerce bank plc, enugu branch Management Of Public Funds In Industries. A Case Study Of Life Breweries Limited Aba Locational Factors Influencing The Marketing Of Financial Service. A Case Of Study Lagos And Aba Markets Loan Syndication As An Alternative Business Financing Strategy. A Case Study Of Union Bank Of Nigeria Plc New Market Road Onitsha Leasing As A Major Financing Device For Small Scale Industries. A Case Study Of Hapel Nig Ltd Leasing As A Form Of Financing. A Case Study Of Onitsha

https://uniprojects.net/projects/finance-project-topics-materials/

Education

en

The United Nations Development Programme says the conflict in the Northeast can lead to loss of 1.1 million lives of Nigerians by 2030 if the current investment deficit in development is not addressed. This is contained in a report formally launched virtually on Thursday titled ‘Assessing the Impact of Conflict on Development in Northeast Nigeria.’ - We`ll tackle drugs abuse, trafficking on our campuses — Uni-Abuja VC - Pregnant woman, 2 others die in Lagos-Ibadan road crash According to the report, since 2009, the devastating conflict in north-east has directly resulted in the deaths of approximately 35,000 people as a consequence of insurgency. “However, indirect deaths including disease and hunger resulting from the conflict’s physical and economic destruction, already far outnumber those from direct causes,” the report warns. The report also says that critical aspects of progress and development, including Gross Domestic Product (GDP), poverty, malnutrition, infant mortality, education, water availability and sanitation, may not return to pre-conflict levels even by 2030. “Findings from the report show that for each casualty caused directly by insurgency, an additional nine people, primarily children, have lost their lives due to lack of food and resources. As a result, more than 90 percent of conflict-attributable deaths are of children under the age of five. “The report further notes that physical and economic destruction wrought by the insurgency has dismantled already fragile health and food systems. Less than 60 percent of health facilities in Adamawa, Borno, and Yobe states are fully functional, while a quarter are either completely destroyed or non-functional. “Attacks from insurgency have also led to massive internal displacement. More than 1.8m Nigerians are displaced in Adamawa, Borno, and Yobe states, with the vast majority (nearly 1.5m) located in Borno. In addition, 1.8m students were out of school in 2020, and without increased investment in development efforts, the average Nigerian in the north-east will have lost a full year of education by 2030,” the report said. Speaking on the development, the UNDP Resident Representative, Mr. Mohamed Yahya, said that while the Nigerian Government has made great strides in retaking and stabilizing large areas of the region, continued investment in development from both national and international stakeholders is needed. “Without continued investment in development as a long-term solution, the protracted conflict in north-east Nigeria will continue to impact other parts of the country and the entire Sahel region. There is a need for international partners and national stakeholders to ensure that funds are invested not only on life saving and humanitarian needs but also on mid- and long-term development priorities in order to enable Nigeria to achieve the SDGs and attain the AU 2063,” Yahya said. The report, among others, suggest that to overcome the conflict, development efforts need to be focused on the stabilization of affected areas through a community-level approach that enhances physical security and access to justice; rehabilitation of essential infrastructure and basic service delivery as well as revitalization of the local economy like market stalls, schools and police stations.

https://dailytrust.com/b-haram-

en

When you are asked to talk about your past, how do you usually react? Some people would have smiles on their faces. They would gladly talk about it. Some would become sullen and moody. The past wasn’t too good to them. No matter how you feel about your past, you know that you cannot change it anymore. It is part of who you are. Talking about it in the correct tense is important. You need to let people know that it has already happened and it’s over. You may want to know how to check past tense through some tools? You can learn more when you continue to read now. It will be easy to find some text talking about things that happened in the past. People find history important. If you are trying to find some text about using the past tense, though, you will have a hard time searching. Types of Past Tenses That Past Tense Changer Detects It will be easy to type something in the present tense and change it to the past tense. You just need to use a past tense changer. The more that you know about past tense and what are available, the better. - Simple Past Tense – To do this, you need to use the base verb and change its verb form to the past tense form. You just need to put an -ed at the end of the verb or use the past participle of the verb. - Past Continuous Tense – This is the past tense form of “to be.” This can be used to describe an action in the past that was not completed. - Past Perfect – This is the type of past tense wherein you will use had plus a past form version of the verb. You can use this when you want to describe a series of actions. - Past Perfect Continuous – This type of past tense where you would be using had been the verb, and –ing. You can use this to describe something that was done in the past that led to other events that also happened in the past. The types may be confusing in the beginning. You do not want to make a mistake, especially when storytelling. The best thing to do is to use a website that detects past tense verbs. Common Past Tense Mistakes There are common mistakes that people deal with when using different tenses. The most common one is not being consistent with the tense being used. Some of the issues may not be detectable in your writing, especially if you just wrote things without thinking. If you want to detect if you have used some words in the past tense, you can check if it is past tense by using the right past tense changer. - Not using the past perfect tense correctly Some people hear the term “past perfect” and remember all of the word exercises they did when they were younger. This is confusing but remember that you can use past perfect when talking about some events that happened earlier. For example, you may say, “I made ice cream.” This is in the simple past tense. If you use it in the past perfect tense, you will say, “I have made ice cream.” If you feel confused about this, you can always check your essay for past tense online. The right website or app can help you out. - The use of incorrect terms when you are talking about flashbacks There are moments when you may want to talk about something that happened in the past. You will use flashbacks to describe the events that happened. It can be annoying to go through many “hads”. Remember that your main goal is to make your reader understand what happened in the past. Make sure to use some transition phrases and some page breakers. It will make readers understand what you are trying to portray. If you want to know how to check past tense, you can do it with the right app or website. Just imagine how perfect your past tense is going to be. - Using past continuous tense when it is not needed When you use past continuous tense, you are talking about something that happened in the past, but you describe another action that happened before. For example, you may say, “I was driving along the street when I saw my ex-boyfriend and her new girlfriend.” The mistake that may happen is using this type of tense when it is already unnecessary. It is best to lessen the clutter of what you are trying to imply. The more that you keep things simple, the more readers will understand what you are trying to say. Artificial Intelligence At The Service Of You To Improve Your Writting Artificial intelligence (AI) has completely changed the way we do things. Whether it’s how we entertain ourselves at home, interact with our devices, or even how we travel, the long hand of AI seems to be touching everything. And this interfacing with AI has found its way into the content creation and writing field, with more and more people embracing AI-powered past tense converter online checkers. If you are considering using an online checker, this section will help you establish the pros of our AI-powered present tense to past tense converter before making the investment. One of the most undeniable facts about employing a past tense to present tense converter is the amount of time it saves you. Compared to manual editing, the present to past tense converter can significantly save you the time taken editing, especially when you are dealing with higher volumes of content. All you simply need to do is to paste your texts into the tool, click the button, and wait for the checker to identify all grammar mistakes. In the past few years, the salaries for professional content writers have shot off the roof. And this is also true for professional editors. As such, students or businesses working on a tight budget may find difficulties in hiring these professionals. And even when they can, they still have to spend significant periods waiting for feedback on how to proceed with their projects. An online past to present tense converter like ours, on the other hand, comes with a free-to-use version, letting you edit your texts without spending a fortune. What’s more, the tool provides real-time feedback, making it a compelling alternative if you are looking to save both time and money. Our past tense checker is one of the leading tools of its kind out there. Along with helping change sentence into past tense online, you can use it to flag and fix grammatical and punctuation errors, such as errant commas, silly typos, and as misplaced apostrophes. It also comes with a comprehensive plagiarism checker, assuring you of overall high-quality writing. and other writing mistakes within the shortest time possible. Better yet, it is compatible with smartphones, tablets, or computers, letting you edit your work even when on the move. Accurate and Explicit Feedback When manually editing your work, editors need to go crawl through your work with a fine tooth comb highlighting and underlining all the mistakes. While at it, some mistakes may escape the bare human eye, even explanations describing the mistake overlooked. Luckily, our past tense tool not only highlights all the mistakes in your writing, but writes explicit explanations above the errors, and offers metalinguistic suggestions to correct them. What’s more, the change to past tense online checker is powered by English language rules, NLP, and AI, giving it unmatched accuracy. Conceptual Learning Opportunities An AI-powered tool not only helps you convert to past tense but also helps build a strong English foundation. The checker automatically breaks down your texts into some small parts, flags all the grammar, spelling, and punctuation mistakes, and then suggests possible corrections. But that’s not the best part; the tool comes with a complementary thesaurus dictionary, which helps you choose the best synonyms for difficult words, improving your English grammar. If you are a teacher, chances are you’ve encountered a student that failed to finish their assignment because they were waiting for your feedback or needed to understand the underlying explanation behind a correction you made to their work. On top of helping change sentence to past tense, the grammar checker will provide detailed explanations behind every message, instilling learner autonomy among your students. Easy To Use Online web forms are a staple these days. We use them every day on our social media platforms, websites, and databases. Our past tense checker is just another web form. To use it, you simply need to paste your text into the editor, click the Convert Tenses button, and let the checker handle the rest. All the buttons are clearly labeled in plain English, and the tool does not require any IT skills to operate. And since it is available as a Chrome Extension, you won’t be having any problems editing your online documents and social media posts. Even when using the free version of our past tense checker, it offers a pretty customizable experience despite its limited features. You can switch it off on certain websites, and curate a list of the most commonly used words, slang, and abbreviations. Write Unique Content Plagiarism is one of the most revered practices in writing. As a student, plagiarizing your academic papers could lead to lower grades or even expulsion from school. In a business context, plagiarized content could lead to potential litigation and impact your SEO rankings. For business professionals and researchers, plagiarism can completely damage your reputation, whether it was accidental or intentional. Our checker comes with a professional-grade plagiarism checker, which compares your work with billions of published articles and academic databases to ensure it is 100% unique. Our tool is available from anywhere and at any time, letting you edit and proofread your texts even when traveling. Why Use a Past Tense Checker – Is It Necessary? There are moments when no matter how hard you have tried to check, there are still some past tense mistakes that you will not immediately detect. The best thing to do is to use the right tool to provide a grammar check for past tense. This will work so well that it will know how to identify past perfect tense. There is no need to do the detection on your own. It will do everything that you need. This will also come with a past tense converter tool. Let us say that you do not know how the item can be used in the past tense. You just need to input your text, and it will do the conversion for you. You can just imagine how fast and easy this is going to be. It will be able to check my essay for past tense. It will also revise the past tense if necessary. The more you will use the perfect tense checker, the easier you will see how to identify perfect tense. The best thing is that it will do so much more than that. It can even detect some punctuation errors to make things easier for you. So if people would ask you how to check if everything is in past tense in your essay, you already know the answer. You just need a past tense changer. Our tool will help analyze your text immediately to avoid wasting your time anymore. Check out our past tense sentence checker now.

https://www.proofreadpasttense.com/how-to-find-past-tense-online/

en

In the dynamic world of marketing, where first impressions matter, packaging plays a pivotal role in shaping consumer perceptions and influencing purchasing decisions. This comprehensive guide explores the multifaceted landscape of packaging, delving into its significance, the various levels it encompasses, and the diverse materials used. We’ll also explore the intricate relationship between packaging and marketing, the essential components of labeling, and the growing importance of digital prints in the packaging industry. Branditprintit provides the best Packaging and Labeling in Lagos Nigeria, whether in Abuja, Port Harcourt, Kano, Kaduna, Ibadan, Benin, Warri, Yenagoa, Bonny Island, Uyo, Calabar, Enugu, Onitsha or Awka. Understanding packaging and labeling in marketing: A Strategic Imperative In the realm of marketing, packaging is not merely a protective covering; it’s a strategic tool that communicates brand identity, values, and influences consumer behavior. This section examines the critical role of packaging in marketing, highlighting its impact on brand recognition, shelf appeal, and overall consumer experience. Unveiling the Layers: Levels of Packaging Packaging operates on multiple levels, each serving a unique purpose. From primary packaging that directly contains the product to secondary and tertiary packaging that facilitate storage and transportation, we dissect the layers of packaging and their distinct functions in preserving product integrity and enhancing consumer convenience. Decoding the Enigma of packaging and labeling in marketing: What is Packaging PDF? In the age of digital transformation, understanding packaging has transcended physical boundaries. We explore the concept of “What is Packaging PDF?”— an insightful resource that sheds light on the digital aspects of packaging, including electronic labels, QR codes, and interactive packaging experiences. Packaging and Labeling: An Inseparable Duo Packaging and labeling are symbiotic elements that go hand in hand. This section explores the intricate relationship between packaging and labeling, emphasizing how a well-designed label can convey essential information, comply with regulations, and contribute to the overall aesthetics of the packaging. The Essence of Importance: Significance of Packaging Packaging is more than an aesthetic wrapper; it’s a powerful tool that impacts brand perception and consumer trust. We delve into the intrinsic importance of packaging, examining how it influences product positioning, market competitiveness, and sustainability practices. Variety in Unity: Types of Packaging in Marketing The diversity in consumer goods demands a variety of packaging solutions. From flexible packaging to rigid containers, we explore the different types of packaging in marketing, highlighting their unique features, advantages, and suitability for various industries. Building Blocks: Packaging Materials The materials used in packaging contribute to its functionality, sustainability, and overall appeal. This section explores common packaging materials, including plastics, paperboard, glass, and metals, and discusses the growing emphasis on eco-friendly alternatives. Navigating the Landscape: Packaging and Labeling in Marketing Packaging and labeling are integral components of the marketing mix. We explore their collaborative role in conveying brand messages, ensuring regulatory compliance, and fostering consumer trust. Case studies and real-world examples showcase the impact of effective packaging and labeling strategies. Learning from the Pros: Packaging and Labeling Examples Examining successful brands provides valuable insights into effective packaging and labeling strategies. This section analyzes noteworthy packaging and labeling examples, emphasizing innovative designs, sustainable practices, and the seamless integration of brand messaging. Education in a Box: Packaging and Labeling Course For those aspiring to delve deeper into the world of packaging and labeling, education is key. We explore the availability of courses focused on packaging and labeling, both in traditional academic settings and through online platforms, offering enthusiasts the opportunity to enhance their knowledge and skills. Notes on the Journey: Packaging and Labeling Notes A comprehensive understanding of packaging and labeling often involves studying educational notes. We explore the availability of learning resources, including textbooks, online guides, and industry publications, that provide valuable insights into the principles and practices of packaging and labeling. The Art and Science: Packaging and Labeling Process The creation of effective packaging involves a systematic process. We break down the packaging and labeling process, from initial design concepts to production and distribution, providing a step-by-step overview of the stages involved in bringing a product to market. Careers in Packaging and Labeling: Jobs That Seal the Deal As the packaging industry continues to evolve, so do career opportunities. We explore diverse job roles in packaging and labeling, ranging from graphic design and quality assurance to regulatory affairs and sustainability management, offering a glimpse into the dynamic and growing job market. Prints and Packaging Online: The Digital Evolution The integration of digital technology has revolutionized the printing and packaging landscape. We explore the benefits and possibilities of prints and packaging online, including personalized packaging, variable printing, and the use of augmented reality to enhance consumer engagement. Finding the Right Fit: Prints and Packaging Near Me For businesses seeking local solutions, proximity matters. We explore the benefits of choosing prints and packaging services near you, examining how local partnerships can streamline the production process, reduce environmental impact, and foster community engagement. Prints and Packaging in Nigeria: Navigating Local Markets In the context of Nigeria, a rapidly growing market, we delve into the landscape of prints and packaging. From local printing businesses to the unique challenges and opportunities within the Nigerian packaging industry, we explore the dynamics shaping this vibrant market. Bulk Solutions: Prints and Packaging Wholesale For businesses with large-scale printing and packaging needs, wholesale solutions offer efficiency and cost-effectiveness. We explore the advantages of prints and packaging wholesale, including bulk discounts, customization options, and streamlined logistics. The Future of Branding: Printing on Packaging Material Printing directly on packaging material opens new avenues for creativity and brand expression. We explore the possibilities and advantages of printing on packaging material, discussing technologies such as direct-to-substrate printing and their impact on brand visibility. In conclusion, packaging is a dynamic and multifaceted discipline that goes beyond mere containment. It is a strategic tool that can elevate a brand, communicate values, and contribute to sustainability goals. As technology continues to advance, the future of packaging holds exciting possibilities, where innovation, aesthetics, and functionality converge to create a seamless and delightful consumer experience.

https://www.branditprintit.com.ng/packaging-and-

en

Year after year, artificial intelligence has been affecting more industries and areas of our private lives. Healthcare is no exception! With its growing popularity, you may be wondering: is the hype around AI for medicine justified? In this blog, we will start by explaining what exactly is AI in healthcare. Next, we will discuss the benefits of AI in healthcare and the main use cases for AI in healthcare. Before we continue, let’s start by answering the basic question: What Exactly is AI in Healthcare? Machine learning has the potential to provide data-driven clinical decision support (CDS) to clinicians and hospital staff, paving the way for increased revenue potential. Algorithms and data are used in deep learning, a subset of artificial intelligence made to find patterns, to provide healthcare providers with automated insights. AI in Healthcare Market Overview: Striking Stats You Should Know Check out these latest stats to know more in-depth about how AI is transforming the healthcare industry. - The global artificial intelligence in healthcare market reached US$ 13248.65 million in 2022 and is projected to witness lucrative growth by reaching up to US$ 187704.75 million by 2031. The market is growing at a CAGR of 41.1% during the forecast period (2024-2031). Artificial intelligence in healthcare is a rapidly growing sector that is transforming the way healthcare services are delivered. - Plans for AI are in place for more than 80% of health executives. - In 2026, it is anticipated that AI applications will be able to reduce annual US healthcare costs by $150 billion. - As per the reports, the market for artificial intelligence (AI) in healthcare is expected to grow from USD 14.6 billion in 2023 to 102.7 billion in 2028. - In 2022, the global market for artificial intelligence in healthcare was worth $15.4 billion. From 2023 to 2030, the market is expected to grow at a CAGR of 37.5 percent. Now, let’s proceed to learn how AI helps healthcare. How Does AI Help the Healthcare Industry? Benefits of AI In Healthcare Here, in this section, we are going to explain the top benefits of using AI in healthcare. Let’s take a quick look: 01- Data Security When it comes to healthcare, protecting sensitive patient data is of the utmost importance. Rapidly advancing AI algorithms help encrypt personal information, clinical reports, diagnostic findings, and more, preventing them from being hacked and storing them securely in the cloud for patients and professionals to access anywhere. 02- Save Time And Resources As more vital processes become automated, medical professionals have more time to assess patients and diagnose illnesses and conditions. AI is speeding up operations to save valuable productivity hours for medical facilities. In any industry, time is money, so AI has the potential to save considerable costs. The healthcare sector wastes approximately $200 billion annually, according to estimates. A good portion of these unnecessary costs is attributed to administrative efforts, such as filing, reviewing, and resolving accounts. Another area for improvement is the determination of medical necessity. Traditionally, it takes hours to review patient history and information to assess medical necessity properly. As per the AI healthcare solutions provider, new natural language processing (NLP) and deep learning (DL) algorithms can help doctors review hospital cases and avoid denials. By freeing up vital productivity hours and resources, medical professionals have more time to help and interact with patients. 03- Robot-Assisted Surgery Complex and critical surgeries demand extreme care, precision, and experience. The number of successful surgeries performed with AI-enabled robots is skyrocketing. The surgical instruments, mechanical arms, and cameras on the robots are all included. They can be customized to reach every part of the human body and provide a clear, magnified view of the surgical site that is far better than human vision can offer. These surgeries reduce pain, take much less time, and help patients recover faster. 04- Speed Up Tasks The application of artificial intelligence to medicine has already impacted healthcare procedures worldwide. Innovations include appointment scheduling, clinical detail translation, and patient record tracking. AI is enabling healthcare facilities to streamline more tedious and painstaking tasks. For example, smart radiology technology can identify significant visual markers, saving hours of intensive analysis. Appointment scheduling, patient tracking, and care recommendations are all automated by other systems. One specific task that is streamlined with AI is insurance review. Insurance claim denials can be avoided by utilizing artificial intelligence (AI). With AI, healthcare providers can identify and address erroneous claims before insurance companies deny payment for them. This not only streamlines the claims process but AI also saves hospital staff time to work through the denial and resubmit the claim. By enabling faster payouts and more accurate claims, hospitals can be more confident in reimbursement timelines, making them more willing to accept a larger number of insurance plans. Basically, AI allows hospitals to accept a wide range of plans, which benefits potential and existing patients. 05- Smart Health Insurance Insurance companies can leverage connected devices to capture health data for their health and risk underwriting and claims operations. It gives transparency among insurers and clients and eliminates fake cases. 06- Location Tracking and Alerts Smart medical devices enable real-time monitoring, tracking, and alerts, enabling practical treatments, greater precision, rapid intervention by clinicians, and improving overall patient care outcomes. Wheelchairs, scales, nebulizers, pumps, or monitoring equipment can be tracked with sensors, making it easy for staff to track. 07- Reduction of Prescription Errors Prescription errors are a serious problem in the healthcare industry. In fact, according to a study, about 1.5% of prescriptions are incorrect. It might not appear to be a high percentage. Still, when you consider that more than 4 billion prescriptions are filled each year in the United States alone, it quickly becomes apparent that prescribing errors can significantly affect patient safety. One of the main advantages of using artificial intelligence in medicine is that it has the potential to reduce prescription errors. AI-powered systems can help verify that prescriptions are filled correctly and the correct dose is dispensed. Also, AI can flag potential bugs so they can be fixed before they do any damage. 08- Patient Impact The many benefits of AI in healthcare are not limited to clinicians, but can also apply to patient impact. Many patients are lost due to enrollment difficulties, so AI can help by recommending trials that match the patient’s conditions or symptoms. By using intelligent algorithms to extract data from a patient’s medical records, appropriate study recommendations can be made, saving the patient hours of painstakingly searching for a trial. These examples of artificial intelligence in healthcare are not a case of using AI technology to replace healthcare professionals, but rather an example where the use of new technology can provide better diagnosis and care, faster and with less human intervention. Now, you understand the benefits of AI in the healthcare industry, it’s the right time to hire AI developers for your project. Top Use-Cases of AI in Healthcare Let’s examine the most interesting AI applications in healthcare: #1- Diagnosing Infectious Diseases Machine learning and big data can help change the way we diagnose infectious diseases forever. That’s the case with technology implemented by Aperiomics, this firm developed an AI-based method for analyzing organic samples for the disease at incredible speed. Using deep shotgun metagenomics, it can take any genomically sequenced organic sample and identify all 37,000 known and sequenced pathogens. Using proprietary databases and ML algorithms, they can relatively quickly run standard genetic samples through their system and create a complete profile of everything in the sample, identifying what should and shouldn’t be there and in what amounts they were found. This work, which would be impossible without the power of AI, means that patients who have difficulty diagnosing infectious diseases can finally get diagnosed and treated. This technology has been used by people with chronic urinary tract infections to detect life-threatening cases of blood sepsis, severe gastrointestinal infections, and much more. #2- Avoiding Unnecessary Surgery It is not uncommon for patients to undergo surgeries that may later prove unnecessary. These unnecessary procedures force people to face entirely avoidable risks and burdensome surgical expenses. Health plans often include programs that help patients and their local healthcare teams make better-informed decisions by informing them of the latest treatment options available. However, it is difficult to achieve adequate participation in these programs, especially when patients are already in a crisis situation. Artificial intelligence and predictive analytics identify patients considering surgery and assesses whether these operations are really necessary or whether there are other much lower-risk alternatives that would better help them in the long run. Early identification of people on the path to surgery doubles the average program participation rate and reduces unnecessary surgeries. #3- Improving Medical Image Analysis Even the best doctor can miss a tiny detail on a CT scan or echocardiogram. Especially if a doctor focuses on looking for information in a medical imaging report related to a specific condition, it’s completely normal to miss signs of other, unrelated diseases. Some companies are leveraging the power of AI for comprehensive algorithm-based analysis of medical imaging reports that can improve diagnostic accuracy by up to 90%. The traditionally low quality of ultrasound images is improved so that this much cheaper diagnostic method can be used in patients without exposing them to unnecessary radiation. #4- Virtual Nursing Assistants Healthcare facilities dealing with a high volume of patients face many challenges in keeping costs of care low and improving outcomes. Nurses, in particular, often have to care for too many patients at once, so any technology that can help them reduce their workload is Artificial Intelligence. Virtual nursing assistants are intelligent assistants that can perform many tasks, such as monitoring patients’ vital signs remotely at any time of the day, alerting providers and physicians when a patient’s symptoms are alarmingly reduced, checking compliance with the plan of care, or extending care outside the clinic. Virtual nurses are a futuristic fusion of all the latest technologies, including ML, to compare vast databases of patient information, computer vision, natural language processing, and even advanced robotics. #5- Intelligent Robot-Assisted Surgery Robotic surgeons have already been proven for years as being able to prevent many of the human errors associated with exhaustion and fatigue. Surgical procedures require, in fact, the utmost patience and precision, and the skill of mechanical surgeons does not falter even when they operate non-stop for hours on end. AI combined with computer vision software can be used to achieve a new level of precision for even the smallest movements, allowing robot surgeons to perform procedures independently. Human surgeons can also benefit from Artificial Intelligence, as algorithm-assisted instrumentation can be used to perform procedures on a scale too small to perform by hand. #6- AI-powered Insights at Scale Data-driven insights are essential resources for healthcare organizations and governments to establish new health policies that can benefit the general population. There is already a platform that has been developed to aggregate data from admission, discharge and transfer, claims, and EHR systems to provide information to stay ahead of chronic diseases such as chronic obstructive pulmonary disease (COPD), chronic heart failure, and diabetes. This platform can be used to find new ways to reduce the risk of T2 diabetes through the use of wearable devices and lifestyle tips, and identify runaway drug costs and drug variance. Together with Microsoft, it is helping national governments to identify which COPD patients are getting worse and who need a higher dose of medication. It has also been used to identify runaway drug costs and drug variance, revealing that the right data can tell you that giving oral acetaminophen is more effective and less expensive than giving it intravenously. #7- Reducing the Burden of Uncompensated Care AI is being used to streamline and automate healthcare revenue cycle processes, particularly self-checkout. Some of the accounts are more likely to pay if given the chance, while others do not qualify for full financial assistance. Coupled with robotic process automation, AI’s advanced micro-segmentation capabilities can now drill into each patient’s ability to manage and pay their bills. A smart score will help identify the categories most at risk of incurring debt they will never be able to pay. #8- Supports Health Equity The AI and ML industry has a responsibility to design healthcare systems and tools that ensure fairness and equality, both in data science and clinical studies, to deliver the best possible health outcomes. With the increased use of ML algorithms in various areas of medicine, the risk of health inequities may occur. Those responsible for applying AI in healthcare need to ensure that AI algorithms are not only accurate, but also objective and fair. Since many clinical trial guidelines and diagnostic tests take into account the race and ethnicity of the patient, a debate has arisen: Is the selection of these factors based on evidence? Is data on race and ethnicity more likely to solve or increase universal health inequities? It is established that ML comprises a set of methods that allow computers to learn from the data they process. That means that, at least in principle, ML can provide unbiased predictions based only on an unbiased analysis of the underlying data. AI and ML algorithms can be educated to decrease or eliminate bias by promoting transparency and diversity of data to reduce health inequities. Healthcare research in AI and ML has the potential to eliminate differences in health outcomes based on race, ethnicity, or gender. Future of Artificial Intelligence in Healthcare The increasing availability of annotated healthcare data sets and medical imaging serves as a springboard from which new use cases for artificial intelligence and computer vision emerge. Most of the emerging technologies have yet to be tested in broader clinical settings. However, AI in healthcare has a bright future ahead of it! Artificial intelligence, deep learning, and machine learning have proven useful in helping both healthcare providers and patients. Other than current (and future) applications include - Revenue Cycle Management - Drug development processes - Claims Processing - Robotic process automation - Diagnosis of treatment applications - Clinical documentation management You can also analyze data about patient visits to the clinic, medications prescribed, laboratory tests, and procedures performed in the past. The theoretical results and early pilots instill great confidence in IT professionals and clinicians, who are joining forces to transform patient care and improve healthcare organizations around the world. However, for AI in healthcare to go mainstream, broader transformations of the healthcare sector are also required. Hospitals will have to invest in new technological systems and staff training. They will need to undertake substantial integration projects and focus their efforts on adopting these technologies into their daily clinical practice. Time to Sum Up As per a top artificial intelligence development company, the rapidly growing volume of patient data, both inside and outside the hospital walls, shows no signs of slowing down. Strained by ongoing financial challenges, operational inefficiencies, a global shortage of healthcare workers, and rising costs, healthcare organizations need technology solutions that drive process improvement and better care delivery while achieving crucial clinical and operational metrics. The potential of AI in healthcare could improve the quality and efficiency of the delivery system by analyzing and extracting intelligent insights from the vast amounts of healthcare data, which is limitless and well documented. If you are interested in implementing AI solutions in your healthcare business, then get in touch with us. Being a leading AI solutions provider, our professionals will assist you with the best of their knowledge.

https://www.quytech.com/blog/top-benefits-and-use-cases-of-ai-in-

en

MBA in Human Resource Management is a specialized master’s degree program that focuses on the principles and practices of managing human resources within organizations. It is designed to provide students with the knowledge and skills necessary to effectively handle various aspects of human resource management, such as recruitment, training and development, compensation and benefits, employee relations, and strategic workforce planning. Career opportunities for graduates with an MBA in HRM can be found in various industries and organizations. They may pursue roles such as HR manager, HR business partner, talent acquisition specialist, compensation and benefits manager, training and development manager, organizational development consultant, or HR analyst. Graduates may find employment in corporations, consulting firms, government agencies, nonprofit organizations, and other sectors where effective human resource management is essential.

https://collegencourses.com/mba-in-financial-

en

Cardiology is a term related to the medical line, which is used for doctors who treat diseases related to the heart, this treatment can range from simple medicines to surgery. Cardiologist is a specialist in heart disease, he treats from the smallest heart disease to major diseases like heart attack. That is, doctors who treat all types of heart related diseases are called cardiologists, and this work is called Cardiology. Cardiologist is a heart specialist, but there are many posts in this, there are many types of work, for which there are different cardiologists. You can see these posts below. ECG ( Electro Cardio Graphic ) Cardiovascular Technologist Assistant Cardiology Supervisor Cardiac Electro Cardiography Technician The work of a cardiologist is very difficult and sensitive. Because a person can die due to a mistake of a doctor, as well as a cardiologist can save a dying person. What does a cardiologist do? Cardiologists are medical doctors who specialize in diagnosing, treating, and preventing diseases related to the cardiovascular system, which includes the heart and blood vessels. They are highly trained experts in the field of cardiology, which is a branch of internal medicine. The cardiovascular system is critical for maintaining overall health as it is responsible for pumping blood and oxygen throughout the body. Cardiologists play a crucial role in helping patients manage various heart conditions, providing both non-invasive treatments and, in some cases, surgical interventions. Diagnosis: Cardiologists use various diagnostic tests and tools, such as electrocardiograms (ECGs or EKGs), stress tests, echocardiograms, and cardiac catheterization, to evaluate heart function and diagnose heart diseases. Treatment: They develop personalized treatment plans for patients with heart conditions. This may involve lifestyle changes, medication management, or interventional procedures like angioplasty and stent placement. Prevention: Cardiologists also focus on preventive measures to reduce the risk of heart diseases. They may advise patients on lifestyle modifications, such as adopting a heart-healthy diet, exercising regularly, and avoiding smoking and excessive alcohol consumption. Post-operative care: For patients who undergo heart surgeries or interventions, cardiologists provide post-operative care and monitor their recovery. Managing chronic conditions: Cardiologists often care for patients with chronic heart conditions like heart failure, arrhythmias, and coronary artery disease, providing ongoing management and support. Collaborating with other specialists: They work in close collaboration with other healthcare professionals, including cardiac surgeons, electrophysiologists, and primary care physicians, to ensure comprehensive and coordinated patient care. To become a cardiologist, one must complete medical school, followed by a residency in internal medicine, and then pursue a fellowship in cardiology. This extensive training equips cardiologists with the knowledge and skills needed to handle a wide range of cardiovascular conditions. If you have concerns about your heart health or are experiencing symptoms related to your cardiovascular system, it's important to consult with a qualified cardiologist for proper evaluation and management. A heart doctor is commonly referred to as a "cardiologist." Cardiologists are medical doctors who specialize in diagnosing, treating, and preventing diseases and conditions related to the heart and the cardiovascular system. They are experts in the field of cardiology and have undergone extensive training to care for patients with various heart-related issues. If you have concerns about your heart health or need specialized care for a heart condition, a cardiologist is the medical professional you should seek out. There are several reasons why you might need to see a cardiologist. Here are some common situations or symptoms that warrant a visit to a heart specialist: Chest pain: If you experience chest pain or discomfort, especially if it radiates to your arm, jaw, or back, it could be a sign of a heart-related issue, such as angina or a heart attack. Heart Blockage: When the coronary arteries that supply blood to the heart are unable to supply blood to the heart completely or stop circulation completely, this condition of the heart is called heart blockage. The coronary arteries transport oxygen and essential nutrients along with blood to the heart. There is plaque in the outer surface in the coronary arteries, when the size of the plaque starts increasing gradually, then the blood flow in the coronary arteries does not go well or stops completely. Blockage caused by plaques in the coronary arteries is called heart blockage. In the part of the heart where blood is not able to circulate, the parasite starts dying slowly, which can also lead to fatal problems like heart attack. Shortness of breath: Difficulty breathing, particularly during physical activity or while lying down, can be indicative of heart problems like heart failure or heart valve issues. High blood pressure: If you have consistently elevated blood pressure readings, a cardiologist can help manage and treat hypertension to reduce the risk of complications like stroke and heart disease. Palpitations: If you feel irregular, rapid, or skipped heartbeats, it's essential to get evaluated by a cardiologist to determine the underlying cause. Family history of heart disease: If there is a history of heart disease in your family, especially at a young age, a cardiologist can assess your risk factors and suggest preventive measures. High cholesterol: Elevated cholesterol levels can contribute to the development of atherosclerosis (narrowing of arteries), leading to heart problems. A cardiologist can help manage cholesterol levels and assess your cardiovascular risk. Diabetes: Individuals with diabetes have a higher risk of developing heart-related issues, so regular check-ups with a cardiologist are essential. Pre-existing heart conditions: If you have been diagnosed with a heart condition, such as arrhythmias, heart valve disease, or congenital heart defects, a cardiologist will provide ongoing management and monitoring. Fatigue and weakness: Unexplained fatigue and weakness could be symptoms of heart problems, particularly if they worsen with physical activity. Swelling in the legs: Fluid retention and swelling in the legs can indicate heart failure or other cardiovascular issues. Pre-operative evaluation: If you're planning to undergo surgery, especially for non-cardiac procedures, a cardiologist may assess your heart health to ensure you can safely tolerate the surgery. Lifestyle changes: If you want to adopt a heart-healthy lifestyle, a cardiologist can offer guidance on diet, exercise, and other preventive measures. Remember, even if you don't have any symptoms but have risk factors for heart disease (e.g., smoking, obesity, sedentary lifestyle, family history), seeing a cardiologist for a check-up and risk assessment can be beneficial for your long-term heart health. Always consult with your primary care physician or get a referral if you think you may need to see a cardiologist. Early detection and appropriate management are crucial in maintaining a healthy heart. Looking for the best heart doctor or heart specialist near Alwar? Find a top cardiologist near you in Alwar who is an expert in your specific cardiovascular condition. A cardiologist is a doctor who treats diseases of the heart and blood vessels. Our team of cardiovascular specialists works together to evaluate, diagnose and treat your unique heart and vascular care needs. Dr. Manoj Godara is one the best Cardiologists in Alwar, Rajasthan, India. Dr. Godara has been practicing medicine for over 14+ years and is a highly rated heart doctor of Alwar, according to our client reports. His top areas of expertise are Chest Pain, Heart Attack, Heart Blockage,Heart Valve, Heart Failure, Heart Arrhythmia, Heart Blood Clot, High Cholesterol, Uncontrolled Blood Pressure, Angioplasty Stenting, Pacemaker, Device Closure and Embolization Treatment. Dr. Godara is currently accepting new patients. More Heart Care Service in Alwar Copyright © 2022. All Rights Reserved. Dr Manoj Godara. Developed By Webmind Softech Pvt. Ltd.

https://www.drmanojgodara.com/doctors/cardiologists/alwar

en

Table of Contents Meaning of the pride of life In the 1st epistle of John, while teaching believers to abstain from the love of the world, John mentioned those things that constitute the world namely the lust of the flesh, the lust of the eyes, and the pride of life (1 John 2:16). On this occasion, the pride of life was mentioned for the first and the last time in the Bible. However, the concept of the pride of life is very ancient and it preceded the term itself; for we see many examples of it throughout the Old Testament. The pride of life is the sinful act of being arrogant, boastful, or showing off what one is, has, or has achieved. The pride of life is founded on achievements or accomplishments, pedigree or ancestry, position, and one’s connections. Those who are proud of life rely on their great achievements, their high positions or status, their aristocratic or royal ancestry, or their connections to people of power. For this reason, the pride of life consists of seeing others as inferior because of one’s achievements, personality, or status. The pride of life consists of feeling more important than others because of one’s beauty, fame, riches, position, etc. It also consists of lording yourself over others because of one office, accomplishment, wealth, etc. Signs of the pride of life In our daily lives, we can easily identify the pride of life; for those who are proud of life tend to boast of their ancestry, family connections, great offices, honorable acquaintances, and the like. Such people are glory-seeking and have high thoughts about themselves because of their position or high standard of living. Also, they tend to show off wealth, clothes, houses, furniture, equipment, and manner of living in order to earn honor and the respect of others. Moreover, they excessively enjoy their position in life and have a desire for praise, places of dignity, high titles, honor, glory, and the splendor of the world. Examples of the Pride of Life in the Bible Today, some professing Christians are so puffed-up and feel too big on account of what they possess or what they have accomplished in life; or they talk about their achievements and make it sound like they have done it all by themselves without God; or they make others feel like they are inferior to them because of their religious or political position, educational level; etc.; these are all expressions of the pride of life. The Bible has more examples to give us: 1. Nebuchadnezzar was guilty of Pride of Life According to biblical records, Nebuchadnezzar II is one of those found guilty of the pride of life. Though Nebuchadnezzar was not an Israelite, through Daniel Shadrach, Meshach, and Abednego, he was well acquainted with the knowledge of God. Daniel made him understand that all his accomplishments in life; the victories he had had in wars, his vast kingdom and the riches thereof, etc. are all from God, not by his strength. God, therefore, expected humility of heart and gratitude from Nebuchadnezzar. However, he failed to render both to God. One day, Nebuchadnezzar was walking on the roof of his palace in Babylon, and when he saw the magnificence of the city of Babylon, he was moved, out of pride and arrogance, Nebuchadnezzar said, “Is not this great Babylon, which I have built by my mighty power as a royal residence and for the glory of my majesty (Daniel 4:30 ESV)?” Then, seeing that Nebuchadnezzar did not give glory to Him but prided himself on his accomplishments, God dealt with Nebuchadnezzar for his pride – his pride of life – by turning him into a beast to humble him. 2. Haman was guilty of the Pride of Life When we talk about the pride of life, Haman is guilty at every turn. Once he sent for his friends and his wife Zeresh and recounted to them the splendor of his riches, the number of his sons, all the promotions with which the king had honored him, and how he had advanced him above the officials and servants of the king. He also added, “Even Queen Esther let no one but me come with the king to the feast she prepared. And tomorrow also I am invited by her together with the king (Esther 5:12)”. Haman was too bossy, glory-seeking, and felt too big for he was the king’s most important official and wanted everybody to kowtow to him and wanted to get all the attention when he passed by. However, all he had was not enough for him; he wanted one more thing. All the people in the kingdom respected and bowed down to Haman except one man, Mordecai the Jew. Since he could not get Mordecai to bow down to him and give him the attention he wanted, he became greatly offended and hated Mordecai and Mordecai’s people, the Jews. He devised a plan and wanted to illuminate Mordecai by hanging and also wanted to destroy all the Jews. But his plans failed and he was hanged in Mordecai’s stead – he and his sons. Reference Esther 5:9-14 3. King Hezekiah was guilty of the Pride of Life Hezekiah was a good king. He feared the Lord and was faithful to him, unlike his father King Ahaz. Because of this, God abundantly blessed him and he was exceedingly prosperous. However, when prosperity and abundance came his way, pride and recklessness set in. Hezekiah fell sick and would have died had he not cried to the Lord. God listened to him and gave him fifteen years more to live. Later after recovery, Merodach-baladan, king of Babylon, sent envoys with letters and a present to Hezekiah, for he heard that he had been sick and had recovered. Then Hezekiah, driven by the pride of life – the pride of what he had and had accomplished all over the years, welcomed them gladly and took them around to show them his treasure house, the silver, the gold, the spices, the precious oil, his whole armory, all that was found in his storehouses. There was nothing in his house or in all his realm that Hezekiah did not show them. Then Isaiah the prophet came to King Hezekiah. After learning that the king had shown the envoy from Babylon everything in his kingdom – all his treasures and achievements, Isaiah prophesied to him. He said that someday the Babylonians would invade and loot his kingdom of all the treasures accumulated since the days of his fathers and some of his descendants would be taken away to become eunuchs in the palace of the king of Babylon. Reference Isaiah 39:1-8 As you can see all the stories that had to do with the pride of life had a sad ending. Even for good people like Hezekiah, the pride of life brought bad repercussions on him and his descendants. The pride of life profits nothing but humility pays. We have to beware of the pride of life as Christians.

https://salvationcall.com/pride-life/

en

Prof. Jean-Jacques Muyembe-Tamfum, has achieved a feat of a lifetime, discovered cure for Ebola virus. “From now on, we will no longer say that Ebola is incurable. These advances will help save thousands of lives. Now that 90 per cent of patients can go into the treatment centre and come out completely cured, they will start believing it and building trust in the population and community.” Said Prof. Jean-Jacques Muyembe-Tamfum, the pioneer of the cure for the deadly Ebola virus. The names of the drugs are REGN-EB3 and mAb114. This is a brief biography of Prof. Jean-Jacques Muyembe-Tamfum. - He is a Congolese. He is from the Democratic Republic of Congo - He is a medical doctor - He was born in March 17, 1947. He is 77 years - He studied Medicine in the the Lovanium University (present day University of Kinshasha), DR Congo and had his PhD in Virology in the University of Leuven, Belgium - He is a professor of Virology - He was a one time Dean of Medicine, University of Kinshasha. - He is reported to have investigated the first Ebola outbreak alongside Peter Piot. - In his first contact with an Ebola patient, he didn’t wear hand gloves. Blood spilled on his hands, but he washed them off immediately and survived the virus. According to him, “If I had not washed my hands I would have died”. - He has been quarantined several times over his frequent contact with the virus - He is General Director of the Democratic Republic of the Congo National Institute for Biomedical Research. A position he has held since 1998 - He is described as the “Ebola hunter” because he has dedicated his life to the eradication of Ebola from he face of the earth. - He first came across ebola virus in 1976 at a Belgian hospital in Yambuku, DRC. Using a long steel rod, Muyembe took liver biopsies from three nuns who had died, but the results were inconclusive. - Prof. Jean-Jacques Muyembe-Tamfum was the first scientist to come into contact with the Ebola virus and survive. - He has chaired the international committees that looked to control the Ebola outbreaks in Gabon and the Democratic Republic of the Congo. - He was the first to link the spread of Ebola virus to fruit bats exposure. - He pioneered the use of an ebola vaccine to limit the spread of the virus, including vaccinating health care providers. - Prof Muyembe was the first to develop the anti-ebola serum therapy. - Apart from Ebola virus, he has done numerous researches on Marburg virus, cholera, trypanosomiasis (sleeping sickness), influenza, polio, Congo virus, Rift valley fever and Lassa fever. - He has been looking for the cure for Ebola since 1976! - He has received numerous accolades and awards among the list with dates are: 1996 Chevalier de l’Ordre National de Léopard (National Distinguishing Award), Zaire, 1996. 2001 Paul Harris Fellow of the Rotary International. 2004 National Gold Medal for High Achievement in Science, Art, and Literature. 2015 Lifetime Achievement Award, 7th International Symposium on Filoviruses (Washington). 2015 Christophe Mérieux Prize (Paris). 2015 Royal Society Pfizer Advanced Award (London). 2017 Doctor Honoris Causa, University of Lubumbashi (DRC). 2017 Honorary International Fellow, American Society of Tropical Medicine and Hygiene (ASTMH). 2018 U.S.Patent No.10,160,795 issued December 25, 2018 for Neutralizing Antibodies To Ebola Virus Glycoprotein And Their Use; 2019 (May) Doctor Honoris Causa, University of Antwerp (Belgium) - Speaking to BBC news after the heart warming breakthrough, Prof. Jean-Jacques Muyembe-Tamfum, described the feat as “achievement of a lifetime”. Please note that this article does not rule out or in any way diminish the contributions of other scientists in achieving this medical feat. It is a teamwork and I as a doctor 100 percent recognize this. It is not a one man glory. #Science has not started yet# This is just the beginning! Read his interview on WHO Bulletin

https://nimedhealth.com.ng/2019/08/14/biography-of-prof-jean-

en

Nowadays, most of the people are suffering from refractive errors like far-sightedness and near-sightedness or astigmatism. Hence, they are prescribed to wear spectacles as per their eye problems. Sometimes, it becomes quite irritating to wear eyeglasses all the time. In such conditions, they use contact lenses for better vision and to get rid of eyeglasses. So, in this article, you will learn all about contact lenses and their advantages and disadvantages and also their types. A contact lens is a thin, curved and clear plastic lens placed on the surface of the eye for better and improved vision. These lenses float on the tear film that covers your cornea. A contact lens is a medical device prescribed to correct vision or for cosmetic reasons. Contact lenses are more comfortable while driving, playing sports and other outdoor activities as compared to spectacles. The contact lens can be soft or hard. Most people prefer to wear a soft one. Nowadays these are available in different colors. Next, you will learn about the types of contact lenses. 1. Hard contact lenses • Gas Permeable Lens:- this is the most common type of hard contact lens. These are made from plastic along with other materials. They hold their shape firmly and allow the oxygen to flow out to your eye. • RGP Lenses:- these lenses are helpful in astigmatism and they provide sharper vision as compared to soft lenses 2. Soft contact Lenses:- most people prefer to wear soft contact lenses as they are very comfortable and have many options. Here are some types of soft contact lenses. • Daily Wear Contact Lenses: - You can remove them easily when you go to sleep. They can be disposable; you can change the pair every day. Ophthalmologist recommends these lenses if you wear them once in a while. • Extended Wear Contact Lens: - You can wear these lenses while sleeping, but they are needed to remove for cleaning once a week. They can increase the risk of infection. • Tonic Contact Lenses: - They help in correcting vision for people with astigmatism. • Decorative Contact Lenses: - These lenses are worn for cosmetic purposes and they do not correct the vision. They include colored contacts and lenses that can hide the natural color of your eye. They can lead to serious eye problems. 3.Contact lenses for Presbyopia: - These are designed to correct the normal vision problem occurred in people of 40 or above when it becomes hard to see the close objects clearly. • Improved Vision: - Contact lenses help to correct refractive errors like farsightedness, nearsightedness or astigmatism. • Better eye comfort • They do not capture moisture even when you wear a medical face mask. • They do not obstruct vision or reflect anything. • They are more comfortable than spectacles. • Daily activities become more convenient with contact lenses. • Contact lenses provide aesthetic benefits. • They are easy to wear. You can wear your contact lenses within second, just put the finger on the tip of your finger and place it on your eye. • You feel more confident in contact lenses. • They work perfectly in all weather. As you know that everything has its own advantages and disadvantages. the same thing goes with contact lenses. We have discussed the advantages of contact lenses. Now you will know the disadvantages of contact lenses. When you wear contact lenses for a long time, then the chances of complications arise frequently. The symptoms of the complication are mentioned below: - • Red Eye: - Contact lenses can cause redness and irritation in your eyes. This happens when you wear your contact lenses for a long time or wear faulty lenses. • Dry Eyes: - Contact lenses can cause you to dry out your eyes. • Infection: - Contact lenses easily get dust, debris or other dust particles to get into your eyes and give rise to the eye infection. • Eye Ulcer:- You can suffer from an eye ulcer on the surface of your eye if you don’t treat the infection for a long time. A Centre of Excellence in Eye Care for 37 years, Bharti Eye Foundation was conceptualised and nurtured by Dr. S. Bharti in 1985. The hospital has been accredited for patient safety and quality of care by the National Accreditation Board for Hospitals and Healthcare Providers (NABH) , a constituent Board of Quality Council of India. All super-speciality eye treatment services and investigations are available under one roof. Week-Days: | 9am - 6pm | Sunday: | CLOSED | Copyright © 2022 · All Rights Reserved Bharti Eye Foundation

https://bhartieyefoundation.in/contact-lens.html

en

The sugar-coated peanut production line is also called coated peanuts making machine, honey roasted peanuts processing line, etc. The industrial coated peanut processing plant can process all kinds of coated peanuts, such as Japanese peanuts, sugar-coated peanuts, Wasabi peanuts, candy-coated peanuts, etc. The production line mainly includes the peanut roasting machine, jacketed cooking pot, roasted peanut peeling machine, peanut coating machine, coated peanuts roasting machine, cooling machine, seasoning machine, and packaging machine. Table of contents - Classification of coated peanuts - Production process of the sugar-coated peanut production line - Sugar-coated peanut production line’s features Classification of coated peanuts According to different taste and processing methods, coated peanuts can be divided into two types: sugar-coated peanuts, fried coated peanuts. Generally, sugar-coated peanuts have a smoother surface and have many flavors. Common ones are Japanese peanuts, candy coated peanuts, chocolate coated peanuts, Wasabi peanuts, etc. Fried coated peanuts need to be fried during processing, and their surface is generally not smooth. The taste of this coated peanut is relatively crisp and spicy and there are also various flavors. You can view more about the fried coated peanut processing line. Production process of the sugar-coated peanut production line Large-scale processing of sugar-coated peanuts requires a complete sugar-coated peanut production line. The processing line mainly includes a peanut roaster, a jacketed cooking kettle, a roasted peanut peeler, a peanut coating machine, coated peanut oven, air cooler, seasoning machine, and packaging machine. Sugar-coated production line’s machine list NO. | Equipment name | 1 | Peanut roasting machine | 2 | Jacketed cooking pot | 3 | Roasted peanut peeling machine | 4 | Peanut coating machine | 5 | Coated peanut roasting oven | 6 | Air cooling machine | 7 | Coated peanuts seasoning machine | 8 | Coated peanuts packaging machine | Peanut roasting machine We first need to add clean peanuts to the peanut roaster and bake them until they are half cooked. This drum-type peanut roaster can adopt gas heating and electric heating. With the continuous rotation of the drum in the machine, the peanut kernels can be evenly heated. The heating time and heating temperature of the machine can be adjusted. Jacketed cooking kettle The jacketed cooking kettle is mainly used for cooking peanut coating syrup. The raw materials are usually sucrose (or high-quality granulated sugar), purified water, and waxy corn starch. Different users use different formulas. The jacketed pot can also be heated by electricity or gas, and its volume varies with different machine models. Coated peanut peeling machine The peanut peeler is mainly used to quickly peel the roasted peanuts, so it is also called dry type peanut peeler. The machine adopts a rolling peeling method to remove the peanut skin without breaking the whole peanut. The peeling efficiency is high and the operation is relatively simple. Peanut coating machine Before using the peanut coating machine, we need to prepare the coating powder in advance. Coating powder is also determined according to the processing needs of customers. Usually waxy corn starch and refined wheat flour are mixed in a ratio of 1:1. Weigh a certain amount of peanut kernels into the coating machine, then add a layer of syrup, and then add a layer of coating powder, so that it is fully stirred and mixed in the coating machine. Coated peanut roasting machine The purpose of putting the coated peanuts into the roasting machine for further roasting is to make the coating syrup, coating powder, and peanut kernels fully stick together. In addition, the roaster has a continuous swing function during the roasting process, which can make the surface of the coated peanuts smoother, and after roasting, the coated peanuts including the coating powder on the surface can be roasted. Coated peanut cooling machine After baking is completed, we need to use an air cooler to cool the baked sugar-coated peanuts. The machine can quickly reduce the temperature of the coated peanuts to room temperature, making it crisper. Coated peanut seasoning machine Customers can choose this automatic seasoning machine to process coated peanuts into various flavors according to their processing needs, such as chocolate flavored peanuts, Wasabi peanuts, candy-coated peanuts, etc. The last step in processing coated peanuts using sugar-coated peanut production line is packaging. We can use this granular food packaging machine to package processed sugar-coated peanuts. Customers can choose the packaging style and the weight of each bag. Sugar-coated peanut production line’s features 1.This coated peanut processing line is just a configuration often sold in our factory. In fact, we can customize the production line according to specific customer needs, because the processing technology of coated peanuts for different customers is not exactly the same, so the machines used are also different. 2. The coated peanut production line has automatic and semi-automatic, the output is mainly 50kg/h, 100kg/h, 150kg/h, 200kg/h, 300kg/h, 500kg/h or more. We can provide customers with corresponding coating peanut processing solutions.

https://frenchfrymachine.com/sugar-coated-peanut-production-line-wasabi-

en

Human rights enforcement in Nigeria HUMAN RIGHTS ENFORCEMENT IN NIGERIA – THE PROCEDURE FOR As a citizen, it is important to understand your fundamental rights as enshrined in Chapter IV of the 1999 Constitution of the Federal Republic of Nigeria. These Fundamental Human Rights pertain to life; dignity of human person; personal liberty; fair hearing; private and family life; freedom of thought; conscience and religion; freedom of expression and of the press; peaceful assembly and freedom of association; freedom of movement; freedom from discrimination; and freedom to acquire and own immovable property anywhere in Nigeria. Nevertheless, understanding how to enforce these rights where there is a breach, or to file claims in court for compensatory reliefs against anyone including a government agency such as the Police may be just as important. How to Enforce Fundamental Human Rights in Nigeria It is only at a court of competent jurisdiction that you can enforce any of the above listed rights either by alleging that your right is being breached, is likely to be breached or has been breached. Action against human right abuse or fundamental right enforcement may be filed at the Federal High Court or at the High Court of a State, though for complaints relating to employment discrimination, the National Industrial Court may be the appropriate venue. Court hearing of the application is usually on affidavit evidence and the written address filed in Court which must have the application on which the written address is based. Who Can File an Action? Under the Fundamental Rights (Enforcement Procedure) Rules 2009, a person who can institute an action for the enforcement of human right alleged to have been breached may include any of the following persons: Anyone acting in his own interest; Anyone acting on behalf of another person; Anyone acting as a member of, or in the interest of a group or class of persons; Anyone acting in the public interest, and Association acting in the interest of its members or other individuals or groups ALSO READ: What to do if faced with police arrest What’s the Financial Cost to Prosecute an Action for Fundamental Rights Enforcement? Often, lawyers work on pro bono (free) basis, or on a contingency basis to prosecute an action for fundamental right enforcement on behalf of clients. By contingency basis, it means the client may have to pay the court fee and/or administrative fee. If the action succeeds in court, the lawyer receives a fixed percentage of the compensatory monetary cost awarded to client as his professional fees. If the action fails, the lawyer receives nothing or only the out-of-pocket expenses (if any). Remedies and Reliefs You May Be Entitled To Where the Court finds the merit of your claims, the court will make such orders as it may consider just or appropriate for the purpose of enforcing or securing the enforcement of any of the Fundamental Rights provided for under the 1999 Constitution of the Federal Republic of Nigeria, as amended, or the African Charter on Human and People’s Rights (Ratification and Enforcement) Act to which you may be entitled to. Such orders may be in form of declaratory reliefs or injunctive reliefs. The Court may award monetary cost in your favour as compensatory damages for the unlawful action of the Respondent (the opposing party); grant bail if you are in detention; order the Respondent to tender a written apology to you; or issue a restraining order against the Respondent from taking further steps in connection with the matter or maintaining status quo. The information provided herein is for general informational purposes only and must not be construed as a substitute for legal guidance. For human rights enforcement in Nigeria, talk to an attorney. Lex Artifex, LLP. Human rights enforcement in Nigeria

http://lexartifexllp.com/human-rights-enforcement/

en

Being a good husband and great dad is a lifelong commitment that requires effort, understanding, and love. In a world that constantly evolves, it is essential to embrace the values and qualities that promote healthy family relationships. This article aims to provide a comprehensive guide, spotlighting key points to ensure you can cultivate a strong partnership with your spouse and become an exceptional father to your children. Open, honest, and respectful communication is crucial in maintaining a strong bond with your partner and children. Actively listen to their needs and concerns, express your emotions in a constructive manner, and encourage dialogue that fosters understanding and trust. Being emotionally available and supportive to your spouse and children nourishes the family dynamic. Show empathy, offer comfort, and provide reassurance during challenging times. Create an environment where everyone feels heard, loved, and valued. Devote quality time to your family on a regular basis. Engage in shared activities and create lasting memories together. Whether it’s family outings, game nights, or simply having dinner together, these moments build strong connections and foster a sense of belonging. Being a good husband and great dad means actively participating in domestic responsibilities. Share household chores, contribute to the upbringing of your children, and prioritize creating a fair and equitable division of labor. This promotes a harmonious and supportive environment for your family. Lead by Example Set a positive example for your children by demonstrating integrity, respect, and kindness in your actions and words. Show them the importance of empathy, honesty, and responsibility. Your behavior serves as a blueprint for their development and shapes their character. Parenting and marriage are continuous learning processes. Invest in personal growth and development by attending workshops, reading parenting books, seeking advice, and staying open to new ideas. Embrace challenges as opportunities for growth and adapt to the evolving needs of your family. Becoming a good husband and great dad is a lifelong journey that requires commitment, patience, and love. By prioritizing on the points listed above, you can create a nurturing and supportive environment for your family. Remember, a strong partnership and positive fatherhood go hand in hand, leaving a lasting impact on the well-being and happiness of your loved ones. “International Men’s Day (IMD) is a global awareness day for many issues that men face, including parental alienation, abuse, homelessness, suicide, and violence, celebrated annually on November 19″.

https://crispng.com/international-mens-day-how-to-be-a-good-husband-and-

en

Table of Interests Looking for the best article on Candle Sticks?, then “12 Top Popular Candlestick Patterns Used in Technical Analysis 2021”, is for you. Candlestick charts are one of the most commonly used technical tools to analyze price patterns. They have been used by traders and investors for centuries to find patterns that may indicate where the price is headed. This article will cover some of the most well-known candlestick patterns with illustrated examples. If you’d first like to get familiar with reading candlestick charts, check out A Beginner’s Guide to Candlestick Charts. How to use candlestick patterns There are countless candlestick patterns that traders can use to identify areas of interest on a chart. These can be used for day trading, swing trading, and even longer-term position trading. While some candlestick patterns may provide insights into the balance between buyers and sellers, others may indicate a reversal, continuation, or indecision. It’s important to note that candlestick patterns aren’t necessarily a buy or sell signal by themselves. They are instead a way to look at market structure and a potential indication of an upcoming opportunity. As such, it is always useful to look at patterns in context. This can be the context of the technical pattern on the chart, but also the broader market environment and other factors. In short, like any other market analysis tool, candlestick patterns are most useful when used in combination with other techniques. These may include the Wyckoff Method, the Elliott Wave Theory and the Dow Theory. It can also include technical analysis (TA) indicators, such as Trend Lines, Moving Averages, the Relative Strength Index (RSI), Stochastic RSI, Bollinger Bands, Ichimoku Clouds, Parabolic SAR, or the MACD. Bullish reversal patterns A candlestick with a long lower wick at the bottom of a downtrend, where the lower wick is at least twice the size of the body. A hammer shows that even though the selling pressure was high, the bulls drove the price back up close to the open. A hammer can be either red or green, but green hammers may indicate a stronger bull reaction. Also called the inverse hammer, it’s just like a hammer, but with a long wick above the body rather than below. Similar to a hammer, the upper wick should be at least twice the size of the body. An inverted hammer occurs at the bottom of a downtrend and may indicate a potential reversal upward. The upper wick shows that price stopped its continued downward movement, even though the sellers eventually managed to drive it down near the open. As such, the inverted hammer may suggest that buyers soon might gain control of the market. Three white soldiers The three white soldiers pattern consists of three consecutive green candlesticks that all open within the previous candle’s body, and close at a level exceeding the previous candle’s high. Ideally, these candlesticks shouldn’t have long lower wicks, indicating that continuous buying pressure is driving the price up. The size of the candles and the length of the wicks can be used to judge the chances of continuation or a possible retracement. A bullish harami is a long red candle followed by a smaller green candle that’s entirely contained within the body of the previous candle. The bullish harami can unfold over two or more days, and it’s a pattern indicating that selling momentum is slowing down and might be coming to an end. Bearish reversal patterns The hanging man is the bearish equivalent of a hammer. It typically forms at the end of an uptrend with a small body and a long lower wick. The lower wick indicates that there was a large sell-off, but bulls managed to take back control and drive the price up. Keeping that in mind, after a prolonged uptrend, the sell-off may act as a warning that the bulls might soon be losing control of the market. The shooting star is made of a candlestick with a long upper wick, little or no lower wick, and a small body, ideally near the low. The shooting star is a similar shape as the inverted hammer but is formed at the end of an uptrend. It indicates that the market reached a high, but then sellers took control and drove the price back down. Some traders prefer to wait for the next few candlesticks to unfold for confirmation of the pattern. Three black crows The three black crows are made of three consecutive red candlesticks that open within the previous candle’s body, and close at a level below the previous candle’s low. The bearish equivalent of three white soldiers. Ideally, these candlesticks shouldn’t have long higher wicks, indicating continuous selling pressure driving the price down. The size of the candles and the length of the wicks can be used to judge the chances of continuation. The bearish harami is a long green candle followed by a small red candle with a body that’s entirely contained within the body of the previous candle. The bearish harami can unfold over two or more days, appears at the end of a downtrend, and may indicate that buying pressure is decreasing. Dark cloud cover The dark cloud cover pattern consists of a red candle that opens above the close of the previous green candle but then closes below the midpoint of that candle. It can often be accompanied by high volume, indicating that momentum might be shifting from the upside to the downside. Traders might wait for a third red candle for confirmation of the pattern. Rising three methods This pattern occurs in an uptrend, where three consecutive red candles with small bodies are followed by the continuation of the uptrend. Ideally, the red candles shouldn’t breach the range of the preceding candlestick. The continuation is confirmed with a green candle with a large body, indicating that bulls are back in control of the trend’s direction. Falling three methods The inverse of rising three methods, indicating the continuation of a downtrend instead. Candlestick Patterns Used in Technical Analysis A Doji forms when the open and the close are the same (or very close to each other). The price can move above and below the open but eventually closes at or near the open. As such, a Doji may indicate an indecision point between buying and selling forces. Still, the interpretation of a Doji is highly dependent on context. Depending on where the line of the open/close falls, a Doji can be described as: Gravestone Doji – Bearish reversal candle with a long upper wick and the open/close near the low. Long-legged Doji – Indecisive candle with both a lower and upper wick, and the open/close near the midpoint. Dragonfly Doji – Either bullish or bearish candle (depending on context) with a long lower wick and the open/close near the high. According to the original definition of the Doji, the open and close should be exactly the same. But, what if the open and close aren’t the same but are instead very close to each other? That’s called a spinning top. However, since cryptocurrency markets can be very volatile, an exact Doji is rare. As such, the spinning top is often used interchangeably with the Doji. Candlestick patterns based on price gaps There are many candlestick patterns that use price gaps. A price gap is formed when a financial asset opens above or below its previous closing price, which creates a gap between the two candlesticks. Since cryptocurrency markets trade round the clock, patterns based on these types of price gaps are not present. Even so, price gaps can still occur in illiquid markets. However, since they happen mainly because of low liquidity and high bid-ask spreads, they might not be useful as actionable patterns. Candlestick patterns are essential for any trader to at least be familiar with, even if they don’t directly incorporate them into their trading strategy. While they can be undoubtedly useful to analyze the markets, it’s important to remember that they aren’t based on any scientific principles or laws. They instead convey and visualize the buying and selling forces that ultimately drive the markets. That’s the much we can take on the topic “12 Top Popular Candlestick Patterns Used in Technical Analysis “. Thanks For Reading Leave a Reply

https://o3schools.com/popular-

en

Since the fall of man, the basis of salvation has always been the death of Christ. No one, either prior to the cross or since the cross, would ever be saved without that one pivotal event in the history of the world. Christ’s death paid the penalty for past sins of Old Testament saints and future sins of New Testament saints. The requirement for salvation has always been faith. The object of one’s faith for salvation has always been God. The psalmist wrote, “Blessed are all who take refuge in him” (Psalm 2:12). Genesis 15:6 tells us that Abraham believed God and that was enough for God to credit it to him for righteousness (see also Romans 4:3-8). The Old Testament sacrificial system did not take away sin, as Hebrews 10:1-10 clearly teaches. It did, however, point to the day when the Son of God would shed His blood for the sinful human race. What has changed through the ages is the content of a believer’s faith. God’s requirement of what must be believed is based on the amount of revelation He has given mankind up to that time. This is called progressive revelation. Adam believed the promise God gave in Genesis 3:15 that the Seed of the woman would conquer Satan. Adam believed Him, demonstrated by the name he gave Eve (v. 20) and the Lord indicated His acceptance immediately by covering them with coats of skin (v. 21). At that point that is all Adam knew, but he believed it. Abraham believed God according to the promises and new revelation God gave him in Genesis 12 and 15. Prior to Moses, no Scripture was written, but mankind was responsible for what God had revealed. Throughout the Old Testament, believers came to salvation because they believed that God would someday take care of their sin problem. Today, we look back, believing that He has already taken care of our sins on the cross (John 3:16; Hebrews 9:28). What about believers in Christ’s day, prior to the cross and resurrection? What did they believe? Did they understand the full picture of Christ dying on a cross for their sins? Late in His ministry, “Jesus began to explain to his disciples that he must go to Jerusalem and suffer many things at the hands of the elders, chief priests and teachers of the law, and that he must be killed and on the third day be raised to life” (Matthew 16:21-22). What was the reaction of His disciples to this message? “Then Peter took him aside and began to rebuke him. ‘Never, Lord!’ he said. ‘This shall never happen to you!’” Peter and the other disciples did not know the full truth, yet they were saved because they believed that God would take care of their sin problem. They didn’t exactly know how He would accomplish that, any more than Adam, Abraham, Moses, or David knew how, but they believed God. Today, we have more revelation than the people living before the resurrection of Christ; we know the full picture. “In the past God spoke to our forefathers through the prophets at many times and in various ways, but in these last days he has spoken to us by his Son, whom he appointed heir of all things, and through whom he made the universe” (Hebrews 1:1-2). Our salvation is still based on the death of Christ, our faith is still the requirement for salvation, and the object of our faith is still God. Today, for us, the content of our faith is that Jesus Christ died for our sins, He was buried, and He rose the third day (1 Corinthians 15:3-4).

http://www.gotquestions.org/before-Jesus.html#ixzz3biu1FYOT

en

Guidance and information about high consequence infectious diseases and their management in England. Definition of HCID In the UK, a high consequence infectious disease (HCID) is defined according to the following criteria: - acute infectious disease - typically has a high case-fatality rate - may not have effective prophylaxis or treatment - often difficult to recognise and detect rapidly - ability to spread in the community and within healthcare settings - requires an enhanced individual, population and system response to ensure it is managed effectively, efficiently and safely Classification of HCIDs HCIDs are further divided into contact and airborne groups: contact HCIDs are usually spread by direct contact with an infected patient or infected fluids, tissues and other materials, or by indirect contact with contaminated materials and fomites airborne HCIDs are spread by respiratory droplets or aerosol transmission, in addition to contact routes of transmission List of high consequence infectious diseases A list of HCIDs has been agreed by the UK 4 nations public health agencies, with advisory committee input as required: Contact HCIDs | Airborne HCIDs | Argentine haemorrhagic fever (Junin virus) | Andes virus infection (hantavirus) | Bolivian haemorrhagic fever (Machupo virus) | Avian influenza A H7N9 and H5N1 | Crimean Congo haemorrhagic fever (CCHF) | Avian influenza A H5N6 and H7N7* | Ebola virus disease (EVD) | Middle East respiratory syndrome (MERS) | Lassa fever | Mpox (monkeypox) (Clade I only)** | Lujo virus disease | Nipah virus infection | Marburg virus disease (MVD) | Pneumonic plague (Yersinia pestis) | Severe fever with thrombocytopaenia syndrome (SFTS) | Severe acute respiratory syndrome (SARS)*** | *Human-to-human transmission has not been described to date for avian influenza A(H5N6). Human to human transmission has been described for avian influenza A(H5N1), although this was not apparent until more than 30 human cases had been reported. Both A(H5N6) and A(H5N1) often cause severe illness and fatalities. Therefore, A(H5N6) has been included in the airborne HCID list despite not meeting all of the HCID criteria. **Based on the new WHO nomenclature, the mpox virus is comprised of 2 clades: Clade I (formerly Congo Basin (Central African) Clade) and Clade II (formerly West African Clade). Clade II consists of the subclades Clade IIa and Clade IIb, with the latter subclade referring mainly to the group of variants circulating in the 2022 global outbreak. See HCID status of mpox for further details on status classification. ***No cases reported since 2004, but SARS remains a notifiable disease under the International Health Regulations (2005), hence its inclusion here. The list of HCIDs will be kept under review and updated by the UK 4 nations public health agencies, with advisory committee input as required, if new HCIDs emerge that are of relevance to the UK. Status of COVID-19 As of 19 March 2020, COVID-19 is no longer considered to be an HCID in the UK. There are many diseases which can cause serious illness which are not classified as HCIDs. The 4 nations public health HCID group made an interim recommendation in January 2020 to classify COVID-19 as an HCID. This was based on consideration of the UK HCID criteria about the virus and the disease with information available during the early stages of the outbreak. Now that more is known about COVID-19, the public health bodies in the UK have reviewed the most up to date information about COVID-19 against the UK HCID criteria. They have determined that several features have now changed; in particular, more information is available about mortality rates (low overall), and there is now greater clinical awareness and a specific and sensitive laboratory test, the availability of which continues to increase. The ACDP is also of the opinion that COVID-19 should no longer be classified as an HCID. The World Health Organization (WHO) continues to consider COVID-19 as a Public Health Emergency of International Concern (PHEIC), therefore the need to have a national, coordinated response remains and this is being met by the government’s COVID-19 response. Cases of COVID-19 are no longer managed by HCID treatment centres only. Healthcare workers managing possible and confirmed cases should follow the National infection prevention and control manual for England (or the equivalent devolved administration infection prevention and control manuals), which includes instructions about different personal protective equipment (PPE) ensembles that are appropriate for different clinical scenarios. HCIDs in the UK HCIDs, including viral haemorrhagic fevers (VHFs), are rare in the UK. When cases do occur, they tend to be sporadic and are typically associated with recent travel to an area where the infection is known to be endemic or where an outbreak is occurring. None of the HCIDs listed above are endemic in the UK, and the known animal reservoirs are not found in the UK. As of July 2022, the UK has experience of managing confirmed cases of Lassa fever, EVD, CCHF, MERS and mpox. The vast majority of these patients acquired their infections overseas, but secondary transmission of MERS and mpox have occurred in the UK. In May 2022, cases of mpox (Clade IIb, at that time classified as an HCID) without a history of travel overseas were reported in the UK. More information is available in the epidemiological overview of this outbreak. Avian influenza A(H5N1) has caused outbreaks in wild birds and captive birds in the UK in 2021 and 2022. In January 2022, the UK Health Security Agency (UKHSA) reported the first human case of avian influenza A(H5N1) in the UK. Animal-to-human transmission of avian influenza is very rare and the risk to human health is kept under frequent review. The epidemiology and genomics of A(H5N1) virus and human health risk is actively monitored by UKHSA, in collaboration with international partners. HCID risks by country For health professionals wishing to determine the HCID risk in any particular country, an A to Z list of countries and their respective HCID risk is available. See HCID country risks. Monthly summaries of global HCID events UKHSA’s epidemic intelligence activities monitor global HCID events. These are published in a monthly summary. Infection prevention and control in healthcare settings Specific infection prevention and control (IPC) measures are required for suspected and confirmed HCID cases, in all healthcare settings (specialist and non-specialist). IPC guidance appropriate for suspected and confirmed cases of Lassa fever, EVD, CCHF, MVD, Lujo virus disease, Argentinian haemorrhagic fever, Bolivian haemorrhagic fever and SFTS, is available in the ACDP guidance. IPC guidance for MERS, avian influenza, Nipah virus infection, mpox and pneumonic plague, can be found in the relevant UKHSA guidance listed below. Links to relevant UKHSA guidance for healthcare professionals Specialist advice for healthcare professionals The Imported Fever Service (IFS) provides 24-hour, 7-days a week telephone access to expert clinical and microbiological advice. Hospital doctors across the UK can contact the IFS after discussion with the local microbiology, virology or infectious disease consultant. Hospital management of confirmed HCID cases Once an HCID has been confirmed by appropriate laboratory testing, cases in England should be transferred rapidly to a designated HCID Treatment Centre. Occasionally, highly probable cases may be moved to an HCID Treatment Centre before laboratory results are available. There are 2 principal Contact HCID Treatment Centres in England: the Royal Free London High Level Isolation Unit (HLIU) the Newcastle Royal Victoria Infirmary HLIU. Further support for managing confirmed contact HCID cases is provided by the Royal Liverpool Hospital and the Royal Hallamshire Hospital, Sheffield. There are 5 interim Airborne HCID Treatment Centres in England. Adult and paediatric services are provided by 7 NHS Trusts: - Guy’s and St Thomas’ NHS Foundation Trust (adult and paediatric services) - Royal Free London NHS Foundation Trust, with a paediatric service provided by Imperial College Healthcare NHS Foundation Trust - Royal Liverpool and Broadgreen University Hospitals NHS Trust, with a paediatric service provided by Alder Hey Children’s NHS Foundation Trust - Newcastle upon Tyne Hospitals NHS Foundation Trust (adult and paediatric services) - Sheffield Teaching Hospitals NHS Foundation Trust (adult service only) Case transfer arrangements Hospital clinicians seeking to transfer confirmed HCID cases, or discuss the transfer of highly probable HCID cases, should contact the NHS England EPRR Duty Officer. It is expected that each case will have been discussed with the Imported Fever Service before discussing transfer. Travel health advice for HCIDs The National Travel Health Network and Centre (NaTHNaC) provides travel health information about a number of HCIDs, for healthcare professionals and travellers. Advice can be accessed via the Travel Health Pro website.

https://www.gov.uk/guidance/high-consequence-infectious-diseases-hcid

en

If you want to write a book that is impossible to put down, focus Tip #1: Know Your Characters When you know your characters inside and out, developing their unique voice in the conversation is much easier. Answering character development questions can help you understand your characters in depth. While you may never write all the details into your story, it will help shape the voice of your characters. When your characters are well developed, it is easy and natural to know what they might say in any given situation. This makes your job as a writer a lot easier! It will also help your audience connect with your characters as well. Tip #2: Give Your Dialogue a Purpose characters speak, it better be for a good reason. If you listen to everyday conversations between people, it can be pretty boring and mundane without any real purpose. Avoid small talk between your characters, as this will most likely only bore your readers, and not really give much insight into the character’s personalities. Just as you don’t expect to learn a lot about someone in a real life conversation of small talk, you can’t expect your readers to form an instant bond to your characters from a dialogue that doesn’t have a purpose. Your readers aren’t going to feel very close to your characters if the dialogue does not go deeper into the depths of their minds, personalities and motives. You want to make sure when writing that every word your characters say has a clear reason for being said. If the dialogue exchange between two characters isn’t necessary, think about revising the scene so what they talk about builds anticipation or Tip #3: Remember Dialogue is Not Always Realistic Pleasantries like “Hello” and “How are you?” can bore readers also. You want your dialogue to be fast paced and moving – you want to get straight to the action. Another thing to remember when keeping dialogue realistic is to limit your use of profanity, slang, and stereotypes. Not only can this alienate readers, it can also make your book seem dated in a couple of years. If you’re in doubt, consider visiting the Urban Dictionary which has definitions and usage for a lot of common slang words. If your word is in the Urban Dictionary, you may want to consider using a different word! Tip #4: Understand That Boring Dialogue Tags are OK In school we’re taught to use all kinds of different synonyms for the word “said”. However, studies have shown that readers will treat the word “said” as a period – they will not even notice it in use. If you write words that are longer and complicated it can lead to the reader becoming fatigued. Stick with words like: asked, said, replied. If it becomes repetitive, stop using them all together and break it up with sentences that use action. Remember you don’t always need to put them in every paragraph, especially if it’s clear who is speaking. Tip #5: Keep Formatting and Punctuation Simple While Writing Dialogue Want to turn your readers off fast? Write gigantic paragraphs of dialogue. Learning how to punctuate dialogue takes some practice, but there are all sorts of resources online to help you. Having a desk reference of grammar can be invaluable as a fiction writer. Tip #6: Study and Practice to Learn How to Write Dialogue! more you study and practice writing dialogue, the more experience you will have. More experience in writing dialogue will help you naturally fit conversations into your stories. Here are some ways you can study and practice writing dialogue: - Read plays and screenplays. - Watch movies or television shows. - Read books with strong character development through dialogue. - Search through GoodReads for quotes to help you find some interesting book choices. - Pay attention to your own personal conversations and the conversations you overhear. Most importantly, practice writing the conversations between your characters. Use writing prompts and exercises to stretch your creativity. Culled from Think Written

https://thereadywriters.com/6-tips-for-writing-powerful-

en

Every program is a set of instructions, whether it’s to add two numbers or send a request over the internet. Compilers and interpreters take human-readable code and convert it to computer-readable machine code. In a compiled language, the target machine directly translates the program. In an interpreted language, the source code is not directly translated by the target machine. Instead, a different program, aka the interpreter, reads and executes the code. Okay… but what does that actually mean? Imagine you have a hummus recipe that you want to make, but it's written in ancient Greek. There are two ways you, a non-ancient-Greek speaker, could follow its directions. The first is if someone had already translated it into English for you. You (and anyone else who can speak English) could read the English version of the recipe and make hummus. Think of this translated recipe as the compiled version. The second way is if you have a friend who knows ancient Greek. When you're ready to make hummus, your friend sits next to you and translates the recipe into English as you go, line by line. In this case, your friend is the interpreter for the interpreted version of the recipe. Compiled languages are converted directly into machine code that the processor can execute. As a result, they tend to be faster and more efficient to execute than interpreted languages. They also give the developer more control over hardware aspects, like memory management and CPU usage. Compiled languages need a “build” step – they need to be manually compiled first. You need to “rebuild” the program every time you need to make a change. In our hummus example, the entire translation is written before it gets to you. If the original author decides that he wants to use a different kind of olive oil, the entire recipe would need to be translated again and resent to you. Examples of pure compiled languages are C, C++, Erlang, Haskell, Rust, and Go. Interpreters run through a program line by line and execute each command. Here, if the author decides he wants to use a different kind of olive oil, he could scratch the old one out and add the new one. Your translator friend can then convey that change to you as it happens. Interpreted languages were once significantly slower than compiled languages. But, with the development of just-in-time compilation, that gap is shrinking. A Small Caveat Most programming languages can have both compiled and interpreted implementations – the language itself is not necessarily compiled or interpreted. However, for simplicity’s sake, they’re typically referred to as such. Python, for example, can be executed as either a compiled program or as an interpreted language in interactive mode. On the other hand, most command line tools, CLIs, and shells can theoretically be classified as interpreted languages. Advantages and disadvantages Advantages of compiled languages Programs that are compiled into native machine code tend to be faster than interpreted code. This is because the process of translating code at run time adds to the overhead, and can cause the program to be slower overall. Disadvantages of compiled languages The most notable disadvantages are: - Additional time needed to complete the entire compilation step before testing - Platform dependence of the generated binary code Advantages of interpreted languages Interpreted languages tend to be more flexible, and often offer features like dynamic typing and smaller program size. Also, because interpreters execute the source program code themselves, the code itself is platform independent. Disadvantages of interpreted languages The most notable disadvantage is typical execution speed compared to compiled languages.

https://www.freecodecamp.org/news/compiled-versus-interpreted-languages/

en

Nigeria has been facing a constitutional crisis since its independence in 1960. The 1999 Constitution is also the reason for the call for secession, disintegration, restructuring and true federalism by some ethnic and interest groups. Evidently the over 350 ethnic nationalities in Nigeria are not happy with the progress made so far. This necessitates the production of a new constitution that will reflect the character of Nigeria and its spirit and thought. Although Nigeria is a federation in name what presently obtains is a unitary system of government where the federal government is too powerful and the federating states have been weakened leading to underdevelopment, inequitable distribution of resources, abuse of political power, corruption, high level of insecurity and power imbalance. It is no longer news that the 1999 Constitution was promulgated into force by military decree. The military introduced the present unitary system of government through their decree which eventually became the 1999 Constitution. Nigeria has since been suffering from a military era hang-over arising from over-centralization of power and resources, weakened unit states, and non-performance of local governments. No thanks to the writers of the 1999 Constitution who laid a faulty foundation for modern-day Nigeria. Also, shame on members of the political class who are opposed to the production of a new constitution for the country. This group of politicians is bent on upholding a faulty constitution due to their selfish interest. They have also disregarded the recommendations of the 2014 National Conference constituted by former President Goodluck Ebele Jonathan which many sane minds agree is capable of addressing some of the national questions. Consequently, most of the 36 states and the Federal Capital Territory continue to depend on the federal government for survival despite dwindling oil revenues and the numerous resources in each federating states. States are unable to explore their natural resources due to poor governance structure which the present crop of political leaders is unwilling to address. We cannot continue to confine ourselves to the 1999 Constitution (as amended) in our quest to find answers to the national questions. Since 1999, Nigerian democracy has been unsuccessful. Nigeria is classified as a hybrid regime rather than a full democracy. This is according to the 2019 Democracy Index by the Economist Intelligence Unit. The people are not allowed to choose their preferred officials and representatives due to electoral fraud. The courts have now been delegated with the responsibility of determining the winner of an election. Politicians do not want any electoral reform that will affect the status quo. The recommendations of the Uwais electoral reform committee have not been fully implemented. Major General Buhari also thwarted efforts to reform the electoral system by the 8th National Assembly. He declined assent to the Electoral Act Amendment Bill on four occasions. It is obvious that nothing much will change with respect to the electoral system in the 2023 general elections. Elections in Kogi and Bayelsa states shows what the chain of events would be in 2023. Politicians have perfected the art of rigging and are unlikely to change their ways. The living standard of Nigerians is also very poor. Nigeria is presently the poverty capital of the world overtaking India. While the present government says they are going to lift 100 million people out of poverty in 10 years, their policy direction says otherwise. Furthermore, any attempt by the Nigerian masses to express their displeasure over the lack of accountability and transparency, high level of corruption, lack of respect for the rule of law, human right abuses, high level of insecurity and mismanagement of the economy within the present government is seen as an affront. The freedom of expression, freedom of speech, freedom of the press and freedom of assembly are no longer respected. Nigerian laws do not apply equally to all citizens. The National Assembly and the Judiciary have become the appendages of the Executive rather than being independent. This is evident in the willingness of the 9th National Assembly to become a rubber stamp of the Executive and the inability of the Judiciary to challenge the Executive’s lack of respect for the rule of law. For the Judiciary, the invasion of the homes of judicial officers by security operatives and the removal of the former Chief Justice of Nigeria, Justice Walter Onnoghen—all on the orders of Major General Buhari may have informed their silence in the face of tyranny. Corruption remains a major challenge affecting economic development and threatening the fabric of the Nigerian State. According to Transparency International, Nigeria ranked 146 out of 180 countries on the global corruption index in 2019. This is in spite of the fact that the fight against corruption is one of the key priorities of the Buhari regime. The fight against corruption is perceived by many people as selective and a witch-hunt of political opponents. The present government is also neck-deep in corruption. Contrary to the federal government’s defense, the corruption perception index by Transparency International is reflective of the current situation in Nigeria. Corruption is the source of many public officer’s stupendous wealth and the consequence is the high level of poverty and inequality seen in our society. According to the 1999 Constitution (as amended), sovereignty belongs to the Nigerian people but when the foundation of the Nigerian State is faulty, what can the poor masses do? The political leaders are the ones saddled with the responsibility of laying a strong foundation for the Nigerian State. Unfortunately, those who derive their powers and authorities from the people have now become more powerful than the people who gave them the power. The Nigerian masses have lost the power to oust bad leaders. Those who claim that Nigeria’s unity is sacrosanct and are opposed to both constitutional and non-constitutional solutions to Nigeria’s problems are the enemies of the country. They are only interested in using the resources from Southern Nigeria to develop North Nigeria as well as line their private pockets and achieve their selfish ambition. The amendment of some sections of the 1999 Constitution by the political class does not go far enough and cannot ensure true federalism or restructuring. Furthermore, those who are opposed to restructuring of the Nigerian State will not provide the needed votes required for a constitutional amended to bring restructuring into effect. The unity of Nigeria is not guaranteed without laying a new foundation for the Nigerian State. Nigeria’s political leaders are only postponing the evil day by maintaining the status quo and dismissing agitations for secession, disintegration, restructuring and true federalism. There is a need to produce a new constitution that addresses the issues of restructuring and true federalism. The collapse of African countries such as the Democratic Republic of Congo, Somalia, and South Sudan should tell us something. Bolaji Samson Aregbeshola is an Op-Ed Contributor and the author of “Nigerian Political Parties and Politicians: Winding Road from Country to Nation.”

https://thenews-chronicle.com/when-the-foundation-of-the-nigerian-

en

How Cybersecurity can be optimized with Python Language in 2022? Without a doubt, programming plays a vital role in cybersecurity, especially when it reaches to intermediate and advanced levels. Python language has been serving businesses for quite a while, it has really become a center point of cybersecurity professionals. Many people are curious to know why Python is a perfect language for cybersecurity.. Why is Python important in cybersecurity? Is Python relevant for cybersecurity? Python is extremely useful for cybersecurity professionals because it can perform multiple cybersecurity functions, like malware analysis, scanning, and penetration testing. Now that we’ve established that Python Development Services is a go-to language, let’s talk about its important benefits, and what makes it so useful for cybersecurity? Python’s Usefulness in Cybersecurity Let’s discuss the key benefits of why Python is so important for cybersecurity. 1. Socket Programming Socket programming is an in-built feature with Python. To work with socket programming, the package socket is initially imported and later related methods are called. The Python installation comes integrated with an in-built IDLE GUI. 2. Network Port Scanning Typically, the Nmap tool is perfect to implement network port scanning, but it has feature to install without any third-party tool, using Python socket programming. In Kali Linux, several tools are present for digital forensics related to networks, but several implementations can be performed using Python programming with only a few lines of instruction. 3. Geolocation Extraction IP address real-time location can be extracted using Python and Google APIs with the support of pygeoip module. In the starting, import the GeoIP database from the URL: Geolite2 Database Once the database is loaded and mapped via Python Development Company during installation, any IP address can be identified with global visibility and location. 4. Real-time Extraction from Social Media Live and real-time information from social media platforms is easily downloaded using Python scripts. In Python, several modules and extensions are interfaced with WhatsApp, Twitter, Facebook, LinkedIn, and several other platforms. 5. Packet Sniffing Packet sniffing is basically like putting a wiretap on a network system. Different tools are available like Wireshark or a simple Python script can be written to get similar results. If you plan to sniff traffic on your local network, it is important to have NIC to use promiscuous mode, and this may need additional permission. 6. TCP Packet Injection Once you access web packets from one device to another, it is important to have the same headers and use a script including packetInjection.py by placing updated information in the packet. Some examples applying this approach consists of denial-of-service and man-in-the-middle attacks. The contents of packages can be manipulated at the edge of the network to avoid or manage the flow of information. 7. Highly Flexible Language The ease of working with Python makes it perfect to build new applications as needed and easily integrate old scripts and executables into new code. Similarly, it can enhance modules in C, C ++, Java, or ASP DOT NET to enhance capabilities that can be embedded in other applications. All of this makes it simpler to respond to cybersecurity threats and eliminate possible exploits in the first place. 8. Perfect to Build Anything in Cybersecurity With a strong knowledge of Python, cybersecurity professionals can easily complete Python enterprise software development for any business requirement. For example, the language is perfect for malware analysis, host discovery, sending and decoding packets, accessing servers, port scanning, and at last network scanning. Also, the language is so useful in scripting, automated tasks, and data analysis, it makes sense that Python has grown in popularity as cybersecurity became more important. The above pointers show Python’s elegant simplicity to validate the security of the applications before moving ahead with deployment. Frequently Asked Questions 1. Why is Python important in cybersecurity? Python is an advantageous programming language for cybersecurity because it can perform many cybersecurity functions, including malware analysis, scanning, and penetration testing functions. It is user-friendly and has an elegant simplicity, making it the perfect language choice for many cybersecurity professionals. 2. How Python can be used in cybersecurity? Python can be used for nearly anything in cybersecurity. For example, Python is used heavily in malware analysis, host discovery, the sending and decoding of packets, accessing servers, port scanning, and network scanning, just to name a few. 3. How important is programming in cyber security? Programming knowledge proves essential for analyzing software for vulnerabilities, identifying malicious software, and other tasks required for cyber security analysts. What to draw from this advice is that programming knowledge gives you an edge over other security professionals without those skills. 4. How Python is used in web development? - Python offers different choices for web development: - Frameworks like Django and Pyramid. - Micro-frameworks like Flask and Bottle. - Advanced CMS like Plone and Django CMS. We hope the blog has offered proper details why Python is perfect for cybersecurity. Python is extremely useful in the world of cybersecurity as it performs several cybersecurity functions including the most important ones scanning and malware analysis. So, keeping all the above elements of Python in mind, you can hire python developer India to secure your web application. They will ensure security and better performance of your website and help in creating a quick response to any cyber-attack.

https://pythonindia.in/blog/how-cybersecurity-

en

EFFECTIVE LEADERSHIP AND THE SACRIFICE OF SELF-ABANDONMENT If, and as it is commonly agreed, the effectiveness of a leader significantly premises on doing the right things, then, a primary assignment of a leader is not just to have ideas in form of a vision, but also and more important, to focus on galvanizing; assisting; encouraging and supporting people to input their best for the best-possible results. In his book “Leadership is an Art”, Max De Pree, the charismatic former CEO of centurial and highly reputed American furniture manufacturing company – Herman Miller, tells the posthumous story of an employee (a millwright) who had worked in the company for several years. On a condolence visit to the family, the late millwright’s wife sought to read aloud some poetry. She came back with a bound book and for several minutes read selected (out of a lot) pieces of super-beautiful poetry. When asked who the poet was, the deceased’s wife replied they were written by her late husband. Everyone was amazed. Even for a couple of decades after, many wondered if the millwright was actually a poet who did a millwright’s work or he was a millwright who wrote poetry. Abandoning Self to the Strengths of Others The above anecdote sets a crucial background for this little piece on the need for leaders to intrinsically endorse the concept of persons; embrace diversity of people’s gifts and talents; and entrench principles that’ll liberate people to do what is required of them in the most-possible congenial atmosphere. If, and as it is commonly agreed, the effectiveness of a leader significantly premises on doing the right things, then, a primary assignment of a leader is not just to have ideas in form of a vision, but also and more important, to focus on galvanizing; assisting; encouraging and supporting people to input their best for the best-possible results. This involves abandoning oneself to the strengths of others. In his article “What Makes an Effective Leader” (Harvard Business Review 2004), Peter Drucker, though acknowledged that many of the best business and nonprofit CEOs he had worked in his over 65-year consulting career, were not stereotypical leaders but “varied in terms of their personalities, attitudes, values, strengths, and weaknesses”, he nevertheless highlighted some non-negotiable practices that make effective leaders. - Effective leaders ask “What needs to be done?” - Effective leaders ask “What is right for the enterprise?” - Effective leaders take responsibility for communicating - Effective leaders think and act “we” rather than “I” The above factors take some “self-abandoning”. But abandoning what? True Leaders “Abandon” Self to Collective Purpose - True leaders abandon selves to the collective beliefs and value system. First, they continually review and challenge the corporate value system to see what works and what doesn’t. But more important, they subjugate their interests and desires to agreed collective philosophies. Business leaders should inexcusably be the number one corporate values champion. Regrettably, many leaders fail in this regard due to economic, social and status pressures. - True leaders abandon their interests and desires to creating/weaving healthy relationships within the enterprise. Beyond that, they provide enablers for their followers to create healthy relationships even outside the immediate organisation – at home – among friends –within the society. A tough task? Yes, it takes sacrifices. True leaders know (and act by design) that the role demands something (a lot) of them that’s beyond the dignity and paraphernalia of the office. - They subjugate their egos. They listen to and execute superior ideas at the relegation of their own personal thoughts. They eschew ‘I am the boss’ style/thinking which prevents the free flow of ideas and effective decisions. They appreciate the skills and talents of their people and only work towards solidifying the diverse talents to produce great results. Smart leaders are sensible and humble to adopt smart people’s superior ideas rather than lord theirs over them. - They immerse themselves in the collective goals even when they are personally discomforted. As Peter Drucker puts it, they are mainly concerned with what needs to be done and what is right for the enterprise. - Great leaders connect with the people they lead. Although leaders may vary in their personalities – extroverted or reclusive, gentle or controlling, generous or frugal – great ones connect with their followers at every level. One-on-one, in groups, and in corporate. Whether they are autocratic, participative or Jack Welch’s “ideal boundary-less”, true leaders communicate and get the right responses from their followers. They use the best of their swaying attributes to get the best out of people. - Great leaders are drawn to leaving strong legacies – a legacy of faith and emotional commitment to the system from those who would succeed them. They work out the foundation for the successors to accelerate “the vision” beyond their own capabilities. In general, good leaders are enthusiastic about – and focus on – how to weave together the fundamental elements of the organisation – Ideas, Belief System and Relationships, without which no organisation (business or non-business) could thrive. Ideas in this context does not only relate to the vision but also executive thinking on how to energise, empower and liberate people to give their best in thoughts and in deeds. Belief system here speaks to the corporate values, human nature, structure and performance management. And relationships being the bedrock of geniality at the workplace, through which great achievements can be attained. Dare to be a great leader.

https://teoaris.com/2024/02/28/sacrifice-of-leadership/

Business

en

The recent decision by the Supreme Court to uphold President Bola Tinubu’s election victory comes as a pivotal moment in Nigeria’s political sphere. Despite fierce opposition from Alhaji Atiku Abubakar and Mr. Peter Obi, the court’s ruling stands firm, supported by a series of critical factors that underscore the validity of Tinubu’s win. From considerations of compliance to the integrity of the electoral process, the judgment carries profound implications for the country’s governance amid its pressing economic, security, and social challenges. This analysis provides an insightful exploration of the core reasons that fortified the Supreme Court’s endorsement of President Tinubu’s electoral success, marking a significant milestone in the narrative of Nigeria’s political landscape. Here are ten reasons the Supreme Court upheld President Bola Tinubu’s election win: 1. Evidence of Compliance: The court found that the Independent National Electoral Commission (INEC) substantially complied with the provisions of the Electoral Act during the election. 2. Lack of Substantial Influence:It determined that the alleged non-compliance did not substantially affect the election’s outcome, as per section 185(1) of the Evidence Act. 3. Differentiating Portals:The court clarified the distinction between the election result collation system and the IReV portal, emphasizing that the failure of the latter does not hinder the manual collation process. 4. Electronic Transmission Failure: While acknowledging INEC’s failure to electronically transmit election results, the court emphasized that this omission did not directly impact the election results but might reduce the confidence of the voting population. 5. Inadmissible Evidence:The Supreme Court upheld the striking out of evidence from some of Atiku’s witnesses, highlighting that it constituted inadmissible hearsay. 6. Denial of Fair Hearing: The court ruled that raising the issue of President Tinubu’s alleged involvement in a US drug-related case after the respondents had filed their process denied them the right to fair hearing. 7. Lack of Alternative Result: Atiku failed to present an alternative result, and the court deemed the INEC-declared results as correct since there was no contradicting evidence. 8. Presumed Legitimacy of INEC Results: The court presumed the accuracy of the results announced by INEC, which showed President Tinubu as the winner. 9. Resolution of All Issues: The court resolved all the issues raised in Atiku’s petition against him, further solidifying the validity of President Tinubu’s victory. 10. Dismissal of the Appeal: With all issues resolved against the appellants, the court ultimately dismissed the appeal, affirming the judgment of the lower court without ordering costs. The Supreme Court’s decision solidifies President Tinubu’s mandate to address Nigeria’s pressing challenges and steer the nation toward progress and stability.

https://ikejabird.com/10-reasons-the-supreme-court-upheld-president-bola-

en

Hugh Hefner’s view of life was that individual civil liberties should be preserved and, wherever possible, expanded. Preternaturally suave, arch, debonair and endlessly successful with the opposite sex, Hugh Hefner was rarely — if ever — seen out of his pajamas and silk dressing gown. He was synonymous with Playboy, a magazine he launched in 1953 with $600 of his own money and then turned it into a global franchise, valued at $500 million in 2016. But Hefner’s significance extended far beyond his business activities and, in a way, offers a timeline of popular culture across the decades. Playboy had a formula. It included essays by the leading writers of the day, including Ernest Hemingway, Herbert Gold, Budd Schulberg, Vladimir Nabokov, Kurt Vonnegut, Saul Bellow, Bernard Malamud, James Baldwin, John Updike, Joyce Carol Oates the list goes on. There were also serious interviews with politicians and other influential figures, such as Malcolm X, Jean-Paul Sartre and, perhaps most famously, Jimmy Carter, who prompted outrage and admiration — though probably not in equal proportions — when he confessed, “I’ve looked on a lot of women with lust, I’ve committed adultery in my heart many times.” This was in 1976, before he was elected president of the United States. But it was the formula’s third ingredient that set the magazine and, by implication, Hefner apart. Playboy featured pictures of conventionally attractive young women, often posing in a way that suggested they were for the delectation of heterosexual men. And, as if to confirm that suggestion, each monthly issue had a centerfold adorned with a naked woman with the cognomen “playmate.” Presumably, the name itself was designed to evoke thoughts of childishness and frivolity: The nudes weren’t portrayed as serious marital partners, but as dolls or toys to be played with and, later, discarded. In the same year the magazine launched, the Alfred Kinsey’s landmark Sexual Behavior in the Human Female was published. Its findings pointed to the prevalence of premarital and extramarital sex, unwittingly providing an intellectual justification for Playboy’s open exaltation of a subject that had scarcely been considered, at least not openly, in the first half of the 20th century. If a magazine ever bottled the zeitgeist, it was Playboy. Its circulation reached 1 million by 1960 and, later, peaked at about 7 million in the 1970s. Hefner was lambasted by the self-appointed guardians of respectability in the 1950s, though his response was typically a shrug of the shoulders. His view was that America was as advertised — the land of the free. As such, citizens could please themselves whether to buy his product. Many years later, he would utter what might have served as his motto: “Let the buyer rule.” Hefner’s weltanschauung, or view of life, was that individual civil liberties should be preserved and, wherever possible, expanded. There was irony in this at a time when America was racially divided in a way that lawfully restricted African-Americans to only a fraction of the liberties available to whites. Not that Hefner was unaware. In fact, he supported civil rights and was willing to lose advertisers by inviting black guests to his ostentatious parties, most of which were televised. In the 1950s and 1960s, when civil rights gathered momentum, Hefner’s libertarian anti-conservatism was oddly but certainly consistent with the philosophy of protesters who sought to break apart the status quo and reorder American society. The mere fact that J. Edgar Hoover opposed Hefner endeared him to civil rights protestors, if only on the principle that the enemy of my enemy is my friend. In 1962, the publication of Helen Gurley Brown’s infamous handbook-cum-manifesto Sex and the Single Girl, which announced unapologetically that unmarried women not only had sex but actually enjoyed it, seemed perfectly congruent with Hefner’s unabashed hedonism. The book effectively told women how to enjoy sex more than they already were (indeed, if they already were). Gurley Brown’s book instructed unmarried women how to look their best, have rewarding affairs and ultimately snag a man for keeps. Hefner would not have objected. He had nothing against the institution of marriage; in fact in 1989, he got married himself. But, if Hefner enjoyed the tacit approval of African-Americans and hedonic females, he engendered the wrath of women’s groups, especially in the 1970s, when what was then called women’s liberation became a worldwide force. It’s difficult to imagine any “women’s libber,” as they were known, even pausing to consider Hefner’s arguments about freedom of expression and consumer choice. Gloria Steinem famously reasoned that “there are times when a woman reading Playboy feels a little like a Jew reading a Nazi manual.” Susan Brownmiller’s excoriation typifies the response of liberated women: “The role that you [Hefner] have selected for women is degrading to women because you choose to see women as sex objects, not as full human beings.” Male Chauvinist Pig The term objectification that describes the depiction or treatment of women as sex objects is common today. It was probably the feminist critique of Hefner and Playboy that introduced the idea that women’s historical and contemporary entrapment in lower-paying jobs, domestic roles or other kinds of subordinate positions was not just complemented by but actually sustained by their cultural representation. This was another way of saying Hefner was a male chauvinist pig (to use a putdown of the 1970s), but a rutting pig with his own key to the pigpen. Hefner’s usual indifference to criticism was worn bare by feminists, and he came to see them as his natural enemy. For him, their self-righteous attacks were not just on him, but on the notion of natural heterosexual relationships — what we’d now call heteronormativity, meaning the view that heterosexuality is the normal orientation. His ire manifested in a specially commissioned article written by the psychologist and science writer Morton Hunt. The article bore the title “Up Against the Wall, Male Chauvinist Pig.” This was a play on a popular expression of the time — up against the wall, motherfuckers — which was used by anarchists and rebels of all stripes. Hefner, once a rebel himself, was turning the gun on the new rebels. It might have looked as if Hefner was finished, and an objective prognosis in the mid-1970s would have been that the sky was about to fall in on Playboy. Anything but: Sales hit a peak in 1972. That same year, Ms. magazine introduced a very different kind of publication, one that seemed no obvious threat to Playboy, but nevertheless signaled a new direction for popular glossies. The AIDS pandemic had the effect of stirring up the religious right. Playboy clubs, which had become staple parts of the franchise, started to fold. The Meese Commission on Pornography had a negative impact on magazine sales. Hefner personally was affected by the suicide of a close associate who overdosed on drugs. His reputation also suffered as a result of his indirect connection to the Dorothy Stratten scandal, in which the 1980 playmate of the year was killed by her husband. In 1985, Hefner had a stroke and, for all intents and purposes, that seemed to be the end of the Playboy era for good. The Blonde Period As we know, this was not the case. But its relevance gone and its struggle to remain current under ceaseless attack, Playboy went into slow decline. Hefner himself receded from public view, appearing only occasionally, always in his silk bedroom attire and always flanked with gorgeous women (usually blonde). As he once quipped: “Picasso had his pink period and his blue period. I am in my blonde period right now.” In 2016, the decision to drop nude photographs seemed a desperate attempt to stay alive. But Playboy without a nude centerfold was like a Terminator film without Arnold Schwarzenegger. Earlier this year, the decision was reversed, and Playboy was fully restored. Today it seems a fish out of water, and the probability is that Playboy will cease publication over the next few years. Hefner, though, will live on. A defiant character in almost every respect, Hefner was a man possessed of a belief in his own rightness. He was probably right — once. But times change and, as they did, Hefner was left behind, stranded in culture of the middle and late 20th century. Paradoxically, his warring with feminism was probably a factor in Hefner’s commercial longevity. Those who resented what they saw as the excesses of feminism in the 1980s and even 1990s perhaps consciously patronized Hefner’s cussed, determined efforts to oppose it. In end though, Playboy was a high-gloss anachronism, albeit one that tells a story of sex in an era of rapid cultural change. The views expressed in this article are the author’s own and do not necessarily reflect Fair Observer’s editorial policy. Support Fair Observer We rely on your support for our independence, diversity and quality. For more than 10 years, Fair Observer has been free, fair and independent. No billionaire owns us, no advertisers control us. We are a reader-supported nonprofit. Unlike many other publications, we keep our content free for readers regardless of where they live or whether they can afford to pay. We have no paywalls and no ads. In the post-truth era of fake news, echo chambers and filter bubbles, we publish a plurality of perspectives from around the world. Anyone can publish with us, but everyone goes through a rigorous editorial process. So, you get fact-checked, well-reasoned content instead of noise. We publish 2,500+ voices from 90+ countries. We also conduct education and training programs on subjects ranging from digital media and journalism to writing and critical thinking. This doesn’t come cheap. Servers, editors, trainers and web developers cost Please consider supporting us on a regular basis as a recurring donor or a Will you support FO’s journalism? We rely on your support for our independence, diversity and quality.

https://www.fairobserver.com/region/middle_east_north_africa/hugh-

en

A Comprehensive Guide to Keyword Research for Better SEO Keyword research is the backbone of any strong digital marketing strategy, particularly when it comes to Search Engine Optimization (SEO). Understanding and implementing this crucial step can significantly boost your website’s visibility and drive more organic traffic. This guide aims to provide a comprehensive overview of keyword research, its importance, and how to effectively conduct it for better SEO. Let’s start by understanding what keyword research is. It is the practice of identifying popular words and phrases people enter into search engines when looking for a specific product, service, or topic. The goal is to optimize your content around these keywords, enabling your website to appear in the search results when these queries are made, thus driving more traffic to your site. The process of keyword research typically involves three key steps: Identification, Analysis, and Implementation. Let’s dive deeper into each of these. Identification is the first step in conducting keyword research. Tools like Google Keyword Planner or MJSoft can help you identify potential keywords related to your business or industry. These tools provide valuable insights such as search volume, keyword difficulty, and more. For example, if you’re a software company, you might contact MJSoft to identify keywords like “Software development services,” “Software solutions,” or “Custom software development.” Once you’ve identified potential keywords, the next step is analysis. This involves evaluating the relevance of these keywords to your content, their search volume, and competitiveness. MJSoft can help you with this analysis, providing detailed metrics that can guide your decision-making process. The final step is implementing these keywords in your content. This process involves strategically placing these keywords in various elements of your site, such as the title, meta description, header tags, and body content. Remember, keyword stuffing is frowned upon by search engines; the aim should be to incorporate keywords naturally and meaningfully. Benefits of Keywords Research - One of the primary benefits is gaining a deeper understanding of your audience. By identifying the specific words and phrases they employ when searching for products or services similar to what you offer, you can customize your content to cater to their needs and pique their interest. This not only enhances the quality of your writing but also increases the likelihood of capturing their attention. - It enhances your SEO performance. Search engines like Google use keywords to understand the content of a webpage. By optimizing your content with relevant keywords, you improve your chances of ranking higher on search engine results pages (SERPs). - Understanding your audience’s search queries is essential for informing your content strategy. By gaining insights into what they are looking for, you can create valuable and engaging content that directly addresses their questions and solves their problems. This targeted approach enhances the quality of your content, making it more relevant and captivating for your audience. Conducting keyword research is a crucial step that can greatly boost your online visibility and drive organic traffic to your website. It’s important to keep in mind that hiring MJSoft can simplify this process, making your keyword research more efficient and effective. So, embark on your keyword research journey today and elevate your SEO to new heights! Contact us to learn more about SEO services Frequently Asked Questions (FAQs) about Keyword Research for SEO Q1: What is keyword research in SEO? Keyword research in SEO is the process of identifying popular words and phrases that people use in search engines to find a specific product, service, or topic. By optimizing your content around these keywords, your website can appear in the search results for these queries, driving more organic traffic to your site. Q2: Why is keyword research important for SEO? Keyword research is crucial for SEO as it helps you understand what your target audience is searching for online. By optimizing your content with the right keywords, you can rank higher on search engine results pages (SERPs), drive more organic traffic to your site, and improve your SEO performance. Q3: How do I conduct keyword research? The process of keyword research typically involves three main steps: Identification, Analysis, and Implementation. Tools like Google Keyword Planner or hiring an SEO agency like MJSoft can help identify potential keywords related to your business or industry. You then analyze these keywords for their relevance, search volume, and competitiveness. Finally, you implement these keywords strategically in your content. Q4: What is keyword stuffing and why should I avoid it? Keyword stuffing refers to the overuse of keywords in your content. It’s a black-hat SEO technique that’s heavily penalized by search engines. While it’s important to incorporate keywords into your content, they should be used naturally and meaningfully. Overusing keywords can lead to a poor user experience and can harm your site’s ranking. Q5: What benefits does keyword research offer? Keyword research provides several benefits. It gives you a deeper understanding of your audience and their search behavior, enhances your SEO performance, and informs your content strategy. By understanding your audience’s search queries, you can create content that is valuable, relevant, and engaging, which ultimately improves your site’s performance.

https://mjsoft.ca/blog/a-comprehensive-guide-to-keyword-research-for-

en

The Indo-Tibetan Border Police (ITBP) Force was raised on 24 October, 1962. At present, the ITBP guards 3,488 km long India-China borders ranging from the Karakoram Pass in Ladakh to Jachep La in Arunachal Pradesh. Apart from this, the Force also has important roles in many internal security duties and operations against the Left Wing Extremism in the state of Chhattisgarh. Most of the ITBP’s Border Out Posts (BOPs) are located at altitudes ranging from 9,000 ft to 18,800 ft where temperatures drop to minus 45 degrees Celsius in extreme winters. ITBP is a specialized Armed Police Force of the Nation which trains its personnel in various disciplines including mountaineering and skiing apart from intensive tactical training, thereby creating a distinctive image of the Force. ITBP also conducts relief and rescue operations as 'First Responders' for natural calamities in the Himalayan region. The Force has responded in hundreds of search, rescue & relief operations over the years to provide succour to thousands of citizens in distress due to various calamities. The Force has a glorious history of the past 6 decades in which the jawans of the ITBP have made many sacrifices in the line of duty and in the service of the Nation. भारत तिब्बत सीमा पुलिस (आईटीबीपी) बल की स्थापना 24 अक्टूबर, 1962 को हुई थी। वर्तमान में आईटीबीपी लद्दाख में काराकोरम दर्रे से अरुणाचल प्रदेश में जाचेप ला तक 3,488 किमी. लंबी भारत-चीन सीमा की सुरक्षा के लिए तैनात है। इसके अलावा बल कई आंतरिक सुरक्षा कर्तव्यों एवं छत्तीसगढ में वामपंथ उग्रवाद के विरूद्ध अभियानों में भी महत्वपूर्ण भूमिका निभा रहा है। बल की अधिकांश सीमा चौकियां 9,000 फीट से 18,800 फीट तक की ऊंचाइयों पर स्थित हैं जहां तापमान शून्य से 45 डिग्री सेल्शियस तक नीचे चला जाता है। आईटीबीपी राष्ट्र का एक विशेष सशस्त्र पुलिस बल है जो अपने जवानों को गहन सामरिक प्रशिक्षण के अलावा पर्वतारोहण और स्कीइंग समेत अन्य कई विधाओं में प्रशिक्षित करता है जिससे बल की एक विशिष्ट छवि है। आईटीबीपी हिमालय क्षेत्र में प्राकृतिक आपदाओं के लिए 'फर्स्ट रेस्पोंडर' के रूप में राहत व बचाव अभियानों का संचालन भी करती है। इसने गत वर्षों में सैकड़ों खोज, बचाव व राहत अभियान संचालित किए हैं और हजारों नागरिकों को बचाया गया है तथा विभिन्न आपदाओं में मदद पहुंचाई है। बल का पिछले 6 दशकों का स्वर्णिम इतिहास रहा है जिस दौरान बल के जवानों ने विभिन्न सुरक्षा दायित्वों में अनेकों बलिदान दिए हैं।

https://www.itbpolice.nic.in

en

These brain facts dispel many brain myths based on outdated knowledge. Learn how the brain works, for better (or worse). All facts cite original references. There are a lot of myths and misinformation about the brain that pass for brain “facts.” This is somewhat understandable — the study of the human brain is one of the least explored areas in science. Even experts agree that there is more that we don’t know about the brain than we currently do know. In recent years, our knowledge of the brain has exploded. Most of what we know about the brain has been discovered in the last 15 years. And it’s estimated that it takes an average of 17 years for a new medical discovery to go mainstream. So, many brain facts just haven’t found a place in the public’s awareness yet. We will continue to update this article as new information comes to light. Human Brain Facts by the Numbers The most complex manifestation of intelligence that we know of resides between our ears. Here are some incredible numerical facts about the human brain. 1. The typical brain comprises about 2% of the body’s total weight but uses 20% of its total energy and oxygen intake. 2. Your brain is 73% water. It takes only 2% dehydration to affect your attention, memory, and other cognitive skills. 3. Ninety minutes of sweating can temporarily shrink the brain as much as one year of aging. 4. The brain weighs about three pounds. Sixty percent of the dry weight is fat, making the brain the most fatty organ in the body. 5. Twenty-five percent of the body’s cholesterol resides within the brain. Cholesterol is an integral part of every brain cell. Without adequate cholesterol, brain cells die. I hear this question often. Here's my answer: #1 Live a brain-healthy lifestyle first (Be Brain Fit tells you how). #2 Give Mind Lab Pro a try. This brain supplement meets all 12 of my requirements for a high-quality brain supplement, including effectiveness, safety, purity, and value. So it's easier for you to be mentally sharper, positive, and more productive. Choosing the right brain supplement is all about quality. See why I recommend Mind Lab Pro. 6. No one knows for sure, but the latest estimate is that the brain contains roughly 100 billion brain cells. 8. A piece of brain tissue the size of a grain of sand contains 100,000 neurons and 1 billion synapses, all communicating with each other. 9. All brain cells are not alike. 10. Your brain needs a constant supply of oxygen. As little as five minutes without oxygen can cause some brain cells to die, leading to severe brain damage. 11. Babies have big heads to hold rapidly growing brains. A 2-year-old’s brain is 80% of adult size. During some developmental periods, 250,000 neurons are added every minute. 12. As any parent of a teen can attest, teenage brains are not fully formed. It isn’t until about the age of 25 that the human brain reaches full maturity. " Think you’re in control of your life? Don’t be so sure. Ninety-five percent of your decisions take place in your subconscious mind. 13. Brain information travels up to 268 miles per hour. This is faster than Formula 1 race cars which top out at 240 mph. 14. The human brain is extremely energy efficient and runs on about 20 watts of electricity. This is the same amount needed to power a couple of low-wattage LED light bulbs. 15. There’s a reason the brain has been called a “random thought generator.” According to the Laboratory of Neuro Imaging at the University of Southern California, the average brain generates 48.6 thoughts per minute. This adds up to a total of 70,000 thoughts per day. 16. Every minute, 750-1,000 milliliters of blood flows through the brain. This is enough to fill a bottle of wine or liter bottle of soda. 17. Your brain can process an image that your eyes have seen for as little as 13 milliseconds — less time than it takes for you to blink. Fun Facts About Brain Size Size matters with some things, but with the brain, bigger doesn’t always mean better or smarter. 18. In general, men’s brains are 10% bigger than women’s, even after taking into account larger body size. However, the hippocampus, the part of the brain most strongly linked to memory, is typically larger in women. 19. Albert Einstein’s brain weighed 2.71 pounds (1,230 grams) — 10% smaller than the average of 3 pounds (1,360 grams). However, the neuron density of his brain was greater than average. 20. Neanderthal brains were 10% larger than our Homo sapiens brains. 21. While humans have the largest brains proportional to body weight of all animals, we don’t have the biggest brains. That distinction belongs to sperm whales with 17-pound brains. 22. Human brains have gotten significantly smaller over the past 20,000 years. The lost volume is equivalent to the size of a tennis ball. 23. The hippocampus, the part of the brain considered the “memory center,” is significantly larger in London cab drivers. This is due to the mental workout they get while navigating the 25,000 streets of London. The Effects of the Modern Lifestyle on the Brain Our modern lifestyle is changing our brains. And it’s not all for the better. It’s almost impossible to live a lifestyle that provides all the nutrients needed for good brain health and performance. The reason? All of us confront multiple nutrient thieves — stress, poor diet, insomnia, pharmaceuticals, pollution, and more — that steal nutrients that the brain needs to thrive. - Provides the building blocks to create new brain cells and brain chemicals - Helps increase resilience to stress to avoid mental burnout - Supplies the brain with the fuel it needs for mental energy A foundational principle of mental health and cognitive performance is to supply the body with the best nutrition possible. See why I recommend Performance Lab. 24. Chronic stress and depression are rampant in modern life. Either can cause measurable brain shrinkage. 25. The modern diet is low in omega-3 essential fatty acids. Low levels of omega-3s result in brain shrinkage equivalent to two years of structural brain aging. 27. Technology has forced most of us to be prodigious multitaskers. But the brain can’t learn or concentrate on two things at once. What it can do is quickly toggle back and forth between tasks. But doing so decreases your attention span, ability to learn, short-term memory, and overall mental performance. Attempting to multitask can temporarily reduce your IQ by up to 15 points. They are more likely to forget what day it is or where they put their keys than their parents. 29. Brain cells will cannibalize themselves as a last-ditch source of energy to ward off starvation. So, in very real ways, dieting, especially low-fat diets, can force your brain to literally eat itself. 31. Relying on GPS to navigate destroys your innate sense of direction, a skill that took our ancestors thousands of years to develop. When areas of the brain involved in navigation are no longer used, those neural connections fade away via a process known as synaptic pruning. Brain Facts Update: Myths Debunked Rapid advancements in neuroscience mean that information gets outdated fast. This is one reason that there’s a lot of misinformation and myths floating around about the brain. New evidence has shown that these commonly accepted brain “facts” are not true. 32. You’ve probably heard that attention spans are getting shorter. And that the average person’s attention span is shorter than that of a goldfish. This “fun but alarming” fact turns out not to be true. There’s no evidence that human attention spans are shrinking or that goldfish have particularly short attention spans either. 33. The popular myth that we use only 10% of our brains is flat-out wrong. Brain scans clearly show that we use most of our brain most of the time, even when we’re sleeping. 34. There is no such thing as a left-brain or right-brain personality/skill type. We are not left-brained or right-brained; we are all “whole-brained.” 35. In spite of what you’ve been told, alcohol does not kill brain cells. What excessive alcohol consumption can do is damage the connective tissue at the end of neurons. 36. The “Mozart effect” has been debunked. While listening to certain kinds of music can improve memory and concentration, there’s nothing unique about listening to Mozart. 37. You may have heard that we have more brain cells than there are stars in the Milky Way, which is a beautiful sentiment that probably isn’t true. It’s estimated that there are 100 billion neurons in the human brain. It’s also estimated that there are at least 100 billion stars in the Milky Way but that number may be as high as 400 billion. 38. It’s often said that there are 10,000 miles of blood vessels in the brain. In fact, that number is closer to 400 miles — still a substantial amount. 39. Contrary to the prevailing medical belief, having high total cholesterol is not bad for your brain. (See #5) Actually, the brain largely consists of fat and cholesterol, and having high cholesterol has been found to reduce the risk of dementia. 40. Until recently, it was a “fact” that you were born with a set level of intelligence and a certain number of brain cells that could never be changed. But it has since been discovered that our brains have the capacity to change throughout our lifetimes due to a property known as brain plasticity. The brain can continue to form new brain cells via a process known as neurogenesis. Facts About the Brain and Memory It was once thought that the brain recorded memories like a camera, but this is a vast oversimplification. Rather than being discrete recordings of experience, memory-making is more akin to the creation of improvisational jazz. 41. Memory is more accurately considered an activity or a process rather than being associated with a specific area of the brain. Any given memory is deconstructed and distributed in different parts of the brain. Then, for the memory to be recalled, it must be reconstructed from the individual fragments. 42. The brain starts slowing down at the ripe old age of 24, but peaks for different cognitive skills at different ages. In fact, at any given age, you’re likely getting better at some things and worse at others. An extreme case is vocabulary skills which may peak as late in life as the early 70s. 43. If you were drinking alcohol and don’t remember what you did last weekend, it’s not because you forgot, but because you never remembered in the first place. When you reach a certain level of drunkenness, your brain becomes incapable of forming new memories. 44. It’s generally believed that people with exceptional memories are born that way, but this is rarely the case. Most memory masters will tell you that having an outstanding memory is a skill they developed by employing the best memory techniques. Facts About Brain Form and Function The human brain’s design and function are uniquely amazing. 45. Human brain tissue is not dense. It’s very fragile — soft and squishy similar to the consistency of soft tofu or gelatin. 46. The brain produces a half cup of fluid every day. It floats in this bath of cerebrospinal fluid which acts as a shock absorber to keep the brain from being crushed by its own weight. 47. Sometimes, half a brain can be as good as a whole one. When surgeons operate to stop seizures, they remove or disable half of the brain in a procedure known as a hemispherectomy. Amazingly, patients experience no effect on personality or memory. 48. Your brain has a pattern of connectivity as unique as your fingerprints. 49. Although pain is processed in the brain, it has no pain receptors and feels no pain. This explains how brain surgery can be performed while the patient is awake, with no pain or discomfort. Headache pain feels like it starts in the brain, but, in fact, is caused by sensations from nearby skin, joints, sinuses, teeth, blood vessels, or muscles. 50. Brain freeze sure feels like pain in the brain, but it’s an example of referred pain emanating from the roof of the mouth. Fortunately, brain freeze does not freeze brain cells because frozen brain cells rupture and turn to mush. 51. The brains of introverts and extroverts are measurably different. 52. According to research performed at the University of Cambridge, the order of letters in a written word doesn’t matter much to the brain. As long as the first and last letters are in the right spot, your brain can rearrange the letters to form words as fast as you can read. This is why most people can easily make sense of this jumble of letters: Aoccdrnig to a rscheearch at Cmabrigde Uinervtisy, it deosn’t mttaer in waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht the frist and lsat ltteer be at the rghit pclae. The rset can be a toatl mses and you can sitll raed it wouthit porbelm. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe. How the Human Brain Compares to a Computer The human brain is usually compared to the most advanced technology of the day. You might be surprised to learn that, in every way that it’s been tested, the brain is still far superior to the most powerful computers in existence. 53. Your brain’s storage capacity is considered virtually unlimited. It doesn’t get “used up” like RAM in your computer. 54. The latest research shows that the brain’s memory capacity is in the petabyte range. A petabyte is a quadrillion, or 1015, bytes. Astoundingly, this is about the same amount needed to store the entire internet! 55. The human brain is capable of 1016 processes per second, which makes it far more powerful than any existing computer. 56. Researchers involved in the AI Impacts project have developed a way to compare supercomputers to brains by measuring how fast a computer can move information around within its own system. By this standard, the human brain is 30 times more powerful than the IBM Sequoia, one of the world’s fastest supercomputers. 57. Japan’s K computer is one of the most powerful computers in the world. When programmed to simulate human brain activity, it took 40 minutes to crunch the data equivalent to just one second of brain activity. Evidence That Our Brains Could Be Better You’ve seen plenty of evidence so far that our brains are truly amazing. But the brain can also work in ways that are illogical, fallible, and counterproductive. 58. There are approximately 200 known cognitive biases and distortions that cause you to think and act irrationally. 59. Memories are shockingly unreliable and change over time. Emotions, motivation, cues, context, and frequency of use can all affect how accurately we remember something. This includes “flashbulb memories” which occur during traumatic events. 60. Of the thousands of thoughts a person has every day, it’s estimated that 70% of this mental chatter is negative — self-critical, pessimistic, and fearful. 61. Think you’re in control of your life? Don’t be so sure. Ninety-five percent of your decisions take place in your subconscious mind. 62. A blood-brain barrier protects the brain by preventing many foreign substances in the vascular system from reaching the brain. But the barrier doesn’t work perfectly and many substances sneak through, some faster than others. Nicotine rushes into the brain in a mere 7 seconds. Alcohol, on the other hand, takes 6 minutes. 63. Our brains crave mental stimulation, sometimes to a fault. Hilariously, men especially would rather give themselves electric shocks than sit quietly in a room with only their thoughts. 64. The human brain is extraordinarily complex and consequently can go awry in some spectacular ways. Some of the strangest disorders include: - exploding head syndrome disorder (hearing phantom explosions in your head) - Capgras syndrome (thinking loved ones have been substituted by impostors, robots, or aliens) - Cotard’s syndrome (believing you are dead) 65. Savant syndrome is a condition in which those with serious mental disabilities have an “island of genius.” The most common areas of genius fall into one of these categories: music, art, mathematics, mechanical, or spatial skills. 66. Most savants are born that way, but a brain trauma or disease can cause sudden savant syndrome, in which otherwise ordinary people suddenly develop genius-level abilities that they didn’t have before. 67. Brain cells need a constant supply of fuel to stay alive, yet they lack the ability to store energy. Fortunately, there’s a backup system. The liver breaks down stored fat to produce ketone bodies that can be used as a substitute fuel when commonly used blood glucose is not available. Brain Facts That Are Just Plain Weird And some facts may just make you smile at the miraculous wonder that is the human brain. 68. Synesthesia is a condition where stimulation of one sense automatically evokes a perception of another sense. People with synesthesia might “taste” words, “smell” sounds, or see numbers as colors. While it’s not known exactly why this occurs, the prevailing theory is that these people have hyper-connectivity between sensory areas in the brain and that there may be a genetic component. 69. The brain in your head isn’t your only brain. There’s a “second brain” in your intestines that contains 100 million neurons. 70. While zombies do not exist, some scientists believe they could. They think it’s possible that a mutated virus or parasites could attack the brain and rapidly spread throughout large populations, essentially causing a “zombie apocalypse.” 71. The brains of Apple devotees really are different than the brains of those who use Android devices. MRIs reveal that Apple products stimulate the “god spot” in their users’ brains — the same part of the brain activated by religious imagery in people of faith. 72. Few facts about the brain are as strange as the posthumous story of Albert Einstein’s brain. The pathologist who performed Einstein’s autopsy kept the brain in a jar in his basement for 40 years. Eventually, he made a cross-country trip with the brain in a Tupperware container to deliver it to Einstein’s granddaughter. You can read the full story about one of the most bizarre road trips ever in Driving Mr. Albert: A Trip Across America with Einstein’s Brain by Michael Paterniti. To learn more about any of the brain facts in this article, click on the citation links within each brain fact. In the webpage that appears, you’ll find the study, recognized authority, or expert opinion that supports and expands on that fact. Recommended: Upgrading brain health is key to making your brain work better. Mind Lab Pro is the brain supplement I recommend because, by boosting your brain health, it can help you: - Improve your mental clarity and focus. - Boost your memory and your ability to learn. - Increase your capacity to think critically, solve problems, and make decisions. P.S. Like what you've read on this page? Get more like this -- Sign up for our emails.

http://bebrainfit.com/human-brain-facts/

en

Moderna vaccine adds to the growing list of vaccines that have been validated by WHO for emergency use. Geneva, Switzerland–30 April 2021 – Today, WHO listed the Moderna COVID-19 vaccine (mRNA 1273) for emergency use, making it the fifth vaccine to receive emergency validation from WHO. WHO’s Emergency Use Listing (EUL) assesses the quality, safety and efficacy of COVID-19 vaccines and is a prerequisite for COVAX Facility vaccine supply. It also allows countries to expedite their own regulatory approval to import and administer COVID-19 vaccines. The vaccine has already been reviewed by WHO’s Strategic Advisory Group of Experts on Immunization (SAGE), which makes recommendations for vaccines’ use in populations (i.e. recommended age groups, intervals between shots, advice for specific groups such as pregnant and lactating women). The SAGE recommended the vaccine for all age groups 18 and above in its interim recommendations dated 25 January 2021. The US Food and Drug Administration issued an emergency use authorization for the Moderna vaccine on 18 December 2020 and a marketing authorisation valid throughout the European Union was granted by the European Medicines Agency on 6 January 2021. The WHO EUL process can be carried out quickly when vaccine developers submit the full data required by WHO in a timely manner. Once those data are submitted, WHO can rapidly assemble its evaluation team and regulators from around the world to assess the information and, when necessary, carry out inspections of manufacturing sites. The Moderna vaccine is an mNRA-based vaccine. It was found by the SAGE to have an efficacy of 94.1%, based on a median follow-up of two months. Although the vaccine is provided as a frozen suspension at –25 ºC to –15 ºC in a multidose vial, vials can be stored refrigerated at 2–8 °C for up to 30 days prior to the withdrawal of the first dose, meaning that ultra-cold chain equipment may not always be necessary to deploy the vaccine. WHO emergency use listing The emergency use listing procedure assesses the suitability of novel health products during public health emergencies. The objective is to make medicines, vaccines and diagnostics available as rapidly as possible to address the emergency, while adhering to stringent criteria of safety, efficacy and quality. The assessment weighs the threat posed by the emergency as well as the benefit that would accrue from the use of the product against any potential risks. The EUL pathway involves a rigorous assessment of late phase II and phases III clinical trial data as well as substantial additional data on safety, efficacy, quality and a risk management plan. These data are reviewed by independent experts and WHO teams who consider the current body of evidence on the vaccine under consideration, the plans for monitoring its use, and plans for further studies. As part of the EUL process, the company producing the vaccine must commit to continuing to generate data to enable full licensure and WHO prequalification of the vaccine. The WHO prequalification process will assess additional clinical data generated from vaccine trials and deployment on a rolling basis to ensure the vaccine meets the necessary standards of quality, safety and efficacy for broader availability.

https://brandspurng.com/2021/04/30/who-lists-moderna-

en

No one envisaged it. Nobody saw it coming. The rage of the Covid-19 has been quite phenomenal in all ramifications. The big bull is here; the all-powerful Coronavirus and its deadly fangs have unleashed untold fear, terror and hardship on all of us. From the Americas to Asia, from Europe to Africa and from Australia to Oceania; Covid-19 has swept through the seven continents of the world like a deadly hurricane. Right now, it’s only because the Antarctica is aloof and not habitable for human beings, that’s why this daredevil cannot touch it. It’s an understatement to say that this Wuhan-born virus has wreaked untold havoc on our world and its devastating effects may take the whole world about five years to mop up, according to experts. But what is it…what is Coronavirus or Covid-19 as it’s been renamed lately? According to the World Health Organization (WHO), Coronaviruses are a large family of viruses that are known to cause illness ranging from the common cold to more severe diseases such as Middle East Respiratory Syndrome (MERS) and Severe Acute Respiratory Syndrome (SARS). Medical experts have affirmed that the virus can be transmitted from person to person, usually after close contact with an infected patient, for example, in a household, workplace, or health care facility. Coronavirus outbreak has negatively impacted on global economy in a very shocking way and world renowned economists, groups, rating agencies, business schools and top ivory towers have all been taken aback by the ravaging powers of this raging storm. According to World Economic Forum, “The shock to the global economy from COVID-19 has been both faster and more severe than the 2008 global financial crisis (GFC) and even the Great Depression. In those two previous episodes, stock markets collapsed by 50% or more, credit markets froze up, massive bankruptcies followed, unemployment rates soared above 10%, and GDP contracted at an annualized rate of 10% or more. But all of this took around three years to play out. In the current crisis, similarly dire macroeconomic and financial outcomes have materialized in just three weeks. Earlier this month, it took just 15 days for the US stock market to plummet into bear territory (a 20% decline from its peak) – the fastest such decline ever. Now, markets are down 35%, credit markets have seized up, and credit spreads (like those for junk bonds) have spiked to 2008 levels. Even mainstream financial firms such as Goldman Sachs, JP Morgan and Morgan Stanley expect US GDP to fall by an annualized rate of 6% in the first quarter, and by 24% to 30% in the second. US Treasury Secretary Steve Mnuchin has warned that the unemployment rate could skyrocket to above 20% (twice the peak level during the GFC)”. Well, it must be said that one thing saw the coming of Coronavirus and has told the world to prepare for its attendants effects on contractual agreements and business engagements – it’s named FORCE MAJEURE. To any layman out there, a force majeure could be broken down is simple terms to mean ‘‘contractual clauses which alter parties’ obligations and/or liabilities under a contract when an extraordinary event or circumstance beyond their control prevents one or all of them from fulfilling those obligations. Depending on their drafting (which differs from one country to the other), such clauses may have a variety of consequences, including: excusing the affected party from performing the contract in whole or in part; excusing that party from delay in performance, entitling them to suspend or claim an extension of time for performance; or giving that party a right to terminate. We talk principally below about parties being excused from performance entirely, but many of the principles are common to these different varieties of clause. In English and Scottish law, force majeure is a creature of contract and not of the general common law. It therefore differs from some other legal systems where force majeure is a general legal concept and where courts may declare that a particular event, such as a pandemic like Covid-19, is a force majeure event. There have been instances in the United States where force majeure situations/clauses have played significant roles in litigations arising from breach of contractual agreements by a party or the other. It’s also a known fact that the issue of force majeure is universal but its interpretations and implementations may differ from countries to countries. Coming back home, one would like to examine the clause of force majeure and how same can be summoned or provoked in this present economic realities occasioned by the Covid-19 pandemic. It must be said that Covid-19 would naturally affect a larger percentage of our sectors in Nigeria, especially the financial sector. And one isn’t sure if players in the sector are fully prepared to abide by the tenets of the force majeure clause in this present circumstance the world albeit Nigeria has found itself. I woke up in the wee hours today asking myself how many insurance companies/brokers, banks,mortgage firms,high-street lenders and other players in this sectors would without grudge succumb to the force majeure clause when the chips are down. It’s a million dollar question! At this juncture, it’s pertinent to note that Guaranty Trust Bank recently surprised industry watchers and its customers by showing empathy to via its 90-day moratorium that seeks to ease the burden of loans and other credit facilities’ repayments off its customers. Kudos must go to GT Bank for leading the way in this regard by freezing loan repayments for three months for its customers. The bank has in so doing has allayed the fears of debtors who are right now worried if their loan agreement(s) is covered by Covid-19 pandemic. This is impressive! And I think other commercial banks must take a cue from this innovative and thoughtful bank. Now, worried by what the law of the land says about force majeure in this environment, I spoke to a lawyer friend who’s an erudite legal luminary of international repute and former gubernatorial aspirant in the State of Osun – Dr. (Prince) Ayoade Adewopo – about the looming battle between Covid-19 and force majeure (with emphasis on Nigeria). My friend who holds a Doctor of Jurisprudence degree and a masters in International tax law from Universities in the US and Switzerland reckons it’s a very simple situation. According to Adewopo , ‘’the principle of force majeure differs from one country to the other, but be that as it may, any duly signed contractual agreement has to be followed to the letter by the agreed parties and this includes the clause of force majure’’. Personally, most contractual agreements which I’ve seen or have been party to normally adopt an approach to defining the type of event which may, depending on its impact, relieve a party from contractual liability: A larger percentage of the contract papers list specific events which may include events such as war, terrorism, earthquakes, hurricanes, acts of government, plagues or epidemics. Now, I think where the term epidemic, or pandemic, has been used in any contractual agreement that will clearly cover Covid-19. And the latter will have to submit to the superior contractual powers of FORCE MAJEURE. According to another seasoned legal practitioner, Mr. Efe Ize-Iyamu, FORCE MAJEURE may not win the battle between it and Covid-19 if we further break it down. Sounding a note of caution, he says… ‘’the downside of force majeure is this; even if the Coronavirus pandemic or any pandemic for that matter is a type of event covered by the force majeure clause , the next question we may want to consider is the impact on the affected party’s ability to perform its contractual obligations as it is common for force majeure clause(s) to specify the impact that the event or circumstances in question must have in order for the clause to be triggered. Ize-Iyamu further adds that “the Covid-19 crisis leading to lockdown in Lagos, Ogun and the FCT (in Nigeria) will necessarily lead to disruptions in contractual agreements, particularly in terms of delivery time, in many sectors . This disruption will trigger various disputes largely due to failure to perform or delayed performance of contractual obligations. For example questions will arise as to whether this crisis constitutes a force majeure event. This dispute should not necessarily end up in litigation, it is important that lawyers advise their clients to renegotiate (where possible) those contractual rights impacted by this crisis”. And to make matters worse for contractual agreements which are yet to run their full course before the outbreak of Covid-19 pandemic, the World health Organization (WHO) yesterday made a shocking pronouncement during a routine world press briefing by saying the Covid-19 is just starting – the world body adds definitively that the virus is going to be here with us for a long time. This invariably means that the “third world war” between Covid-19 and the force majeure continues even as countries like Japan, the US and a host of other countries in the EU are mulling the idea of dragging China to the Hague for inflicting untold hardship on the world’s inhabitants. Hmmm! I give up – it’s complex. In the meantime, good luck to our world. And let everyone just stay safe! Sola Adeyemo is a Writer,Public Affairs Analyst & Media Entrepreneur. He’s the President of Lagos State Online Media Publishers(LASOMP) and the Coalition of Online Publishers in West Africa(COPUWA). - Top Stories12 hours ago BREAKING: Ganduje Allegedly Leads Fresh Plot to Dethrone Emir Muhammad Sanusi - Top Stories12 hours ago Ighodalo To Sue Oshiomhole For ₦20B Over ‘Defamatory Ponzi Scheme Claim’ - Top Stories12 hours ago I Inherited Empty Treasury From Matawalle – Gov Lawal - News12 hours ago NIN-SIM Linkage: Telcos Begin Disconnection Of 66 Million Phone Lines - Business and Brands12 hours ago Polaris Bank announces new board appointments - Entertainment12 hours ago Sean ‘Diddy’ Combs ARRESTED - Politics12 hours ago Otedola lauds President Tinubu’s role in Dangote Refinery - Top Stories3 hours ago Lagos state gets new Commissioner of Police

https://citynewsng.com/the-raging-

en

A physician, medical practitioner, medical doctor, or simply doctor, is a professional who practices medicine, which is concerned with promoting, maintaining, or restoring health through the study, diagnosis, prognosis and treatment of disease, injury, and other physical and mental impairments. Medicine bridges the gap between science and society. Indeed, the application of scientific knowledge to human health is a crucial aspect of clinical practice. Doctors are one important agent through which that scientific understanding is expressed. But medicine is more than the sum of our knowledge about disease. Medicine concerns the experiences, feelings, and interpretations of human beings in often extraordinary moments of fear, anxiety, and doubt. In this extremely vulnerable position, it is medical professionalism that underpins the trust the public has in doctors. Importance Of Doctor In this part of the article we will look at the purpose of doctors in a society and how doctors help the community; The COVID-19 pandemic has reminded all of us of the vital role doctors play to relieve suffering and save lives. The pandemic has also highlighted the extent to which doctors are willing to go in ensuring a functioning health system and a functioning society. On a daily basis doctors also play key roles that save lives such as an emergency procedure or an elective procedure for a rather time sensitive or serious illness. An accidental injury and troubled labor also account for the same. Unfortunately, not every illness can be cured completely. But with the effort of doctors and medicines and therapies, the lifespan of the patient or onset of the worst effect of an illness can be extended significantly. Though this time varies greatly from case to case and patient to patient, the efforts behind the cause are commendable. Nobody wants to become sick, disabled or helpless. Preventing sickness or injury is a better choice: It’s less expensive, better for our health and we lose less income if we don’t get sick too often. Preventive treatment is also important for society as a whole. Many people in the U.S. and around the world can’t afford drugs, hospital stays or surgery. By promoting preventive medicine and keeping people healthy, doctors reduce the health gap between rich and poor populations. Although doctors have not been able to completely stop the current Coronavirus pandemic, they have significantly reduced mortality from the disease. Black death and smallpox have wiped out millions of people throughout history; polio paralyzed thousands in the 20th century. By working to contain potential epidemics, doctors prevent disasters. Individual doctors don’t fly solo in these crises. Fighting plagues takes money and organizations that work on a national and international scale. But doctors and other medical professionals are vitally important in the fight. Not every disease threatens the life of the patient. However, living with the discomforts for a lifetime is not an acceptable option either. The effort of doctors makes it possible to mitigate these discomforts and help live their life to the fullest. A medical practice is a small business. Most doctors employ staff and rent or buy office space, pay contractors for repairs and generally improve the community’s economic health as they improve their patients’ health. For instance in 2018, Illinois had 30,000 doctors who support 146,000 jobs and indirectly support 250,000 more. A hospital or medical practice can be an economic driver in towns too small to support most other industries. Doctors play a major role in nutritional emergencies, hunger and malnutrition are rampant among refugees and displaced populations, representing currently around 40 million people worldwide, many of whom – infants, children, adolescents, adults and older people – suffer from one or more of the multiple forms of malnutrition. In the internet age, there’s no shortage of medical malarkey flying around online. Whatever you’re suffering from, someone knows a miracle cure. Whatever you’re scared of, some website will shriek that it is much, much worse than you think. Doctors have the standing and the knowledge to push back against fake medical news. It’s not just about teaching patients the real steps to staying healthy. Sometimes it’s explaining that there is no cure and so no point to spending money trying to conjure one up. Shaping Health Policy State, local and federal governments have a big influence on our communities’ health. Is our water safe to drink? Our food safe to eat? Is there a local treatment program for alcoholics or people hooked on painkillers? If contagious disease is a threat, how does the government mobilize doctors and other professionals? Doctors are only one voice among many that shape public policy. But they have a unique position of respect and trust, which they can use to push governments toward healthcare policies that will genuinely benefit the public. A military doctor provides health care to military personnel and their families and can work in a variety of settings, including hospital ships and international medical centers. Doctors enlisted in the military might take part in international relief efforts by providing care to victims of natural disasters. The military primarily employs doctors with specializations in common types of medicine such as pediatrics, family care, and neurology. If you would like to become a military doctor, you must earn a medical degree and meet military requirements.

https://www.publichealth.com.ng/10-importance-of-a-doctor-in-a-

en

Retina surgery is performed to fix numerous sicknesses that influence the rear of the eye including the retina, vitreous, and macula. This strategy requires the expulsion of the fluid gel, situated toward the rear of the eye, called the vitreous. The absence of vitreous gel doesn't influence the working of the eye. Instruments are set in three small entry points close to the front of the eye. The primary cut is utilized to acquaint a fiberoptic light with enlightenment the eye. The subsequent cut is utilized to eliminate the vitreous gel with a little handheld cutting gadget. The third cut is utilized to inject a saline arrangement into the eye as the vitreous gel is eliminated. The body replaces the saline with its own liquid within a couple of days. The procedure is performing in a operation room, under nearby or, in uncommon cases, general sedation. The anesthesiologist will oversee the prescription through an IV, which will cause you to feel loose and drowsy. The Anesthesiologist will manage the sedation levels, all through the strategy, to keep you agreeable until your retina surgery is finished. The most widely recognized risk following Retina surgery is an expansion in the pace of cataract advancement. In many patients, a cataract can advance quickly, and frequently become sufficiently extreme to require evacuation. Other more uncommon inconveniences incorporate contamination and retinal separation. Either can happen during a surgery or a while later, yet both can be dealt with right away. Vitrectomy surgery includes many advances when used to fix complex circumstances - conditions, which can cause visual impairment and vision misfortune in our patients. Here is a portion of the extraordinary strategies used to accomplish the best result: Membrane peeling: This step includes the expulsion of fine layers from the retinal surface, utilizing miniature forceps. An extraordinary jewel tidied silicone scrubber may likewise be utilized in select patients. Film stripping is normally utilized in the maintenance of macular puckers, macular openings, retinal separations, and diabetic retinopathy. Endophotocoagulation: This is the utilization of a laser inside the eye at the hour of vitrectomy. Endo laser might be utilized to treat an undesirable retina, impacted by diabetic retinopathy. All the more explicitly, it can treat a diminishing retina, retinal openings, and retina tears or set (patch) a retinal separation. Endo-laser is much of the time used to treat spilling veins inside the eye, an optional effect of vein impediments and other retinal problems. A Centre of Excellence in Eye Care for 37 years, Bharti Eye Foundation was conceptualised and nurtured by Dr. S. Bharti in 1985. The hospital has been accredited for patient safety and quality of care by the National Accreditation Board for Hospitals and Healthcare Providers (NABH) , a constituent Board of Quality Council of India. All super-speciality eye treatment services and investigations are available under one roof. Week-Days: | 9am - 6pm | Sunday: | CLOSED | Copyright © 2022 · All Rights Reserved Bharti Eye Foundation

https://bhartieyefoundation.in/what-is-retina-surgery.html

en

Adobe After Effects Course And Certification What is Adobe After Effects? Adobe After Effects is a software application for creating endless digital visual effects and animations. Adobe After Effects is used in producing digital visual effects, graphics, applications and in the production of movies. Some of the effects that it can be used for are following, keying, tracking, framing, animating, and composition. Adobe After Effects also works as a Simple Non-linear Editor, Audio/Video Editor, and Media Lite. Adobe After Effects Creation and Development. Its first two versions were originally developed by a company from Rhode Island in Providence, firstly as Adobe After Effects 1.0 in January 1993 and 1.1. Adobe's first innovation in Adobe After Effects is Adaptation 3.0. Why Adobe After Effects? 1. 3D Design: With Adobe After Effects you can create, composite, and stylize 2D footage layers in 3D space. Adobe After Effects serves a different role depending on the user’s needs. A video editor might use After Effects more for title design, and an animator might use it for creating 2D cartoon characters. The reason why so many people have trouble defining what After Effects does is simply due to the fact that it does so many things, and does them well. In an editing context, Adobe After Effects is usually used to apply effects after your footage has been roughly edited. 2. Easy To Use: After Effects is actually very simple in the way it’s structured. Just like every video editing application in the world, After Effects uses a layering system. 3. Simulation Effect: There are 18 simulation effects built into Adobe After Effects. These simulation effects can be used to create anything. All of these effects are completely customizable. When you pair them with other effects, you can take their functionality much further. 4. Effects Library: This makes After Effects unique from all the other video applications is its vast effects library. There are literally hundreds of built-in effects that can be combined to create an unlimited number of creative possibilities. 5. Stylized Effects: After Effects are useful for giving your videos and layers styles that would have been impossible otherwise. These drag-and-drop effects can be manipulated easily to create amazing looks and styles. Notable effects in this category include the CC Glass effect and the posterize effect. It also includes a perspective category that includes a 3D Camera Tracker effect that makes it easy to track your video footage Features and Benefits of Adobe After Effects 1. Adobe After Effects makes a big scene bigger in movies and television. 2. It can easily make creative movie titles, introductions, and other overlay visual effects. 3. Adobe After Effects can generate fire or make a rainfall. 4. Adobe After Effects can easily create logos and animations quite easily and brilliantly. 5. It helps in generating motion graphics and visual effects on a huge scale effectively. 6. Adobe After Effects is used in creating advanced visual effects in videos, web, film, and television. 7. It helps the artists, web developers in making visual graphics and special visual effects for film, TV, video and for the web. 8. It has unlimited impacts and awesome outcomes in rendering. 9. Adobe After Effects can be used to link photographs or send or hide logos to produce incredible results. 10. Adobe After Effects creates unimaginable and wonderful animations. 11. It can effectively create anything from logos, images, and animations to keyframes and articulations. 12. Adobe After Effects works easily with other Adobe applications. It is compatible and can be used with other Adobe applications. 13. You can easily and effectively make a composition and look it in Premiere Pro with Adobe Dynamic Link. Import work from Photoshop, Illustrator, Animator, Adobe XD, and Animate. You can now with ease use the Project Team to collaborate with editors wherever they are. 14. Adobe After Effects is interconnected with about 300 software and hardware partners worldwide. 15. Adobe After Effects is a great artistic and creative tool for creating various extensive visual effects and a wonderfully wide range of animations in movies, videos, television and games in various visual dimensions. In the Full course, you will learn everything you need to know about Adobe After Effects with Certification to showcase your knowledge skill/gained upon successful completion of the exams. Adobe After Effects Course Outline Adobe After Effects - Introduction Adobe After Effects - Work with Compositions Adobe After Effects - Create and Animate Text Adobe After Effects - Repair Video Adobe After Effects - Build Custom Transitions Adobe After Effects - Create Visual Effects Adobe After Effects - Create Animated Backgrounds Adobe After Effects - Select and Animate Layers Adobe After Effects - Work with 3D Adobe After Effects - Render Your Work Adobe After Effects - How Layers Build Compositions Adobe After Effects - Adding layers to a Composition Adobe After Effects - Position and Distribute Layers in a Composition Adobe After Effects - Position 2D Layers in 3D Space Adobe After Effects - Keyframe Animation Adobe After Effects - Animate an Object to Follow a Path Adobe After Effects - Create Dynamic Movement between keyframes with Graph Editor Adobe After Effects - Control animation of Multiple Parenting Adobe After Effects - Use Expressions to Create Movement without keyframes Adobe After Effects - Paint Animated Brush Strokes Adobe After Effects - Intro to the Clone Stamp Adobe After Effects - Isolated elements with the Roto Brush Adobe After Effects - Refine edges of a Roto Brush Selection Adobe After Effects - Remove unwanted Elements with Content-Aware Fill Adobe After Effects - Create Shape Layers Adobe After Effects - Draw Complex Shapes Adobe After Effects - Animate Shape Layers Adobe After Effects - Add Animation Properties to Shape Layers Adobe After Effects - Convert illustrator Layers into Shape Layers Adobe After Effects - Video Lectures Adobe After Effects - Exams and Certification

https://siitgo.com/blog/adobe-after-effects-course-and-certification/37

en

Solar Cables are high-quality electrical cables specifically designed for use in solar power systems. They are made of materials that can withstand extreme temperatures, UV radiation, and moisture. Solar Cables ensure safe and efficient transmission of electricity throughout the system, and come in various sizes and lengths to accommodate different system configurations. Solar Cables are certified to meet international safety standards, such as TUV and UL, to ensure their quality and reliability. They have a long service life, often lasting up to 25 years or more, and are designed to minimize power losses, maximizing overall system efficiency. Commonly used specifications include 4mm², 6mm², and 10mm² wire sizes.

https://www.kukacable.com/SOLAR_CABLE/

en

Bearded men have more germs than dogs. PHOTO: Men’s beards carry more germs than dogs do in their fur, a study has found. Scientists looked at the levels of bacteria lurking in 18 men’s facial hair and 30 dogs from different breeds. “The researchers found a significantly higher bacterial load in specimens taken from the men’s beards compared with the dogs’ fur,” Professor Andreas Gutzeit, of Switzerland’s Hirslanden Clinic, said. The study was designed to find out if there was a risk of humans picking up a disease from dogs if they used the same MRI scanner as a vet, reports the Mail on Sunday. It found that all the man, aged from 18 to 76, had high microbial counts – while seven had bacteria which were hazardous to human health. Only 23 of the dogs had high microbial counts, with the rest being moderate. When the MRI scanners were disinfected, researchers found higher levels of bugs after the men had used it. “On the basis of these findings, the animal can be considered as clean compared with bearded men,” said Dr Gutzeit. Still, men with beards were also found to be better boyfriends in a separate study – so you may have some weighing up to do, Metro.co.uk reported. Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

https://www.vanguardngr.com/2019/04/revealed-bearded-men-carry-more-

en

Life - The Midweek Magazine February 26, 2020 by The Nation Just a little longer By Lanre Amodu When talking of legendary companies that practically shaped the world and the way it is perceived, it is difficult not to mention Kodak. The company was a giant in the business of capturing the moment and preserving memories. The Eastman Kodak Company, simply known as Kodak, was established in 1888 by George Eastman and Henry A, Strong. For the most part of the 20th century, Kodak remained dominant in the business of photographic film. From inception, the strategy of the company was to sell inexpensive cameras. However, the large profit margin came from the sale of consumables such as film, paper and chemicals. One of Kodak’s engineers, Steve Sasson, invented the first ever digital self-contained camera in 1975. While it wasn’t the first camera to produce digital images, it was the first to be portable- hand-held. The invention was so significant to the evolution of photography that in 2009, Steve Sasson was awarded by President Barack Obama the National Medal of Technology and Innovation, which was the highest honour that the United States government can bestow on an inventor or a scientist. He was also awarded the Progress Medal and Honorary Fellowship of the Royal Photographic Society in 2012. Considering how huge the invention was, it must have perpetuated Kodak as a market leader right? Wrong! Actually, Kodak only shelfed it and didn’t use it. Recall that I mentioned earlier that the major source of profit for the company was the sales of consumable; the portable digital camera would have affected the company’s sales of films because the camera was filmless. To avoid “spoiling its own market by its own product”, Kodak management decided to maintain the existing business model. As at 1976, Kodak enjoyed 90% sales in the film market and 85% sales in the camera market in the U.S. It was difficult to imagine a future that wouldn’t have film in it! So confident was Kodak of its status that it turned down the opportunity to serve as the official film for the Los Angeles Olympics of 1984. Nature abhors vacuum, they say, so Fujifilm had its much need opportunity to win the sponsorship rights. That opportunity established Fujifilm, a Japanese company, as a force in the U.S. and it went on to open its plant, embark on aggressive marketing and take over the market. Meanwhile, Kodak was unsuccessful in penetrating the Japanese market and even filed a complaint with the World Trade Organisation, which was rejected. Finally, Kodak faced its fears of the impending digital age; the company embarked on a decade-long journey in the 1990s to migrate to digital photography. They employed several strategies unsuccessfully to delay the digital era. Several of their customers had already migrated. Soon, the company began to struggle due to a decline in sales and its slowness to migrate to digital photography. It is ironic that 2012, the year that Steve Sasson received a Progress Medal from the Royal Photography Society for his outstanding contributions, particularly the invention of the portable digital camera, was the same year Kodak filed for bankruptcy. Fujifilm, on the other hand, was reported to have handled the migration quite well. According the reports, as far back as the early 1980s, the company had started to evolve plans for the switch. The three-pronged strategy included the plan to squeeze as much money as it could from the film business, to prepare for the digital migration and to develop new business lines. As at 2018, the company acquired 50.1% controlling shares in Xerox for $6.1 billion. The worst problem you can have is to be afraid of your own ideas and your own future. Rather than struggle to hold on to a passing trend, prepare yourself for the future. If you don’t innovate, someone else will. Thanks for reading my article today. I would really love to hear from you. So, do share your views with me by sending SMS to 07034737394, visiting www.olanreamodu.com and following me on twitter @lanreamodu. Remember, if you can change your mind, you can change your life. Grow your mind and every other thing will catch up!

https://thenationonlineng.net/just-

en

March 5, 2020 by The Nation Coronavirus: Research reveals where it lingers, how to kill it New research from Singapore published shows that patients with the novel coronavirus extensively contaminate their bedrooms and bathrooms, underscoring the need to routinely clean high-touch surfaces, basins and toilet bowls. The virus was, however, killed by twice-a-day cleaning of surfaces and daily cleaning of floors with a commonly used disinfectant — suggesting that current decontamination measures are sufficient as long as people adhere to them. The research letter was published in the Journal of the American Medical Association and comes after Chinese cases in which the pathogen spread extensively through hospitals, infecting dozens of health care workers and other patients. This led scientists to believe that, beyond catching the infection through coughing, environmental contamination was an important factor in the disease’s transmission, but its extent was unclear. Researchers at Singapore’s National Center for Infectious Diseases and DSO National Laboratories looked at the cases of three patients who were held in isolation rooms between late January and early February. They collected samples from the rooms on five days over a two-week period. The room of one patient was sampled before routine cleaning, while the rooms of the other two patients were sampled after disinfection measures. The patient whose room was sampled before cleaning had the mildest symptoms of the three, only experiencing a cough. The other two had moderate symptoms: Both had coughing and fever, one experienced shortness of breath and the other was coughing up mucus. Despite this disparity, the patient whose room was sampled before cleaning contaminated 13 of 15 room sites tested, including a chair, the bed rail, a glass window, the floor and light switches. Three of the five toilet sites were also contaminated, including the sink, door handle and toilet bowl — more evidence that stool can be a route of transmission. Air samples tested negative, but swabs taken from air exhaust outlets were positive — which suggests that virus-laden droplets may be carried by air flows and deposited on vents. The two rooms that were tested after cleaning had no positive results. “Significant environmental contamination by patients with SARS-CoV-2 through respiratory droplets and fecal shedding suggests the environment as a potential medium of transmission and supports the need for strict adherence to environmental and hand hygiene,” the authors wrote. SARS-CoV-R is the official name of the pathogen.

https://thenationonlineng.net/coronavirus-research-reveals-where-it-lingers-

en

The Russian government has authorised the use of an anti-malarial drug to treat coronavirus patients despite international concerns over its safety and effectiveness. The government published an order late Thursday allowing the use of hydroxychloroquine on patients after China donated more than 68,000 packs of the tablets to Russia. The order was published after President Vladimir Putin had a phone conversation with Chinese leader Xi Jinping on Thursday evening. It said the drug would be distributed to hospitals that are caring for patients who have tested positive for coronavirus or are suspected of having it. It said the drug’s safety and effectiveness will be monitored by the state health watchdog. Hydroxychloroquine has been used for decades against malaria and is being tested worldwide against the virus along with another anti-malarial drug, chloroquine. Both have potentially serious side effects, especially in high doses or when administered with other medications, and their use to treat the virus is still experimental, without having gone through exhaustive clinical testing. Some see them as a potential weapon in the fight against the virus while there is still no proven cure or vaccine. Hydroxychloroquine has shown early promise against COVID-19 in small-scale studies in France and China to reduce virus levels among people badly infected. US President Donald Trump has touted it as a coronavirus treatment and in the US a limited emergency-use authorisation has been granted to the drug. But many scientists are urging caution until larger trials show whether it is safe and effective. The European Medicines Agency has said that both chloroquine and hydroxychloroquine need to go through clinical trials and should not be used to treat virus cases unless there is a “national emergency.” Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

https://www.vanguardngr.com/2020/04/russia-

en

Throughout American history, there have always been women who have spoken out for what's right, even when they have to fight to be heard. In early 2017, Senator Elizabeth Warren's refusal to be silenced in the Senate inspired a spontaneous celebration of women who persevered in the face of adversity. In this book, Chelsea Clinton celebrates thirteen American women who helped shape our country through their tenacity, sometimes through speaking out, sometimes by staying seated, sometimes by captivating an audience. They all certainly persisted. With vivid, compelling art by Alexandra Boiger, this book shows readers that no matter what obstacles may be in their paths, they shouldn't give up on their dreams. Persistence is power. This book features: Harriet Tubman, Helen Keller, Clara Lemlich, Nellie Bly, Virginia Apgar, Maria Tallchief, Claudette Colvin, Ruby Bridges, Margaret Chase Smith, Sally Ride, Florence Griffith Joyner, Oprah Winfrey, Sonia Sotomayor -- and one special cameo. You can find more stories of women who persisted worldwide in the companion book She Persisted Around the World: 13 Women Who Changed History.

https://www.amightygirl.com/she-persisted

en

December 9, 2018 by The Nation Big bad bureaucracy? For those who might say, why this rather provocative title: Big Bad Bureaucracy? There are three things about the title that makes it an intriguing one for me. First, there is the direct allusion to the folktale stories of the big bad wolf we are all familiar with, especially in Aesop’s fables. The big bad wolf has come to signify an antagonist that is both menacing and even predatory. For instance, in “Little Red Riding Hood,” we saw the role the big bad wolf played in tricking the girl and killing her grandmother in other to deceive her. And then the girl is killed too. Unlike the “Big Bad Wolf,” however, the “Big Bad Bureaucracy” has an appealing alliterative effect that however does not take our mind away from its allusion to the big bad wolf of Aesop’s tales. Lastly, one would then wonder what the question mark at the end of the phrase is meant to achieve. If the big bad bureaucracy alludes to the big bad wolf, what then is the point of drawing back from the logical end of that allusion to say that the bureaucracy, especially in its incarnation in Nigeria, is fundamentally bad, through and through? It is the essential implications of that question mark that will form the basis of my arguments in this piece. True, the bureaucracy has earned a bad name, and that is not a statement that holds water only in Nigeria or even the third world. The bureaucracy is bureaucratic everywhere. It is the ultimate signal of inefficiency and red tape that are symptoms of decline of the bureaucratic managerial model. Two opinions bear this out. For Laurence Peters, “Bureaucracy defends the status quo long past the time when the status quo has lost its status.” On the other hand, Chris Fussell remarks that “In any bureaucracy, there’s a natural tendency to let the system become an excuse for inaction.” This second opinion reveals the very origin of the word “bureaucratic.” Bureaucracy originated from the French word bureau. This refers to the room, in the1300s, where the king’s administrators deposited their financial accounting documents, and placed them on a woolen cloth referred to as la bure. Over time, however, the bureaucracy became a highly complex coordination of government business that requires performing many specific tasks that are critical to the smooth functioning of governments everywhere, from the ancient pharaonic empire to the modern democracies. Bureaucracies have now become so indispensable that they have become the locus of governmental power. And this is where the emergence of the bureaucracy’s negative connotations commences. In other words, the bureaucracy has become so strong in its coordinating function that it has become inefficient and ineffective, and by that fact threatens the system it is meant to support. At its bureaucratic height, the bureaucracy is now no longer the backbone of an efficient government machinery delivering goods and services to the people; it is now a law unto itself. It has become essentially bureaucratic! This bad name of the bureaucracy achieves its worst effects in Africa. And Nigeria is one of its worse incarnations. One reason for this is that when the public service arrived Africa, it came without the full complements of those Weberian values—neutrality, efficiency, impartiality, integrity, accountability, transparency, etc.—that made it the core of an effective state system in the West. Second, the association of the bureaucracy with the statist system in Africa produced terrible consequences that allowed the leadership to centralize the political machinery in order to intervene in the economic life of the state. Furthermore, this bureaucratic statism immune the civil service from accountability and the capacity to efficiently respond to the citizens’ aspirations for a democratic and efficient service delivery. In Nigeria, what we can call the public service “bureau-pathology” ensures that the civil service is institutionally closed to innovation, and hence forfeits the open-mindedness required to effect meaningful changes through a dynamic relationship with the environment within which it operates. This inherent dysfunction of the traditional administrative framework predisposes officers only to be methodical and discipline, if at all. Since 1954 when the Nigerian civil service was inaugurated, there have been series of reform efforts targeted at every sector and dimension of the system to bring it to terms with the post-independence realities in Nigeria. Today, Nigerians have a very terrible perception of the public service, from the Power Holding Corporation of Nigeria (PHCN) to the Primary Healthcare Services. Water, education, road and security are all at an all-time level of inefficiency. One may then be tempted to conclude that the public service system in Nigeria is irredeemable or irreformable. This is a tempting conclusion that seems to have the force of administrative experience behind it. But, as a reformer and a public administration practitioner, I will be circumspect to go with this conclusion. And for good reasons too. True, the big bad bureaucracy has earned its terrible reputation as a grossly inefficient and lumbering institution that seeks to preserve its own status rather than transforming in response to challenges and circumstances. Yet, that is not the entire side of the story that can be narrated about the public service system in Nigeria. In 2005, Prof. Ladipo Adamolekun carried out a significant study of 29 public services in Africa. In that study, Nigeria, together with Cote d’Ivoire, Gabon, Zimbabwe, Guinea and Togo, was classified as a hesitant reformer. This label implies that in Nigeria, reforms were not as committed as it was in Benin, Burkina Faso, Ethiopia, Kenya, Mali, Uganda, etc. or delivering topnotch services like it is doing in the advanced reforming countries like Botswana, Namibia, South Africa and Mauritius. A hesitant reforming nation would be one that has not deployed the full weight of political will and administrative expertise to achieving the most efficient and optimal capacity readiness makes the public service a world class institution which complements democratic governance. Yet, a hesitant reforming nation is committed to reform in one way or the other. This is the present state of the Nigerian public service system. The reform of the public service system is a work in progress. That admission is, in itself, a concession to the possibility of a latent potential by the system to overcome its own inertia. To admit that the public service is a work in progress is to also imply that Nigeria is not a failed state. Successive governments since independence have put in place one sort of reform programme or the other to transform the public service into a functional structure that will translate the policies of government into governance dividends for the citizens. These efforts became accentuated from 1999 when the democratic dispensation commenced. From the Obasanjo through the Yar’Adua to the Jonathan administrations, the public service system has received tremendous amount of reform attention that keeps pushing the bounds of efficiency and effectiveness. One fundamental cumulation of all these attentions is the codification of reform insights and objectives into the National Strategy for Public Service Reform (NSPSR) iterated through update in current strategy documents of which the output of the Aigboje Aig-Imoukhuede-led African Initiative for Governance (AIG) technical support to the FGN is instructive. These documents are fundamental because they combine the weight of historical insights with the cogency of administrative foresight to project a future that will see the public service as a world class institution delivering democratic goods and services to Nigerians. This is indeed an admirable development. And this is the major crux of the whole matter. Usually, reform is often not about the ideas and insights. This is because there is a surfeit of reform ideas and global best practices with which all public services across the world are swamped. Reform ideas across the world provide any reforming nation with a comparative edge with which to adapt and adopt any reform to transform its public service. Reforms are also not often about the efforts invested in them. This is because efforts are not tantamount to reform successes. What matter most in administrative reforms are the measurable successes that emerge from successful implementation of the reform insights and ideas. When we reform, we are looking out for the end product—a fast moving, intelligent, professional, accountable, performance-focused, information-rich, flexible, adaptable and entrepreneurial public service that is capacity ready to boost the objectives of democratic governance in Nigeria. One of the beauties of the NSPSR is its calibration of six strategic imperatives to backstop its vision of achieving a world class public service institution; (b) getting the basics right; (c) comprehensiveness, prioritization and sequencing; (d) rapid building of implementation capacity; (e) coordination of implementation; and (f) stakeholders’ engagement. From a reformer’s perspective, the key issue here is getting the basics right. And the two basic issues that are critical to reform success are (a) strong and committed leadership, and (b) coordination of implementation. It has become an unassailable reform axiom that the most crucial factor that makes or mars a reform is the political will to see the reform through its often messy execution process. This requires a firm commitment from both the political and bureaucratic leadership. This is a serious matter that has its foundation in the politics-administration dichotomy. Politicians and administrators do not often see eye to eye on policy matters even though their responsibilities are clear cut. But, as the Awolowo-Adebo synergy demonstrated, politicians and administrators can agree on what needed to be done, and actually get it done. The Old Western region is a testament to this cooperation.

https://thenationonlineng.net/big-

en

A cross section of Nigerian University graduates By Dayo Adesulu With approximately 11 million people between the ages of 15 and 34 out of work in Nigeria, it is becoming more important than ever to tackle the country’s youth unemployment challenge with practical and effective solutions. Without a doubt, higher education plays a key role in reversing unemployment trends in Nigeria, and in helping young people to establish meaningful careers. The Nigerian Government and other education stakeholders across the country have recognised this, opening over 70 new universities since 2005. However, as the international experience demonstrates, higher education in itself is no panacea to curbing youth unemployment. Whilst creating additional university places is essential, what also needs to be considered is the quality and relevance of the tertiary education students are receiving. Frank Edwards, Education Expert and Workforce Development Director at Pearson, believes that giving students an education that sets them up for success in work and life is what will have the greatest impact on improving Nigeria’s unemployment statistics. Mr. Edwards continues that in spending a lot of time assessing how to better equip learners in all parts of the world for success in the workplace, “Indeed, the mismatch between education and employment is a global challenge, as employers the world over complain that despite high youth unemployment rates, finding school leavers and graduates with the skills demanded by modern workplaces is increasingly difficult. Nigeria, like many other countries, has an oversupply of tertiary graduates that fail to possess the 21st Century skills and competencies employers so often require – teamwork, innovation, communication skills and initiative, to name just a few”. Whilst graduates may be gaining essential theoretical knowledge, they too often lack the skills to apply this knowledge in a way that is useful to those who employ them. Providing graduates of all disciplines with 21st Century skills therefore needs to become a priority for policy makers and educators alike. Embedding these skills in curricula will help create a workforce that has the attributes necessary to meet the demands of a global and increasingly connected labour market. Employees who have learnt how to learn, how to adapt to new and challenging situations, and how to direct their knowledge in practical ways, will be those that flourish in a future workforce. Teaching educators how to give their learners these skills should therefore be pivotal to Nigeria’s efforts to reform its higher education system. The economic and social cost of youth unemployment is high, not only to individuals but to the communities in which they live. Nigeria as a country has so much potential, but fulfilling this potential will depend on harnessing the country’s human capital. Providing talented young Nigerians with access to quality tertiary education is of course fundamental to achieving this goal. With many of the country’s top students choosing to study abroad (30,000 Nigerians are currently enrolled in universities in the United Kingdom alone) we need to provide young people with access to education that not only provides superior academic learning, but also prepares them for the workplace. A solution to Nigeria’s youth unemployment challenge must therefore prioritise 21st Century skills uptake in the country’s universities. Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

http://www.vanguardngr.com/2015/12/graduates-need-21st-century-skills-to-be-

en

There is a common fear that robots, with the gradual advancement in Artificial Intelligence (AI), are coming for human jobs. Elon Musk, the CEO of SpaceX and Tesla was reported to have said that technology will take so much jobs from people that many will have to rely on a universal basic income to survive, CNBC reports. Jack Ma, the owner of Alibaba also said that the technology of automation will make the next few decades very painful whose survival rely on manual way of working. READ ALSO: We never expelled Akpabio - PDP opens up 39 minutes ago To be ready for the great change, professional and wealthy businessmen have come up with a list of courses to study to have a high chance of nailing that big and well-paying job in the future. Here is therefore the list: 1. Data analytics Ma said that AI will outperform human knowledge in the next 30 years as many jobs will be taken away. “The new wave is coming. Jobs will be taken away. Some people, who catch up [with] the wave, will be rich, will be more successful,” he said. 2. Science, engineering and economics Bill Gates, Microsoft co-founder said that someone who has a background in those three fields of study will be very successful irrespective of the change that will come with advancement in technology. He said those with the knowledge in those areas will be the agents of change. Mary Barra, the CEO of General Motors said that coding is a “core skill” that will increasingly become important in the future, adding that coding is very necessary in every industry. 4. Liberal arts Mark Cuba, the multi-companies investor who made his money investing in tech companies, said the liberal arts is the way. He said he would study philosophy as his major over accounting if he were to start college all over again. READ ALSO: NAIJ.com upgrades to Legit.ng: a letter from our Editor-in-Chief Bayo Olupohunda Cuba based on judgment on the simple logic that AI will only be able to replace jobs that require technical skill but not those that heavily rely on personal judgement. Meanwhile, Legit.ng earlier reported that the United States has the most billionaires in the world with 420 more people than China. In total, there are 705 billionaires in the US, 285 in China, 146 in Germany, 102 in Russia, and 97 in the UK. NAIJ.com (naija.ng) -> Legit.ng. We have upgraded to serve you better Meet hardworking mother and wife who works as a glass-technician in Abuja | Legit TV Joseph Omotayo (HOD Human-Interest) Joseph Omotayo has been writing for the human interest desk since 2019 and is currently the head of the desk. He graduated from Obafemi Awolowo University, Ile-Ife, with a degree in Literature in English in 2016. He once worked for Afridiaspora, OlisaTV & CLR. He is a 2022/2023 Kwame Karikari Fact-Checking fellow. He can be reached via: [email protected].

https://www.legit.ng/1239382-bill-gates-jack-ma-2-advise-students-study-high-paying-jobs.html?utm_source=onesignal&utm

en

The first human trial to evaluate a candidate vaccine against coronavirus disease 2019 has begun in Seattle, US health officials said Monday. “The open-label trial will enroll 45 healthy adult volunteers ages 18 to 55 years over approximately 6 weeks,” the US National Institutes of Health (NIH) said in a statement. “The first participant received the investigational vaccine today.” But the candidate would still need to progress through various more stages, known as phases, to prove it works and is safe. US officials have estimated it may take another year to 18 months before it becomes available — if everything goes to plan. The vaccine is called mRNA-1273 and was developed by NIH scientists and collaborators at biotechnology company Moderna, which is based in Cambridge, Massachusetts. Funding was also provided by the Oslo-based Coalition for Epidemic Preparedness Innovations (CEPI). “Finding a safe and effective vaccine to prevent infection with SARS-CoV-2 is an urgent public health priority,” said Anthony Fauci, head of infectious diseases at the NIH. “This Phase 1 study, launched in record speed, is an important first step toward achieving that goal.” Coronaviruses are spherical and have spikes protruding from their surface, giving them a crown-like appearance. The spike binds to human cells, allowing the virus to gain entry. The Moderna candidate vaccine carries the genetic information of this spike in a substance called “messenger RNA.” Injecting human tissue with the spike’s messenger RNA makes it grow inside the body, thereby eliciting an immune response without having actually infected a person with the full-blown virus.

https://www.channelstv.com/2020/03/16/us-begins-first-human-trial-of-

en

No, the mere fact that copies of the book of Enoch were found among the “Dead Sea Scrolls” is not a reason to consider the book to be Scripture. The Dead Sea Scrolls contain all kinds of documents, not just Scripture. We don’t have to consider every calendar, commentary, songbook, community regulation, or historical document unearthed at Qumran to be part of the Bible. Even the ancient Jews living there didn’t consider every document there to be Scripture. Their library was much more than just biblical manuscripts. Some Quick Definitions While the answer to this question is rather simple and requires only some basic logic or common sense, it can be helpful to know a few related terms: - Pseudepigrapha – While this word can generally refer to any document whose author falsely claims to be someone else, it applies most specifically to a genre of Jewish and “Christian” apocryphal writings from the ancient Greco-Roman era which falsely claim to be written by well-known biblical figures like Moses, Solomon, Ezra, or (as you might guess here) Enoch. This became a common literary genre among sectarian Jews and heretical offshoots of Christianity (most notably the Gnostics). - Book of Enoch – Also known as “1 Enoch” to distinguish it from other Pseudepigraphal books which also falsely claim Enoch as their author, most of the popularly known “Book of Enoch” was likely written sometime during the last few centuries B.C., though the portion known as the “Book of Parables” (chapters 37-71) may have been added later sometime in the 1st century A.D. Numerous fragments of the book were found among the Dead Sea Scrolls (though none from the “Book of Parables,” which is largely why this portion is thought to be a later addition.) Other fragments have been found elsewhere from ancient Greek and Latin translations, but the only complete copies that exist are from the later Ethiopic translation. The book is unknown to history prior to the Hellenistic era and shows many internal signs of being written during that time period, making the document far too late to have anything to do with the historical Enoch. The book is a good example of the literature known as Pseudepigrapha. - Dead Sea Scrolls – The Dead Sea Scrolls are a large collection of various documents which were found stored in jars in caves around the archeological site known as Qumran. The scrolls are most famous for the very ancient Old Testament manuscripts found among them, but the Scrolls also included a variety of other documents such as calendars and administrative documents or “community rules,” as well as songbooks, commentaries, and other literature. The majority of the scrolls are in Hebrew and Aramaic, though some Greek documents were also found. - Qumran – An archeological site near the northwestern shore of the Dead Sea which appears to have been home to a Jewish sect. The vast majority of scholars believe the residents were part of a group known as the Essenes. The site is most famous for its association with the Dead Sea Scrolls. The group living at Qumran seems to have been highly sectarian and firmly at odds with mainstream Jewish religious groups of the day. Did the Qumran Community Consider Enoch to be Scripture? It is often claimed that the Qumran Community that collected or produced the Dead Sea Scrolls must have considered the Book of Enoch to be authoritative Scripture, but the truth is that we don’t know what they believed about the book. None of the Dead Sea Scrolls comment on the matter at all. Indeed, leading Dead Sea Scrolls scholars fully admit the “speculative nature” of the claim that the Jews at Qumran believed the Book of Enoch to be authentic Scripture.1 Even scholars who defend the claim that Enoch was considered Scripture nevertheless must concede that “Qumran Literature does not seem to name the work that we know as 1 Enoch as an inspired or revealed source.”2 We know that the Qumran community owned several copies of the book and we know that they believed certain things which the author of 1 Enoch also believed, but this is hardly proof that they thought it was inspired. I own several copies of John Bunyan’s “Pilgrim’s Progress” and believe many of the things laid out in that book, but future historians would be wrong to conclude that I thought Bunyan’s books should be part of the Bible! We don’t have any solid evidence that the Jews at Qumran thought of the Book of Enoch as Scripture. And if they did? Further, even if the sectarians at Qumran did consider Enoch to be Scripture (which, again, is not necessarily the case), that wouldn’t prove anything at all. The fact that Muslims consider the Quran to be Scripture does not make it Scripture. The fact that Mormons consider the “Book of Abraham” to be Scripture does not make it Scripture. Finding a religious group somewhere, even an ancient one, that considers a book to be Scripture does not make the book Scripture. Even if the sectarian Jews living at Qumran did think that Enoch was Scripture, even if we could prove they thought so with 100% certainty, that would not be evidence that Enoch really is Scripture. Various sects and cults that use the Bible and claim to be the “true” Jews or the “true” Christians are always falsely elevating man-made books to the level of Scripture. Why should Qumran have been any different? No, the mere fact that there were copies of the Book of Enoch at Qumran has nothing to do with whether or not God inspired the book.

https://carm.org/bible-difficulties/is-the-book-of-enoch-

en

5 Essential Techniques Every Textile Artist Should Master In the exciting world of textile art, being good at certain techniques can benefit an artist's work and artistic expression. Artists who work with thread, color, and pattern can create magic with it and create something useful and beautiful. To be good at this art form, you need to learn many different skills, from old-fashioned skills to new technology-based skills. This piece breaks down the complex and beautiful art forms of weaving, dyeing, embroidery, printing, and quilting into five essential techniques that every textile artist should know. These basic skills not only make the artist more flexible but also open the door to endless imagination and new ideas in the world of textiles. Weaving, or joining warp and weft threads, is an important part of making textiles. It is more than just making fabrics; it is an art form that brings intricate designs and textures to life. Every textile artist must be proficient at weaving to fully understand how fabrics come together and how threads interact. Important things you need to know about knitting: Learn more about looms: Learn about the different types of looms, from simple frame looms to more complex jacquard looms. Pattern Making: Understand the geometry of thread weaving to learn how to create different patterns such as plain, twill, and herringbone. Texture exploration: Experiment with different threads and sewing methods to create a unique feel and look of the fabric. Technical Proficiency: Develop your technical skills by learning how to solve common sewing problems and how a loom works. 2. Dyeing and color science Staining is more than just adding color; it is an in-depth study of hue, intensity, and value, and has a lot to do with color theory. Textile artists use dye to give their work color and depth. There are many ways to dye, from simple dip dyeing to more complex tie-dye and tie-dye. Important things to know about color theory and dyeing: Understand color interactions: To predict and control coloration results, you need an understanding of color theory. Technique Variety: Learn different dyeing methods, such as batik, free dye, and ombre, to make your work more interesting. Fabric Chemistry: Learn how different fibers react with dyes to change color and how long this lasts. Environmentally Friendly Practices: Dye your fabrics sustainably to minimize your impact on the environment. The art of embroidery uses needle and thread to decorate fabric, meaning there are many different ways to decorate textile pieces. Each piece can be given more texture, color, and story through embroidery, which can range from simple stitches to complex multi-thread methods. Things you need to know about embroidery are: Stitch Types: To give your pieces more depth and detail, you'll learn many different stitches, from simple running stitches to more complex layered knots. Design Translation: Learn how to transfer designs from paper to fabric while keeping the dimensions and proportions the same. Material Knowledge: Understand how different threads and fabrics work together and how they influence the approach and execution of a design. Precision and patience: Strive to maintain the patience and precision required for detailed embroidery, which often requires close attention to small details. Printing on fabric allows you to print designs, patterns, and colors directly onto the fabric itself. People like to use digital textile printing, screen printing, block printing, and other methods. To get good at this, you need to know how to print on different materials, how to design, and how fabric, ink, and print work together. Important things to know about printing: Printing Technology: Learn different printing methods such as digital printing, hand block printing, and screen printing. Create design: Learn how to create printable images, taking into account factors such as color separations and repeating patterns. Ink and Fabric Interaction: Learn how different types of ink or dye react with different types of fabric, and how heat and pressure change prints. Consistency and Repeatability: Learn how to produce the same print from run to run and learn the details of alignment and registration. 5. Sculpture Textile technology Textile artists often use sculptural methods to explore the three-dimensional possibilities of textiles. To do this, the fabric may need to be pleated, folded, or layered, and material such as thread or starch may need to be added to maintain its shape. Mastering the sculptural textile method means being able to blur the boundaries between textiles and sculpture, which requires creativity and new ideas. Some important things to know about sculptural textile techniques are: Handling fabrics: To create three-dimensional shapes, learn pleats, pleats, and pleats. Structural Integration: Learn how to use wire, starch or interface materials, and other support materials to maintain shape. Concept development: learn to think about and create three-dimensional pieces of fabric. Experimental approach: breaking the boundaries of traditional textile art and encouraging people to try new materials and methods. For textile artists who want to expand their creativity and improve their skills, it is important to learn these five basic techniques. Artists have a wide range of skills that they can use to express their ideas, such as weaving, dyeing, embroidery, printing, and quilting. Learning more about these techniques allows artists to use textures, colors, and designs in new ways, pushing the boundaries of textile art. In the fabric industry, these basic skills not only keep traditional crafts alive but also allow new ideas and art to grow. 1. What basic skills should a new textile artist focus on? First, someone new to sewing should learn about the different types of fabrics, the basics of knitting and sewing, and color theory. 2. How do textile artists combine these methods in their work? Artists can combine these styles by layering different techniques, such as dyeing the fabric before embroidering or adding quilted areas to a woven piece. 3. Are these methods applicable to both old and new textile arts? If you want to use these techniques in both traditional and modern ways, you can adapt them to suit your needs. 4. What is the best way to learn and become proficient at these sewing skills? The best way to learn and improve these skills is to practice, take classes, and seek help from more experienced artists. There are also online courses and tutorials available to support learning by doing. 5. How important is it to try different things to get good at these techniques? Experimentation is important for artists because it helps them find new styles, understand how materials work, and come up with new ways to complete their craft.

http://cut-urls.com/l2JJQL

en

June 9, 2019 by The Nation How the phrase ‘my dear’ can put you in trouble On several occasions, I have heard phrases like “English no be money, grammar no be success, grammar no be money”. Yes! I totally I agree, one hundred per cent. So, putting things in view, why do we now go out of our ways to make English language our own? We have our own Pidgin English which has spread across the country. Thanks to Warri indigenes. I can even say it has now become almost a global (sic) language. It is safer to speak it than scatter the regular English language. Recently, a huge fight broke out in my neighborhood, resulting to an arrest that led a jail term of one of our neighbours. The fight was so massive that others who knew nothing about it even joined. Some took sides, it was just crazy. Frantically, there was bloodshed, it really went out of hand. The guy in question was put behind bars, not because he physically assaulted his neighbor. No, not even because he raised a finger at her. His crime was that his neighbour’s wife greeted him and responded by saying “oh hello my dear!” That was it. The woman, at first corrected him by asking him to withdraw the statement and respond appropriately to her. Sighting the instance that she greeted him respectful and as a married woman, she deserved to be accorded with the same respect. The man, thinking it was a trivial issue brushed her outburst aside. She thereafter held unto his shirt, insisting that he must withdraw the response to her greeting because she was not “his dear”. The raising of their voices drew the attention of other neighbours and passersby. Not long after, the husband who was a retired police officer insisted that the man must be arrested for addressing his wife inappropriately. Ha! “My dear.” What could be wrong with these two words? They sound harmless, but critically analysing it, one could begin to see that it could sometimes sound condescending. In my part of the country, we address one with “my dear” when the person is younger or of lower economic status. For instance, your younger sibling, or your junior colleague. I don’t recall us using it for a contemporary or even a friend. We should perhaps learn to draw the line on how we address people. I know of a particular part of the country where my “my dear” is used on all individuals. I gave a friend a ride and could recall her talking on the phone with a cleric and as she was ending the call , I heard her address him as ‘my dear’. To some, it might be just nothing but it could be sensitive to other people’s disposition and ideologies. Be respectful. What’s wrong with, Good morning sir, and the man responds, good morning madam. Good morning Mama Buky. I have heard younger people say to their elders , how are you ma, how are you sir. This is very civil if you ask me. Civil and respectful. We need to understand that we are not whites. We should not be ‘ over sabi’. Respect begets respect. If only my neighbour was civil enough to say ” how are you madam”? Or better still, good morning madam, he would be in his house today… Lol “My dear” maybe nothing to you but some people think otherwise. It is no skin off your nose if we exchange pleasantries in an African way. You never know, it could get you out of trouble.

https://thenationonlineng.net/how-the-phrase-my-dear-can-put-

en

*File Photo: Flood victims Nigeria on Thursday warned tens of thousands of people living along one of its main rivers to expect massive flooding as neighbouring Cameroon announced plans to release water from a dam. The National Emergency Management Agency (NEMA) said it had been informed that the Lagdo dam in northern Cameroon would be emptying water into the River Benue until November to relieve an excessive build-up. The opening of the dam as well as heavy rain in 2012 led to huge flooding along the river, the main waterway in eastern and central Nigeria. Authorities in northeastern Adamawa state said at least 30 people had been killed and 120,000 displaced, while more than a dozen Cameroonians were reported to have died. NEMA warned populations along the river to be on alert and “ready for evacuation” in case of a possible repeat. It urged local authorities and emergency agencies along the 1,400-kilometre (870-mile) river, the main tributary of the River Niger, to prepare safe locations to move affected communities. Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

http://www.vanguardngr.com/2015/08/nigeria-on-alert-for-

en

Other forms: sacrifices; sacrificed; sacrificing A sacrifice is a loss or something you give up, usually for the sake of a better cause. Parents sacrifice time and sleep to take care of their children, while kids might sacrifice TV time to hang out with mom and dad. Though no longer used only in a religious context, sacrifice comes from the Latin sacra and facere, meaning "to perform sacred rites." If you've studied ancient cultures like the Incas, you've probably heard of "human sacrifice," where a person is killed in a sacred ceremony to please the gods. But thankfully those kinds of sacrifices don't happen anymore.

http://www.vocabulary.com/dictionary/sacrifice

en

- King Charles III of England is being crowned at Westminster Abbey today, following his pronouncement shortly after the late Queen Elizabeth II - World leaders have gathered in the United Kingdom to bid farewell to Queen Elizabeth II at Westminster Abbey on Monday, September 19 - The Queen reigned for 7 decades before she passed away on Thursday, September 8, at the age of 96, becoming the longest-reigning monarch in the British history - However, the late Queen left some mouth-opening properties for her successor, King Charles III, to inherit, some of which included Queen Victoria's wedding gown PAY ATTENTION: Сheck out news that is picked exactly for YOU ➡️ click on “Recommended for you” and enjoy! The coronation and crowning of King Charles III has commenced today, May 6, months after he was announced as successor of the Late Queen Elizabeth II. The United Kingdom's longest reigning monarch, Queen Elizabeth II, passed away on Thursday, 8, 2022. She was popularly called zest for life. As one of the country's wealthiest women, she inherited palaces, crown jewels and estates, BBC Pidgin reported. The 96-year-old Queen also owned some unique and unexpected things. All of them became the new properties of King Charles. PAY ATTENTION: Share your outstanding story with our editors! Please reach us through [email protected]! King Charles III also inherited family properties The new king inherited the family inheritance that the Queen inherited. This included Queen Victoria's wedding gown. According to Sir Norman Hartnell in an interview with New York Times in 1953 cited by the BBC Pidgin, the Queen and the Queen's mother are not ready to be fashion setters, noting that such is for people who have less important work to do. Lady Storms King Charles’ Coronation adorned In Yoruba attire, causes stir: "Nigeria well represented" On other properties, such as Dolphins and Swans, by law in the UK, all white mute swans without ownership marks in England and Wales belong to the monarch. Queen Elizabeth II's Dresses Over the years, the Queen had developed her own wardrobe style that had become a benchmark for many female leaders across the world. The late Queen wore two-inch (five-centimeter) heels and skirts that hemline below the knee weighed down for a dignified wardrobe. Her hats are small-brimmed and tall. The Queen was always seen with a headscarf, hat, or tiara unless she is indoors. It is not yet sure what would happen to her dresses, but dresses of former Queens Victoria, Diana, and Princess of Wales are in museums. Queen Elizabeth II's Handbags Her handbags are made by the British brand Launer, and BBC report said that she has about 200. All have elongated straps that allow her to have necessary handshakes. The head of Launer, Gerald Bodme, described the Queen as a "wonderful lady with huge charisma." She said on many occasions that she had met with her, the Queen would never feel fully dressed without her handbags. Crown's Swans and Dolphins Swan upping existed as far back as the 12th century when the crown claimed ownership of unmarked mute swans for open water to ensure a ready supply for feasts. By law, dolphins find within 3 miles of the coast also belong to the monarch, the ownership is dated back to 1324, during the reign of Edward II. The law stated, "Also, the King shall get whales and surgeons taken in the sea or elsewhere within the realm." The status still remains valid today, and whales and dolphins are recognized as "Fishes Royal." Some news reports said the Queen loves dogs, owing about 30 corgis in her lifetime, but there is another animal that steals her heart: horses. The Queen learned to ride on a Shetland pony called Peggy, the one presented to her on her 4th birthday from her grandfather, King George V. She later inherited the Royal Stud, one racehorse breeding center in Sandringham that later produce many of her winners. The Queen often used horse-drawn carriages or her custom-made Bentley car for official engagements. However, she was often seen driving Land Rovers. According to the British press, as cited by BBC Pidgin, Queen Elizabeth II's car collection was worth more than $10 million, and she owned more than 30 Land Rovers during her lifetime. Royal Family's Land Holding The Sunday Times Rich List 2022 estimated the Queen's personal wealth to be £370 million ($426 million). Much of these come from property, jewels, stamps, and artworks. The monarch holds many royal residences and vast tracks of public land, which included London Regent Street and Berkshire Ascot horse racecourse. The Crown Estates owned the seabed out of 12 nautical miles from the British shore. This means that many companies that build offshore wind farms must pay the monarch royalties. Jewels, including diamonds and precious stones. Glittering gold and diamonds have always been associated with the Royal Family, but the British colonial empire, being the biggest in the history of mankind, enabled the Royal Family to take possession of some of the finest diamonds and precious stones. There are controversies about how many of these jewels made their way into the hands of the British crown, and there have been calls to return the Crown Jewels to their countries of origin, such as the Star of Africa and Koh-i-Noor diamonds. However, there are other collections owned by the Queen, separate from the Crown Jewels, and most of this jewelry will be passed on to King Charles III. 2 Important functions outlined as Osinbajo travels to UK before Queen Elizabeth II's Funeral Day Legit.ng earlier reported that vice president Yemi Osinbajo has jetted out of the country to represent Nigeria at the state funeral of the late Queen Elizabeth II in London King Charles III and Queen Consort Camilla will receive Osinbajo, among other world leaders, at a reception in Buckingham Palace on Sunday Earlier in the day, Osinbajo is expected to meet with the UK foreign secretary, James Cleverly, for a bilateral meeting Bada Yusuf (Politics and Current Affairs Editor) Yusuf Amoo Bada is an accomplished politics and current affairs editor, boasting over 7 years of experience in journalism and writing. He is a graduate of OAU, and holds Diploma in Mass Comm. and BA in Literature in English. He has obtained certificates in Leadership and received the "Certificate for Breakthrough of the Year 2022" in recognition of his great performance during his first year at Legit.ng. Worked as Editor with OperaNews. Contact: [email protected] or call 08161717844

https://www.legit.ng/world/europe/1492980-queen-elizabeth-iis-list-

en

July 2, 2019 by The Nation It will soon be impossible to kill Cockroaches with chemicals – Researchers Cockroaches are evolving to resist chemical cocktails used by exterminators and they’re doing it faster than scientists previously thought, according to a new study. Purdue University scientists found evidence that cockroaches are developing “cross-resistance” to insecticides, according to the study published in Scientific Reports last month. Essentially, this means the bugs will be extremely difficult to exterminate, researchers said. “This is a previously unrealized challenge in cockroaches,” said Michael Scharf with the Department of Entomology at Purdue University, who published the study. “Cockroaches developing resistance to multiple classes of insecticides at once will make controlling these pests almost impossible with chemicals alone.” The scientists studied cockroaches in apartment buildings in Indiana and Illinois for six months, rotating various treatments of insecticides, according to a news release. That’s similar to the way exterminators mix up concoctions with different types of chemicals because cockroaches are often already immune to one type of poison. The idea is that even if a cockroach can resist one type of insecticide in the mixture, another type will kill it. Lab tests of the cockroaches found that cross-resistance likely played a significant role in cockroaches that survived treatments, the release states. A few surviving cockroaches resistant to the insecticide passed along the immunity to offspring. They also gained resistance to other types of insecticide, too, even types that they hadn’t yet been exposed to, researchers said. “We would see resistance increase four- or six-fold in just one generation,” Scharf said in the news release. “We didn’t have a clue that something like that could happen this fast.” So, even if an exterminator kills a vast majority of cockroaches, the ones that survive can gain cross-resistance, scientists say. And because female cockroaches have 50 offspring in three months, a population mostly knocked down by a treatment could once again boom within months, researchers said. That’s why the scientists said it’s important to include other treatments such as traps, improved sanitation and vacuums that can remove cockroaches. “Some of these methods are more expensive than using only insecticides, but if those insecticides aren’t going to control or eliminate a population, you’re just throwing money away,” Scharf said in the news release.

https://thenationonlineng.net/it-will-soon-be-impossible-to-kill-cockroaches-

en

Everything You Need to Know about Canada Immigration Canada offers a diverse range of immigration pathways for individuals seeking to relocate to the country. Here’s everything you need to know about immigration to Canada: - Immigration Programs: Canada offers various immigration programs tailored to different categories of immigrants, including skilled workers, entrepreneurs, investors, family members of Canadian citizens or permanent residents, refugees, and international students. - Express Entry System: The Express Entry system is a popular immigration pathway for skilled workers. It manages applications for three federal economic immigration programs: the Federal Skilled Worker Program, the Federal Skilled Trades Program, and the Canadian Experience Class. - Provincial Nominee Programs (PNPs): Canada’s provinces and territories operate their own immigration programs, known as Provincial Nominee Programs (PNPs). These programs allow provinces to nominate individuals who meet specific criteria and have the skills and experience needed to contribute to the local economy. - Family Sponsorship: Canadian citizens and permanent residents can sponsor their family members for immigration to Canada. This includes spouses, partners, dependent children, parents, and grandparents. - International Students: Canada is a popular destination for international students seeking quality education and opportunities for post-graduation work and immigration. The Post-Graduation Work Permit Program (PGWPP) allows international graduates to work in Canada after completing their studies. - Refugee and Humanitarian Resettlement: Canada has a strong commitment to refugee resettlement and humanitarian immigration. The Refugee and Humanitarian Resettlement Program provides protection and assistance to refugees and individuals in need of humanitarian aid. - Temporary Residence: In addition to permanent immigration programs, Canada also offers various temporary residence options, including work permits, study permits, and visitor visas. Temporary residents can come to Canada for specific purposes, such as work, study, or tourism. - Language Requirements: Proficiency in English or French is often required for immigration to Canada. Language tests such as the IELTS (International English Language Testing System) or CELPIP (Canadian English Language Proficiency Index Program) are commonly used to assess language proficiency. - Education and Credential Assessment: Individuals with foreign education and credentials may need to undergo an educational credential assessment (ECA) to determine the equivalency of their qualifications in Canada. This assessment helps immigration authorities and employers understand the value of foreign credentials. - Settlement Services: Upon arrival in Canada, immigrants and refugees can access settlement services to help them integrate into Canadian society. These services may include language training, employment assistance, housing support, and cultural orientation. Navigating the immigration process in Canada can be complex, but with the right information and guidance, individuals can pursue their immigration goals and build a new life in this diverse and welcoming country. Why Consider Canada Immigration? There are several compelling reasons to consider immigration to Canada: - Strong Economy: Canada boasts a stable and prosperous economy with diverse industries, including technology, finance, healthcare, natural resources, and manufacturing. The country offers abundant job opportunities and competitive salaries for skilled workers. - Quality of Life: Canada consistently ranks high in global quality of life indexes, thanks to factors such as universal healthcare, high standards of education, clean environment, low crime rates, and multicultural society. Canadians enjoy a high standard of living and access to a wide range of social services and amenities. - Inclusive Society: Canada is renowned for its inclusive and multicultural society, where people from diverse backgrounds are welcomed and respected. Immigrants contribute to the country’s cultural richness and social fabric, fostering a sense of community and belonging. - Safe and Peaceful Environment: Canada is known for its safety and political stability. The country offers a peaceful environment with strong democratic institutions, rule of law, and respect for human rights, making it an attractive destination for families and individuals seeking security and stability. - Immigration Opportunities: Canada offers a variety of immigration pathways for skilled workers, entrepreneurs, investors, students, and family members. The Express Entry system, Provincial Nominee Programs (PNPs), and family sponsorship programs provide avenues for individuals to obtain permanent residency and citizenship. - Educational Opportunities: Canada is home to world-class educational institutions renowned for their quality of education and research. International students can pursue undergraduate, graduate, and postgraduate degrees in diverse fields, gaining valuable skills and qualifications for their future careers. - Healthcare System: Canada’s publicly funded healthcare system provides residents with access to essential medical services, including doctor visits, hospital care, and prescription drugs. The healthcare system is based on the principles of universality, accessibility, and affordability. - Natural Beauty: Canada is blessed with stunning natural landscapes, including mountains, forests, lakes, and coastlines. Outdoor enthusiasts can enjoy a wide range of recreational activities, such as hiking, skiing, camping, fishing, and wildlife watching, in pristine natural settings. Overall, Canada offers a welcoming and prosperous environment for individuals and families seeking opportunities for personal and professional growth, cultural enrichment, and a high quality of life. Immigrating to Canada: The Opportunities Immigrating to Canada presents a multitude of opportunities for individuals and families seeking a better future. Here are some of the key opportunities that Canada offers: - Economic Opportunities: Canada’s strong and diversified economy provides numerous job opportunities across various sectors, including technology, healthcare, finance, engineering, and skilled trades. The country’s low unemployment rate and high demand for skilled workers make it an attractive destination for job seekers. - High-Quality Education: Canada is home to world-class educational institutions, including universities, colleges, and research centers. International students can access quality education and gain valuable skills and qualifications that are recognized globally. - Universal Healthcare: Canada’s publicly funded healthcare system ensures that residents have access to essential medical services without financial barriers. Immigrants and their families can benefit from comprehensive healthcare coverage, including doctor visits, hospital care, and prescription drugs. - Social Benefits and Services: Canada offers a wide range of social benefits and services to support individuals and families, including child benefits, unemployment insurance, disability benefits, and retirement pensions. These programs help ensure social inclusion and well-being for all residents. - Safe and Inclusive Society: Canada is known for its safety, political stability, and inclusive society. The country values diversity and multiculturalism, creating a welcoming environment for immigrants from around the world. Canadians pride themselves on tolerance, respect, and equality. - Pathways to Permanent Residency: Canada offers various immigration pathways for individuals and families to obtain permanent residency, including the Express Entry system, Provincial Nominee Programs (PNPs), family sponsorship programs, and refugee resettlement programs. Permanent residents enjoy many of the same rights and privileges as Canadian citizens, including access to healthcare, education, and social benefits. - Cultural Enrichment: Canada’s rich cultural diversity provides opportunities for immigrants to connect with people from different backgrounds and traditions. Immigrants contribute to Canada’s cultural mosaic, adding vibrancy and dynamism to communities across the country. - Natural Beauty and Outdoor Recreation: Canada’s breathtaking natural landscapes, including mountains, forests, lakes, and coastlines, offer endless opportunities for outdoor recreation and adventure. Immigrants can explore and enjoy Canada’s natural beauty through activities such as hiking, skiing, camping, fishing, and wildlife watching. Overall, immigrating to Canada opens doors to a world of opportunities for individuals and families seeking a better quality of life, economic prosperity, social inclusion, and personal fulfillment. Canada’s welcoming and inclusive society embraces diversity and offers a supportive environment for newcomers to thrive and succeed. Working in Canada: Prosperity and Opportunities Working in Canada offers a wealth of prosperity and opportunities for individuals seeking to build a successful career and enjoy a high quality of life. Here are some of the key benefits and opportunities that Canada provides: - Robust Economy: Canada boasts a strong and stable economy with diverse industries, including technology, finance, healthcare, natural resources, manufacturing, and more. The country’s economic resilience and growth create numerous job opportunities across various sectors, offering stability and prosperity for workers. - High Salaries and Benefits: Canadian workers enjoy competitive salaries and comprehensive benefits packages, including healthcare coverage, retirement plans, paid vacation days, and more. The country’s commitment to fair wages and labor rights ensures that workers are fairly compensated for their contributions. - Skilled Worker Shortages: Canada faces shortages of skilled workers in various industries, particularly in sectors such as healthcare, information technology, skilled trades, and engineering. As a result, skilled workers with in-demand qualifications and experience are highly sought after and can command lucrative salaries and benefits. - Career Advancement Opportunities: Canada offers ample opportunities for career advancement and professional development. Workers can pursue further education, training, and certifications to enhance their skills and qualifications, opening doors to higher-paying and more rewarding positions. - Work-Life Balance: Canada values work-life balance and prioritizes the well-being of its workers. Many employers offer flexible work arrangements, including telecommuting, flexible hours, and parental leave, allowing workers to balance their professional and personal lives effectively. - Safe and Inclusive Workplace: Canadian workplaces are known for their safety, inclusivity, and respect for diversity. Employers are required to provide a safe and harassment-free work environment, fostering a culture of equality, respect, and collaboration among employees. - Immigration Pathways: Canada offers various immigration pathways for skilled workers, entrepreneurs, investors, and international students to obtain work permits and permanent residency. The Express Entry system, Provincial Nominee Programs (PNPs), and other immigration streams provide avenues for talented individuals to immigrate to Canada and contribute to its economy and society. - Quality of Life: Working in Canada offers access to a high quality of life, with excellent healthcare, education, housing, and social services. The country’s natural beauty, cultural diversity, and recreational opportunities provide a rich and fulfilling lifestyle for workers and their families. Generally, working in Canada provides a pathway to prosperity, career growth, and personal fulfillment for individuals seeking to build a brighter future for themselves and their loved ones. With its thriving economy, inclusive society, and abundance of opportunities, Canada remains a top destination for talented professionals from around the world. Living in Canada: Quality of Life Living in Canada offers a high quality of life across various aspects, making it an attractive destination for individuals and families seeking comfort, safety, and well-being. Here are some key factors contributing to the quality of life in Canada: - Healthcare: Canada’s publicly funded healthcare system ensures that residents have access to essential medical services without financial barriers. Universal healthcare coverage provides peace of mind and promotes overall well-being for individuals and families. - Education: Canada is home to world-class educational institutions, offering quality education at all levels, from elementary schools to universities. Accessible and affordable education opportunities contribute to the intellectual development and success of students. - Safety: Canada is known for its safety and political stability, with low crime rates and strong rule of law. Residents enjoy a secure environment, allowing them to live with peace of mind and focus on their personal and professional pursuits. - Diverse Culture: Canada is celebrated for its multiculturalism and diversity, with people from various cultural backgrounds living harmoniously together. This cultural richness enhances social experiences and fosters a sense of inclusivity and belonging for all residents. - Natural Beauty: Canada’s vast and diverse landscapes offer breathtaking natural beauty, including mountains, forests, lakes, and coastlines. Residents have ample opportunities for outdoor recreation and adventure, promoting physical health and well-being. - Clean Environment: Canada prioritizes environmental conservation and sustainability, resulting in clean air, water, and natural surroundings. Environmental initiatives and regulations contribute to a healthy and sustainable environment for present and future generations. - Employment Opportunities: Canada’s strong and diversified economy provides abundant job opportunities across various sectors, offering financial stability and career growth for residents. Employment benefits and protections ensure fair treatment and support for workers. - Social Services: Canada offers a wide range of social services and support programs, including child benefits, unemployment insurance, disability benefits, and retirement pensions. These programs help ensure social inclusion and provide assistance to those in need. - Community Engagement: Canadians value community engagement and social connections, with vibrant communities and neighborhood associations promoting social interaction and support networks. - Work-Life Balance: Canada emphasizes work-life balance, with policies supporting flexible work arrangements, parental leave, and vacation time. Residents have time to pursue their interests, spend time with family and friends, and enjoy leisure activities. Conclusively, living in Canada offers a high quality of life characterized by access to essential services, safety, cultural diversity, natural beauty, economic opportunities, and a strong sense of community. These factors contribute to the overall happiness and well-being of residents, making Canada a desirable place to call home. Top Tourist Attractions in Canada: Explore the Beauty Canada is renowned for its breathtaking natural landscapes, vibrant cities, and rich cultural heritage, offering a diverse array of tourist attractions for visitors to explore and enjoy. Here are some of the top tourist attractions in Canada: - Niagara Falls: Located on the border between Ontario and New York, Niagara Falls is one of the most iconic natural wonders in the world. Visitors can marvel at the awe-inspiring sight of the powerful waterfalls, take boat tours to get up close to the falls, and explore nearby attractions such as Clifton Hill and Niagara Parks. - Banff National Park: Situated in the Canadian Rockies of Alberta, Banff National Park is a UNESCO World Heritage Site known for its stunning mountain scenery, turquoise lakes, and abundant wildlife. Visitors can hike scenic trails, soak in natural hot springs, and enjoy outdoor activities such as skiing, snowboarding, and wildlife viewing. - Vancouver: Vancouver, located on the west coast of British Columbia, is a vibrant city surrounded by mountains and ocean. Visitors can explore attractions such as Stanley Park, Granville Island, and Capilano Suspension Bridge, as well as enjoy outdoor activities like hiking, biking, and kayaking. - Old Quebec City: Quebec City is a charming historic city with cobblestone streets, fortified walls, and European-style architecture. Visitors can explore attractions such as Château Frontenac, Place Royale, and Petit-Champlain, as well as immerse themselves in the city’s rich French Canadian culture and cuisine. - Whistler: Whistler, located in the Coast Mountains of British Columbia, is a world-renowned ski resort destination. Visitors can enjoy skiing, snowboarding, and snowshoeing in the winter, as well as mountain biking, hiking, and zip-lining in the summer. The village also offers shopping, dining, and nightlife options. - CN Tower: Located in Toronto, Ontario, the CN Tower is an iconic landmark and one of the tallest freestanding structures in the world. Visitors can take a ride to the top of the tower for panoramic views of the city and Lake Ontario, as well as enjoy dining at the revolving restaurant or testing their courage on the EdgeWalk. - Montreal: Montreal is a vibrant and multicultural city known for its arts, culture, and culinary scene. Visitors can explore attractions such as Old Montreal, Mount Royal Park, and the Montreal Museum of Fine Arts, as well as enjoy festivals, concerts, and events throughout the year. - Canadian Rockies: The Canadian Rockies, located in Alberta and British Columbia, are a stunning mountain range known for their rugged peaks, turquoise lakes, and dramatic landscapes. Visitors can explore national parks such as Jasper, Yoho, and Kootenay, as well as drive along the scenic Icefields Parkway. These are just a few of the top tourist attractions in Canada, showcasing the country’s natural beauty, cultural diversity, and outdoor adventure opportunities. Whether you’re interested in exploring vibrant cities, immersing yourself in nature, or experiencing rich history and culture, Canada has something to offer for every traveler. Available Canada Visa Programs: Your Options Canada offers a range of visa programs for individuals seeking to visit, work, study, or immigrate to the country. Here are some of the available visa programs and options: - Visitor Visa (Temporary Resident Visa): This visa allows individuals to visit Canada for tourism, visiting family or friends, or attending business conferences or events. It is typically issued for a short duration, and applicants may need to demonstrate ties to their home country to prove their intention to return. - Study Permit: International students wishing to study at a designated learning institution (DLI) in Canada need to obtain a study permit. This permit allows students to study full-time in Canada and may also allow them to work part-time during their studies and gain valuable work experience through co-op or internship programs. - Work Permit: Foreign workers who have a job offer from a Canadian employer may apply for a work permit to legally work in Canada. There are various types of work permits available, including open work permits, employer-specific work permits, and post-graduation work permits for recent graduates of Canadian institutions. - Express Entry: The Express Entry system is Canada’s main immigration pathway for skilled workers. It manages applications for three federal economic immigration programs: the Federal Skilled Worker Program, the Federal Skilled Trades Program, and the Canadian Experience Class. Candidates are ranked based on factors such as age, education, work experience, and language proficiency, and those with the highest scores are invited to apply for permanent residency. - Provincial Nominee Programs (PNPs): Canada’s provinces and territories operate their own immigration programs, known as Provincial Nominee Programs (PNPs). These programs allow provinces to nominate individuals who have the skills, education, and work experience needed to contribute to the local economy. PNPs often target specific occupations or industries that are in demand in a particular province or territory. - Family Sponsorship: Canadian citizens and permanent residents can sponsor their family members for immigration to Canada. This includes spouses, common-law partners, dependent children, parents, and grandparents. Sponsors must meet certain eligibility criteria and demonstrate the ability to support their sponsored family members financially. - Start-Up Visa: The Start-Up Visa program is designed to attract entrepreneurs with innovative business ideas to Canada. Successful applicants receive permanent residency and are expected to establish their business in Canada and create jobs for Canadians. - Refugee and Humanitarian Resettlement: Canada has a strong commitment to refugee resettlement and humanitarian immigration. The Refugee and Humanitarian Resettlement Program provides protection and assistance to refugees and individuals in need of humanitarian aid. These are some of the available visa programs and options for individuals wishing to visit, work, study, or immigrate to Canada. Each program has its own eligibility criteria, application process, and requirements, so it’s important to carefully research and choose the program that best suits your circumstances and goals. How to Apply for Canada Visa Programs 2024: A Step-by-Step Guide Applying for a Canada visa program in 2024 involves several steps, depending on the type of visa you are seeking. Here’s a general step-by-step guide to help you navigate the application process: - Determine Your Eligibility: Before applying for a Canada visa program, ensure that you meet the eligibility requirements for the specific program you are interested in. Each visa program has its own criteria, such as age, education, work experience, language proficiency, and financial resources. - Choose the Right Visa Program: Research and select the most suitable visa program based on your purpose of travel, whether it’s for tourism, study, work, or immigration. Consider factors such as your qualifications, skills, and intended duration of stay in Canada. - Gather Required Documents: Review the list of required documents for your chosen visa program carefully. Common documents may include passport, photographs, application forms, educational transcripts, language test results, employment letters, financial statements, and proof of ties to your home country. - Complete the Application Form: Fill out the visa application form accurately and completely. Ensure that all information provided is truthful and matches the information in your supporting documents. Depending on the visa program, you may need to submit your application online or by mail. - Pay the Application Fee: Pay the required visa application fee using the accepted payment methods. The fee amount varies depending on the type of visa and processing times. Keep a copy of the payment receipt for your records. - Submit Your Application: Submit your visa application along with all required documents to the designated visa application center or immigration office. If applying online, follow the instructions for uploading your documents and paying the fee electronically. - Attend Biometrics Appointment (if applicable): Depending on your nationality and visa program, you may be required to provide biometric information, such as fingerprints and a digital photograph, at a designated biometrics collection center. Schedule and attend your biometrics appointment as instructed. - Wait for Processing: After submitting your visa application, wait for it to be processed by the Canadian immigration authorities. Processing times vary depending on the visa program, the volume of applications, and other factors. You can check the status of your application online using the tracking number provided. - Attend Interview (if required): In some cases, you may be required to attend an interview as part of the visa application process. Prepare for the interview by familiarizing yourself with the visa requirements and being ready to answer questions about your background, intentions, and plans in Canada. - Receive Visa Decision: Once your visa application has been processed, you will receive a decision on your application. If approved, you will receive your visa and any accompanying documents. If refused, you will be notified of the reasons for the refusal and any options for appeal or reapplication. - Travel to Canada: If your visa application is approved, make travel arrangements to Canada according to the terms and conditions of your visa. Ensure that you have all necessary documents and comply with any additional requirements, such as health insurance or quarantine measures. - Comply with Visa Conditions: Upon arrival in Canada, comply with the conditions of your visa, including the duration of stay, work or study restrictions, and any other requirements. Familiarize yourself with Canadian laws and regulations to ensure a smooth and enjoyable stay in the country. By following these steps and submitting a complete and accurate visa application, you can increase your chances of success in obtaining a Canada visa in 2024. Be sure to consult the official website of Immigration, Refugees and Citizenship Canada (IRCC) for the most up-to-date information and guidance on visa programs and application procedures. FAQs on Canada Visa Lottery As of my last update in January 2022, Canada does not have a visa lottery program. However, many individuals express interest in such a program due to its potential to offer a pathway to Canadian immigration. Here are some frequently asked questions (FAQs) regarding a hypothetical Canada visa lottery: - What is a Canada visa lottery? - A Canada visa lottery would be a program where individuals could apply for a chance to receive a visa to immigrate to Canada. The lottery system would randomly select a certain number of applicants to receive visas. - Does Canada have a visa lottery program like the United States? - No, Canada does not currently have a visa lottery program similar to the Diversity Visa Lottery Program (DV Program) in the United States. - How can I participate in a Canada visa lottery? - Since Canada does not have a visa lottery program, there is no official way to participate in such a program. Individuals interested in immigrating to Canada must explore other immigration pathways, such as skilled worker programs, family sponsorship, or provincial nominee programs. - Is there a fee to enter the Canada visa lottery? - Since there is no Canada visa lottery program, there is no fee to enter. Beware of scams that may claim to offer entry into a Canada visa lottery for a fee. - When will Canada introduce a visa lottery program? - There is no indication that Canada plans to introduce a visa lottery program in the near future. Immigration policies and programs are subject to change based on government priorities and public policy considerations. - What are alternative immigration options for Canada? - Canada offers various immigration pathways for individuals seeking to immigrate, including skilled worker programs like the Express Entry system, Provincial Nominee Programs (PNPs), family sponsorship, and refugee resettlement programs. Prospective immigrants should explore these options based on their qualifications, skills, and circumstances. - How can I stay informed about Canada’s immigration policies and programs? - Stay informed by regularly visiting the official website of Immigration, Refugees and Citizenship Canada (IRCC) for updates on immigration policies, programs, and application procedures. Additionally, consider consulting with immigration professionals or authorized representatives for personalized guidance and advice. It’s important to note that immigration policies and programs can change over time, so it’s essential to rely on credible sources for information about Canada’s immigration system. Conclusion – Canada Visa Lottery In conclusion, while many individuals express interest in a Canada visa lottery as a potential pathway to immigration, it’s important to clarify that Canada does not currently have such a program. Despite the absence of a visa lottery, Canada offers numerous immigration pathways and programs for individuals seeking to immigrate to the country. Prospective immigrants can explore options such as skilled worker programs like the Express Entry system, Provincial Nominee Programs (PNPs), family sponsorship, and refugee resettlement programs. These pathways provide opportunities for individuals with diverse backgrounds, qualifications, and circumstances to pursue their dreams of living and working in Canada. As immigration policies and programs are subject to change, it’s crucial to stay informed by regularly consulting official sources such as the website of Immigration, Refugees and Citizenship Canada (IRCC). Additionally, seeking guidance from immigration professionals or authorized representatives can provide personalized assistance and ensure compliance with Canadian immigration requirements. While a Canada visa lottery remains a topic of interest for many, individuals interested in immigrating to Canada should focus on exploring existing immigration pathways and pursuing opportunities that align with their qualifications and goals. Leave a Comment

https://travels.footiehound.com/everything-you-need-to-know-

en

For many, pregnancy may not be an easy journey. It may require more fertility work and medical interventions. That’s when the terms IUI and IVF come into the picture. Intrauterine insemination (IUI) and Invitro Fertilisation (IVF) are artificial reproduction modes where partial procedures of natural conception are carried out in a lab. This article explores IUI and IVF in detail- what they entail, the ideal candidates, and knowing which is better for your condition. In this Article - 1 The Basics: IUI and IVF - 2 The Benefits: IUI V/s IVF - 3 Success rates: IUI and IVF - 4 Donor options in IUI and IVF - 5 Frequently Asked Questions - 6 Conclusion The Basics: IUI and IVF If you are unable to get pregnant naturally, your fertility specialist may recommend IUI and IVF as fertility treatments. The treatments are ideal when considering, donor sperm usage, same-sex couples, and single parents who want to have children by choice. What is IUI? IUI treatment is a fertility-enhancing procedure where the sperm is retrieved, processed, and placed in the woman’s uterus. Thus, eventually reducing the sperm journey, bypasses its travel directly into the uterus, and gives a fair chance of reaching the egg for fertilisation. During IUI, the semen sample taken or retrieved surgically is washed thoroughly, and the sperms are separated from the seminal fluid. The entire sperm sample is inseminated into the uterus. This procedure can significantly increase the sperm numbers in the uterus over natural intercourse. However, in IUI, timing plays a crucial role. The day after the ovulation is ideal for sperm insemination. And this process is an in-clinic process done in 5 to 10 minutes. The doctor uses a speculum and locates the cervix to insert a thin catheter or tube into the uterus. The sperm sample is passed through the catheter and placed in the uterus for further fertilisation and implantation. IUI procedure can be combined with ovulation induction (OI), where a woman is subjected to fertility medications to stimulate and release mature eggs. OI with IUI is known to give better conception chances in women having ovulatory problems. What is IVF? IVF is an assisted reproduction technique (ART) that involves a few more steps than IUI. Here, the ovaries are initially stimulated with fertility medications to increase the follicular numbers. Nearly 10 to 15 mature eggs after stimulation are retrieved through an outpatient surgery where they are picked up directly from the ovarian follicles. The number of eggs produced can vary depending on maternal age, medical history, and ovarian reserves. The sperms retrieved through conventional ejaculation or surgical sperm retrieval procedures are fertilised with the egg in-vitro (outside the womb). The resulting embryo is either transferred into the uterus or frozen for later use. IVF can be performed with other advanced ART procedures like Laser-assisted hatching, preimplantation genetic testing (PGT), blastocyst embryo transfer, intracytoplasmic sperm Injection (ICSI), and others that can increase IVF success possibilities. The Benefits: IUI V/s IVF IUI and IVF are fertility treatments that have unique roles in treating fertility. However, choosing the right one according to your condition is crucial. This can be done with the help of fertility specialists who can guide you through your underlying infertility status and help you choose the right procedure. While your infertility specialist gets down to evaluating the causes of infertility- including and not limiting to irregular menstrual cycles, ovulation issues, sperm abnormalities, blocked fallopian tubes, and endometriosis. The infertility specialist also reviews criteria, such as maternal age, family history, and medical history. Here are some of the conditions detailing when you can consider an IUI and an IVF treatment When to go for an IUI treatment? IUI is the first line of treatment for couples undergoing unexplained infertility (the cause of infertility cannot be identified), or if the man has a mild male fertility factor. Compared to IVF, IUI treatment costs are less, and the procedure too is less invasive. And so, ideally, it becomes the first step in fertility treatment. When to consider IVF treatment? IVF is generally considered after three to four unsuccessful IUI’s. Some of the other cases where an IVF is an ideal consideration include: - Severe male-fertility issues, - Blocked fallopian tubes that cannot be surgically corrected, - Recurrent miscarriages, - Ovulatory problems. Like IUI, age and family history are also notable factors. And sometimes, IVF may be the first fertility treatment consideration for infertility. Success rates: IUI and IVF It needs a deeper understanding that infertility treatments are a way to achieve infertility. These treatments and their success rates are profoundly associated with numerous factors, including the cause of infertility, age, clinic amenities, doctors’ experience, and much more. Not to forget, these success rates vary between clinics. IVF and IUI can be successful with the first attempt for many, while some may require more attempts. IUI Success rate The overall IUI success rate is nearly 15 to 20%, with attempts considered every consecutive month. Experts usually advise three to four rounds of IUI trials, having a cumulative success rate of 40 to 50%. On average, one in five couples undergoing IUI can have a successful IUI (20% per month). After three to four unsuccessful IUI attempts, IVF may be the next possible line of treatment for aspiring couples. IVF Success rate IVF is a powerful fertility-enhancing tool that addresses many infertility problems. According to statistics, nearly 50 to 75% of IVF can get successful on the first try, provided factors such as age, ovarian reserve, infertility cause, recurrent miscarriage cause, and other success-influencing factors are taken care of. However, in some cases, patients may require two or three IVF trials before a successful IVF conception. According to statistical data, the overall first-attempt success rate is roughly 30 to 35% for women above 40 years and 70 to 80% for women under 35 years in India. According to the National Institute of Health and Care Excellence (NICE), “ The cumulative effect of three full cycles of IVF increases the chances of a successful pregnancy to 45-53%. This is why NICE has recommended 3 IVF cycles as it is the most cost-effective and clinically effective number for women under the age of 40.” Donor options in IUI and IVF Fertility problems in a few can be to an extent where you will need to consider donor options. With advanced assisted reproductive methodologies, donor options have become inclusive of IUI and IVF. IUI Pregnancy with donor sperms IUI addresses mild male fertility issues and unexplained fertility. IUI allows considering donor sperm where the donor sperm can be inseminated for a successful IUI attempt. This can improve IUI pregnancy chances. IVF Pregnancy with donor egg, sperm, or embryo Similarly, in an IVF set-up, donor eggs, sperm, and embryos can be opted for. Popularly known as third-party assisted reproduction, frozen donor gametes, and embryo use can help enhance IVF pregnancy chances. IVF opens to opt for surrogacy in extreme infertility cases where the womb cannot bear the child for the entire pregnancy term. Frequently Asked Questions Which is better, IUI or IVF? Overall, both IUI and IVF have their odds of success. While IUI addresses some of the infertility issues and IVF takes care of many more, the IUI pregnancy rates are lower than IVF. However, IVF is more extensive and invasive compared to IUI. Knowing which suits you better according to your condition and with the assistance of your fertility expert is important. Is IUI painful or IVF? Neither IUI nor IVF is a painful infertility treatment procedure. Both IUI and IVF involve a series of stages that you will need to go through with medications and minimally invasive procedures. Is it worth trying for IUI before an IVF? If your infertility condition can take in both IUI and IVF, your fertility expert may suggest IUI first as IUI is less expensive and extensive than IVF. IUI and IVF are remarkable inclusions for treating fertility and rekindling parenthood aspirations among many couples. Unlike IVF, IUI involves less lab work and embryological studies and is less invasive and expensive. IVF treats several infertility conditions and follows a procedure involving extensive lab work. Both IVF and IUI increase your odds of conception while you can consider donor options with both these treatments. Connect with your fertility specialist to get evaluated for more comprehensive fertility treatment and know which one is better for you, IUI or IVF?

https://pregajunction.com/blog/whats-the-difference-

en

By Emma Ujah & Gabriel Ewepu lake Chad can be replenished with water from the Nubian Sandstone Aquifer, the Director-General (D-G) of the National Water Resources Institute, Kaduna, Prof. Emmanuel Adanu, has disclosed. The Lake with a surface area of about 26,000 square kilometers in the early 1960s has dried up so much that it has been reduced to only about 1,500 square kilometers. Over 10 million people across the Lake Chad region have lost their livelihoods, following the drying up of a large portion of the lake, leaving behind unprecedented poverty, hunger and violence in that region. Consequently, the Lake Chad Basin Commission with members including: Nigeria, Niger, Chad, Cameroun, Algeria, the Central African Republic, Libya, and Sudan, has been considering the possibility of refilling the lake from the Congo River, which is about 2, 400 km away. It is estimated that the ambitious project could gulp as much as between $50 and $60 billion. However, Prof. Adanu, a Hydrogeology expert, has said that the volume of water in the Nubian Sandstone Aquifer was so huge that it could be easily used to replenish Lake Chad, as an alternative to channelling water from the Congo River. ALSO READ: Burkina Faso and Africa’s heritage of coups According to him, “Two years ago, the President had a conference on how to replenish Lake Chad and the countries of the Lake Chad Commission came. Congo was also invited to see how to channel water to fill the Lake Chad. I was one of the resources persons at the conference. “And it was a very ambitious project because it requires about 60 billion Euros to achieve that. First of all, we have to find out how this Lake is shrinking, why and how. “We had lots of theories, and there were two Nigerians, one working with the National Aeronautics and Space Administration (NASA), who came from the US. He brought some fantastic photographs and satellite images- how they were capturing escape of moisture and how it goes elsewhere and not coming back to the earth. “After his presentation, I said his was a complex one as we were looking at it from space and most of us are on the ground, let us look at it from the ground and know what is happening. I told them there is water depletion in the environment. “Some said the rivers sending water there are no more sending water into the Lake because of agricultural activities and climate change. “Then secondly, rainfall reduction in that area, and I said we have put all these together; the water depletion, the quantity based on these, but when you put it against the total volume of water that is receding, I see something hanging there which we cannot account for. “So I brought up the case of the groundwater. We have a Nubian Sandstone Aquiver that is the largest fossil aquiver in the world. It is in the Sahara. “It is under Chad, Egypt, Libya and Sudan. This fossil aquiver is about 11, 000 years old now. The Nubian Sandstone Aquifer seats under the Lake Chad Formation, the Lake Chad Basin “The Lake Chad Basin is a Basin and the Aquifer, there is like a connection between the Lake Chad and the Nubian Sandstone Aquiver; sandstone is a rock and Aquifer is a water bearing formation.” Prof. Adanu said that Libya has been tapping water from the aquiver for some years and that it should also be used to refill Lake Chad. His words, “Libya has a 4-meter diameter pipe of about 2, 400 kilometres taking water to Benghazi, Sirte, and Tripoli. So they take water from this Nubian Sandstone Aquiver. “The distance between the earth surface and the Nubian Aquiver is 500 meters. Libya takes 6.5 million cubic meters of water every day from this aquifer and pumping it to Sirte, Tripoli and Benghazi. So they are taking this water aggressively”. Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

https://www.vanguardngr.com/2022/01/lake-chad-can-be-replenished-from-nubian-

en

Pupils of Methodist Nursery/Primary School, Oshodi, Lagos resume for a new term after the Christmas and New Year celebration. Photo: Diran Oshe Social injustices in Nigerian secondary schools and implications for education reform By Chizoba Imoka Whenever intense discussions about reforming Nigeria’s education system emerges in the public square or policy corridors, they are usually triggered by the release of yet another (!) poor WAEC/Jamb exam results. If you think further, you will see that these discussions are perpetually led by adults and fueled by their ‘21st century’ economic aspirations for Nigerian children. Implicit in these reform narratives (see:1969 curriculum conference,Ezekwesili, 2006 comprehensive reform plans, and the Unified private school examination amongst other) are some faulty assumptions. Firstly, that the success of students as well as the effectiveness of the education system should be determined by student performance in examinations. Therefore, the more we test and examine students, the smarter they will become. Secondly, adults are the experts – they know it all and best. On the other hand, secondary school students are mere recipients of knowledge and their lived experiences/identities have no role in the classroom or on how they experience schooling. Consequently, students’ views do not have a central place in the education reform process. Thirdly, that Nigeria is a “post-colonial” society and schools are neutral spaces that do not absorb the unjust social relations and histories that occur in the broader society. But, how valid are these assumptions? What can the experiences of young Nigerians tell us about what needs to change in the Nigerian education system? Preliminary findings from my ongoing doctoral research project shows the need to include student experiences and views in efforts aimed at making Nigeria’s education system culturally responsive, just and inclusive for all. Based on the responses from 1500+student survey entries and interviews with ten students from private and public Nigerian secondary schools, it is clear that student-learning and schooling experiences are heavily influenced by their social class, ethnicity and the stereotypes associated with their ethnic groups. There appears to be blatant discrimination against certain students by teachers, bullying between students and emotional abuse by school authorities especially when it comes to student grades. There is also a lot of variation in teaching and in some high cost private schools, the Nigerian curriculum seems to be reinterpreted to suit the agenda of the private school’s while absorbing the power dynamics of the local community. Below are some highlights: 1) Almost every student that filled out my questionnaire has said that they were severely punished (some were sent to detention!) or made to pay a fine when they spoke their indigenous languages in school. English was the superior language. 2) A self- identified “Hausa-Fulani” female student that I interviewed talked about the predominant perception in her Federal government school which suggested that Hausa students are not smart while the Igbos are deemed to be smart. So, whenever she/any Hausa girl puts her hands up in class to answer a question, the teacher skips them and goes for the Igbo girl. When she gives a “chorus” answer (screams out the answer) even when the Igbo student fails the question, she was punished. She talked about how this became a self-fulfilling prophecy amongst Hausa girls… their teachers did not expect more from them, so they did not bother. 3) The Igbo girl that I interviewed attended a high cost Catholic private school in eastern Nigeria – she talked about how she was taught in an insular way, as if the best identity one could be is Catholic and Igbo. So, students who were not Igbo felt excluded in the school. Even though you are not Catholic, you were forced to do all the Catholic norms. 4) Two students I interviewed were from Kogi and Akwa Ibom. They attended high cost private schools in Abuja and they talked about the intense bullying non-Hausa’s experienced in school. They talked about how “cliquey” the Hausa students were in their school and how they always spoke Hausa and out rightly tried to castigate anyone they thought was Igbo or simply not Hausa. To belong was to speak Hausa. Even the teachers spoke Hausa to the students but the male participant said when he tried to speak his indigenous language with his brother, he was shunned. The girl shared an experience where a Hausa classmate came to her to tell her that she hated Igbos, thinking she was Igbo… but she is Igala, and from Kogi state. I asked why they didn’t report these issues, they said teachers/administration ignored these issues simply because of who they thought their parents were or trivialized it as student banter. The participant from Akwa Ibom said that things got out of hand in his school that a bloody fight broke out after exams between non-Hausa’s vs. Hausas. 5) My participant who is from Akwa Ibom shared that a teacher said something very offensive about Akwa Ibom people. He reported to the principal and the teacher got fired. But he believes that the teacher got fired simply because of who they thought his father was. 6) One of my participants went to a Foreign (e.g: Chinese, Turkish, Japanese) Nigerian secondary school – she talked about how they were mandated to learn the foreign language (not English or French, e.g. Chinese, Turkish, Japanese) till SS2 but questioned why Nigerian languages were stopped at JSS2. She says that they also had to sing the anthem of the country every day. 7) My last two interviewees were neither Igbo, Hausa or Yoruba – even though Nigerian languages was offered, none of theirs was an option. The female participant said she felt like another line in the school’s balance sheet. These is so much to say about these experiences, but, what is clear is that our schools are a microcosm of the Nigerian society. The ethnic divisions that play out in broader society are alive and well in our schools and amongst our teenagers. Interviewing students in a way that affirmed their numerous social identities (ethnic, religious, social class), talents and personal aspirations revealed these ethnic tensions. From these student experiences, it is also clear that our schools are not politically neutral.They are in fact social sites where social inequalities and unjust social relations are reproduced, consolidated and sustained. But this doesn’t have to be so. Schools could also be sites for students to be equipped with the knowledge they require to disrupt the social inequalities and unjust social relations in our society. So, in thinking about how to change the Nigerian education system, not only do we need to solicit the views of students, we must put students at the center of the discussion. In doing so, we must look at students as whole and complex beings with multiple identities (ethnic, religious, economic, political, etc) that shape how they learn, engage and succeed/ fail in school. Consequently, all these identities must be honored, engaged and negotiated with in the process of facilitating student development. Just as important, we must uphold the symbiotic relationship between our students, schools and the society at large. Schools do not operate in a social silo. Students don’t stop being who they are in the broader society once they enter schools. Therefore, in thinking about changing our education system, we must also think about changing our society at large. If some students report feeling excluded and punished simply because they are not from a “major” ethnic group or hold unique beliefs or come from a less affluent families, this is selective discrimination and it is what it is – unjust! We musttackle it head on, defend all children and ask urgent philosophical questions of ourselves: what needs to change in the way Nigerian citizenship is currently defined and operationalized to ensure that students who are not Ibo, Yoruba or Hausa still feel just as important in the classroom/school curriculum?Of course, this is an ongoing question that overflows into broader national conversation about federalism and the need for Nigeria to in practice, pursue a multicultural national framework based on equity, justice and inclusion for all. In the interim, a lot can be done at the policy, civil society and school level. Curriculum wise, we must identify specific content that needs be included in the curriculum to ensure our children learn to honour themselves as evolving complex yet holistic beings, their cultural heritage and fulfil their existential responsibility of incorporating the noble aspirations/struggles of their ancestors into their human endeavours while enriching the world through their unique cultural root. Our curriculum must also help students learn about shared histories between ethnic groups and appreciate the value of diversity. Doing this goes beyond the sad situation we currently see in schools where our indigenous knowledge systems and heritage are relegated to a few “cultural days” and simplified to the showcase of food, dance and clothes that are mostly imported from China! At the very least, we must develop a mandatory decolonial course that seeks to unify secondary students through their indigenous and national histories to interrogate these perceptions students/teachers have about each other, show what we have in common while affirming each other’s rights to be different. Many innovative approaches can be considered in teaching such a course – providing an environment in which students from different ethnic groups work on critical projects together and learn about each other’s history and heritage in the process; encourage projects where students can create a theme song/anthem with a new language – this new language could be an amalgamation of different languages/histories/aspirations; encouraging students to share experiences of inclusion/exclusion and privilege both in school and outside of school; bringing in elders (especially from the “minor” (this word needs to be scrapped from our national lingo!) ethnic groups) into the classroom to share their experiences, exposing students to videos/literature that reveals pre-colonial trade/social linkages between African communities and how these linkages were critical in securing independence victory across the continent. Such a course will only thrive within a broader schooling context and society that centres justice, honours every student as an equal cultural being and draws from their diverse knowledge systems/experiences to teach mainstream subjects and reinvent our reality. The student accounts of being punished and some detained for speaking their indigenous language in school brings to the fore the decolonizing and anti-colonial imperative of educational change in Nigeria. It is about time that we re-negotiate our relationship with English language. The paradox with our obsession with English is our collective immunity to the dehumanization associated with the language. Interestingly, no matter our high we go in Western education or how polished our English is, as Black people, we will never be “English” enough for the White person. For example, in Canada, a handful of white Canadians have expressed sincere amazement at the quality of my English. Upon hearing me speak, they ask: “How come you speak such good English?” Yet, I have spoken English my entire life as if it were my mother tongue! I am not even fluent in my indigenous language, Igor. When you are even accepted as a good English speaker, your accent is called into question! They say, “you speak too fast”, “you don’t enunciate well”. But in our globally diverse English world, whose English is the yard stick of perfect enunciation and accents? Even after we all go to school in Nigeria in English and go ahead to London or America to obtain a Masters’ degree, as a Nigerian citizen that wants to do a doctorate, you must still show proof of English by paying to write a test! To an extent, this is bewilderment with my competence in English is understandable. The White person that asks such a question rightfully acknowledges that I am culturally different from them. Although, she/he may also associate English with intelligence, an attribute that a racist mind assumes is absent in non-Whites. So, why are Nigerian schools and parents not educating children not to be able to fully substantiate their cultural difference – through language, stories,self-knowledge, et? Instead, we are taught to be English/western imposters with experiences and aspirations like the English. As a nation, it is self-destructive and intellectually lazy for us to imagine that the only way we can survive as a unified country is to position a foreign language, English, superior to our indigenous languages and experiences. I understand and appreciate the convenience associated with English language serving as a unifier. But this doesn’t warrant that our indigenous languages be regarded as vernacular and students being punished for speaking their indigenous language. Lastly, no one can over emphasize the role of parents/homes in laying the foundation and setting the expectation for what it means to be a successful child in a racist world such as the one we live in. Sadly, poverty and unreasonable work hours in Nigeria is drawing parents apart from their children and in more cases now, breaking families apart. Nevertheless, Nigerian parents need a decolonization, social justice and healing retreat. In the quest to make their children “globally competitive”, affluent parents especially demand all sorts of divisive and colonizing experiences in private schools. But as many young students who eventually go abroad to study will tell you, the KKK and racist class mates/bus drivers care less about who your parents are or the side of Lagos you lived-in or the secondary school you attended, all that matters is that you are Black and your ancestors are slaves! Indeed, racism no dey look Black man face. Whatever change that can happen in our schools and society at large owe a great deal to the role our parents play in modelling what is important and the environment that is made available to children at home and beyond. PTA’s must be retooled to deal with these issues and help parents teach their kids better and demand that their schools open the minds of their children. And to say the least, teacher training must be REVAMPED!! But this one is a discussion for another day! Chizoba Imoka is a PhD candidate in Educational Policy & Leadership at Ontario Institute of Studies in Education, University of Toronto. She is also the CEO of Unveiling Africa, a non-profit that provides a platform for Nigerian teenagers to participate in community mobilization, civic and political advocacy. She can be reached at [email protected] Comments expressed here do not reflect the opinions of Vanguard newspapers or any employee thereof.

http://www.vanguardngr.com/2017/03/hausa-students-not-smart-igbos-deemed-

en

6th October, 2019 Port Harcourt, the capital of Rivers State derived its name from a British rapist and paedophile, Lord Lewis Vernon Harcourt. Although, this was disclosed by controversial former Aviation Minister, Femi Fani-Kayode, who asked for the change of the name, search showed that he was right. History records that Harcourt enjoyed to have sexual liaisons with both underage girls and boys. Harcourt was born at Nuneham Courtenay, Oxfordshire, on 31 January 1863, the only surviving son of politician Sir William Vernon Harcourt and his first wife, Theresa Lister. He was originally christened with the name Reginald, in honour of his father’s university friend Reginald Cholmondeley, but when George Cornewall Lewis died just over two months after, he was rechristened Lewis. According to Wikipedia, Harcourt never knew his mother, who died only a day after giving birth to him. His elder brother, Julian Harcourt, died the previous year. He was educated at Eton. Port Harcourt, capital of Rivers State in southern Nigeria, is named after him. When the port was established in 1912, there was much controversy about the name it should receive. In August 1913, the Governor-General of Nigeria, Sir Frederick Lugard wrote to Harcourt, then Secretary of State for the Colonies, that “in the absence of any convenient local name, I would respectfully ask your permission to call this Port Harcourt”. The Secretary of State replied, “It gives me pleasure to accede to your suggestion that my name should be associated with the new Port” Harcourt was known in London Society a sexual predator of the young of both genders. He attempted to sexually assault Dorothy Brett, the daughter of Viscount Esher, when she was about 15. Dorothy Brett wrote of him that “It is so tiresome that Loulou is such an old roué. He is as bad with boys as with girls… he is simply a sex maniac. It isn’t that he is in love. It is just ungovernable sex desire for both sexes.” In 1922, Harcourt committed suicide via potassium bromide, following an attempt to seduce Edward James, a young Etonian, who later became an important collector of surrealist and other contemporary art. James’s mother spread the story throughout Society. However, the accusations remained unknown by the wider public for fifty years. Harcourt died in his sleep at his London townhouse at 69, Brook Street (now Savile Club) in the early hours of 24 February 1922, aged 59. An inquest was held as to the cause of death, which was ruled accidental; the underlying cause being given as heart failure and sudden oedema of the lungs brought on by a dose of Bromidia, which he had been prescribed as a sleep aid. According to the coroner, who found extensive heart disease, the amount of Bromidia he had taken would not have caused death in a healthy person. According to his valet, there was only a very small amount of Bromidia left in the bottle the prior evening, which Harcourt did not take regularly.

https://pmnewsnigeria.com/2019/10/06/revealed-port-harcourt-named-after-a-

en

The New World Translation, the Bible produced and used by Jehovah’s Witnesses, inserts the name “Jehovah” into the New Testament some 237 times. The Greek New Testament manuscripts do not contain the name YHWH in any of these places, but Jehovah’s Witnesses argue that the original copies did and that scribes actively changed the name of God into the word “Lord.” The unanimous, early testimonies of New Testament manuscripts, translations, and quotations in other Christian (and even heretical) writings all agree together against this teaching, but Jehovah’s Witnesses insist that it must be true and argue for it through other means. Among their arguments is that there are names and other words in the New Testament that contain the divine name in an abbreviated form. “At Revelation 19:1, 3, 4, 6, the divine name is embedded in the word ‘Hallelujah.’ This comes from a Hebrew expression that literally means ‘Praise Jah.’ ‘Jah’ is a contraction of the name Jehovah. Many names used in the Christian Greek Scriptures were derived from the divine name. In fact, reference works explain that Jesus’ own name means ‘Jehovah Is Salvation.'”1 This is true, but it doesn’t prove anything at all. No one questions that there were popular names among first-century Jews that contained the name of God, like Matthew (which means “gift from YHWH”) or John (which means YHWH is gracious), and that many people in the New Testament have such names. Are the Jehovah’s Witnesses seriously trying to argue that anyone who has written about people with these names must have also used the name YHWH directly throughout their writings? This is obviously unreasonable. There are all kinds of writings (both ancient and modern) that reference people with such names but do not utilize the divine name itself. The fact that the New Testament writers mention these names does not justify inserting the name “Jehovah” in place of words like “Lord’ or “God.” Translating means rendering what the person actually said into another language, not what you think they should have said or what you really wish they had said. When the New Testament authors write “Matthew” we should keep it as “Matthew” and when they write “Lord” we should keep it as “Lord.” The fact that Matthew means “Gift from YHWH” doesn’t mean we can just throw YHWH in the text where ever we want. They also mention the word “Hallelujah,” and of course this is true. The ‘Jah” (or “Yah”) in Hallelujah is an abbreviated form of YHWH. While this is not an instance of the actual name of YHWH being present in the New Testament text, it is a word that directly and meaningfully references that name. Thus, if a Bible translator chose to render this word as “Praise Yahweh” or “Praise Jehovah” instead of transliterating it is “Hallelujah,” there would be no problem there. This approach would be imperfect, as it would ignore the abbreviated form and would fail to capture the fact that, even in the Greek text of Revelation, the word is a transliteration from the Hebrew as “Hallelujah” and is left untranslated by the original author. Still, such a translation would at least be drawing from the actual meaning of the word. If all that Jehovah’s Witnesses were suggesting was to translate “Hallelujah” as “praise Jehovah” in this one chapter of Revelation, there would be no argument. But that is not what they are suggesting. This is not a simple matter of translation approach. The word “Amen” is also a Hebrew word transliterated into the Greek, and we likewise transliterate it into English as “Amen” without translating it. This is a normal and fair practice, and the Jehovah’s Witnesses agree when it comes to words like “Amen.” Even when it comes to “Hallelujah,” they render it as “Praise Jah” rather than “Praise Jehovah,” because, strictly speaking, the full name of YHWH is not in the text here. So this is not an argument about how to translate hallelujah into English. The use of a Hebrew word that contains an abbreviation of YHWH in one chapter of one book does not somehow prove that the original text of the New Testament used the full name YHWH all over the place or even at all. It does not point to a need to “restore” the text by putting the name YHWH where ever one thinks it should be. One cannot substantiate inserting Jehovah 237 times in 27 New Testament books based on the presence of Hallelujah four times in one chapter of Revelation. What’s more, if anything this points the opposite direction. If scribes were systematically suppressing any reference to the name YHWH, why would they have left the obvious instance of the word “hallelujah”? You only have two options. Perhaps they didn’t change it because they were faithfully copying what was in the text. If so, then they were not altering the text, and the Jehovah’s Witness theory about changing the name of God fails. On the other hand, maybe they didn’t change it because Greek speakers back then didn’t know that it was a reference to YHWH, so they just overlooked it. Maybe they used it as a more general term of praise for God without regard to the Hebrew origin of the word. Of course, if this is so, the original author writing in Greek to Greek speakers was probably using it the same way, and you can’t count it as a reference to the name of YHWH at all. Either way, these instances don’t help the Jehovah’s Witness case. Instead, they provide at least circumstantial evidence that the scribes were trying to preserve the text exactly as they found it, which speaks against a theory of some widespread effort to alter the text and remove the name of God. At any rate, we have more than sufficient grounds to be confident that the text of the New Testament has come down to us reliably and that we can know what it really says, even in the titles used for God. 1↑ | New World Translation: 2013 revision, Appendix A5 |

http://ow.ly/8zi850MjFVi

Religion

en

How ‘15 Days to Slow the Spread’ Became a Year When the only tool you have is a lockdown, everything looks like it needs to be locked down. A pastor put out a humorous Twitter poll a few months ago asking how people interpreted “15 days to slow the spread.” Referencing religious debates about creation, the options were as follows. - 15 literal days - 15 ages - 14 literal days, big gap, 15th day - Entirely metaphorical The joke raises a serious point. “15 days to slow the spread” has turned out to be anything but literal. Indeed, it’s now been over a year. Whereas lockdowns were originally sold as a short-term measure to “flatten the curve” and avoid overwhelming the medical system, they have now become the knee-jerk policy response for politicians whenever case numbers so much as inch upwards. But why the shifting goalposts? Why have we become so wedded to a strategy that was only meant to be temporary (and has proven to be largely ineffective)? The answer, ostensibly, is concern for public health. But there’s another possible explanation having to do with psychology. A Fixed Mindset There’s a well-known cognitive bias called anchoring bias, which is the tendency to fixate on an initial piece of information or approach when making decisions. Even when our starting approach clearly flops, we tend to stubbornly stick to the track we’re already on. Instances of anchoring bias are everywhere. In chess, for example, players have an impulse to make the first decent move that comes into their head without thinking through all the other options. Hence, a frequently cited maxim in chess is: “when you find a good move, look for a better one.” Our approach to schooling also suffers from this problem. The traditional lecturing method has become the familiar, default teaching style, even though it’s poorly suited for many students. Alternative approaches such as collaborative problem-solving, self-guided education or experiential learning are not pursued as much as they should be because many teachers and institutions are anchored to the lecture-based approach. The same thing is likely happening with the response to COVID-19. Since lockdowns were the first major policy consideration, they became the focal point of response efforts. Hence, the search for alternative solutions was prematurely cut short because we figured we had already found the tool we needed. But the problem with relying on the first tool we find is that we start to assume that it’s the best tool for every job. As the saying goes, “if the only tool you have is a hammer, everything looks like a nail.” Indeed, with lockdowns in hand, politicians began whacking away at everything they could find. Businesses? Close them. Churches? Shut them down. Schools? Don’t even think about it. No matter what the context was, lockdowns were the prescribed solution in just about every case, and they continue to be widely used to this day. The problem, of course, is that lockdowns have proven to be a dreadfully ill-suited tool for the job. It’s like trying to use a hammer to drive in a screw. It’s a brute force method that will be unrefined at best, and you’ll probably just end up breaking something while failing to achieve your objective. Indeed, lockdowns have wreaked havoc on people’s lives, and they have yet to produce any significant benefits. Some Possible Alternatives So what would be a better approach? Well, one idea would be to remove restrictions on the development of testing kits. If private companies were allowed to develop and sell their own kits as they saw fit, testing would likely become far more affordable and ubiquitous, to the point where everyone could get tested weekly or even daily. With widespread testing in place, asymptomatic carriers would know to stay home if they test positive, and everyone else would be able to go on with their lives as normal because they would know that they don’t have the virus. Another approach would be to remove barriers to vaccine development, such as lengthy trial requirements and other regulations. If private companies were allowed to compete in a free market for vaccines, they could develop safe and effective products in very short order and at a fraction of the cost. Ironically, it is government health agencies that are putting up the biggest barriers to these alternative solutions. They think their heavy-handed approach will make things better, but in reality the best thing they can do is get out of the way. How to Overcome Anchoring Anchoring on the first solution we think of is a universal human tendency, of course, but it tends to be especially pervasive in governments. From schooling to lockdowns to just about every other matter, governments tend to be stuck in their ways and slow to adjust. This isn’t just a coincidence, however. In fact, it’s the natural result of the incentives that are built into the system. Since governments don’t face competition and taxpayers have no choice but to fund them, there is no pressure for them to put in the effort to innovate or improve. As a result, ineffective and harmful practices tend to stick around, even long after their deficiencies have come to light. But free markets are different. Since private companies face competition and their customers can walk away, they have to constantly adapt their practices to meet people’s needs as best as possible. Businesses that come up with new and better solutions are rewarded with higher profits and are thus encouraged to grow, whereas companies that are stuck in the past quickly suffer losses and eventually go out of business. Free markets, then, are the key to overcoming anchoring bias. Indeed, competition and consumer choice are the primary drivers of innovation and progress. With governments on the other hand….well, let’s just hope the lockdowns don’t last another year. Patrick Carroll has a degree in Chemical Engineering from the University of Waterloo and is a Eugene S. Thorpe Writing Fellow at the Foundation for Economic Education. Copyright 2021 Fee.org. Republished with permission.

https://stream.org/how-

en